startup_stm32f10x_ld.c

STM32 库文件

/**
 ******************************************************************************
 * @file      startup_stm32f10x_ld.c
 * @author    MCD Application Team
 * @version   V3.0.0
 * @date      04/06/2009
 * @brief     STM32F10x Low Density Devices vector table for RIDE7 toolchain.
 *            This module performs:
 *                - Set the initial SP
 *                - Set the initial PC == Reset_Handler,
 *                - Set the vector table entries with the exceptions ISR 
 *                  address.
 *                - Branches to main in the C library (which eventually
 *                  calls main()).
 *            After Reset the Cortex-M3 processor is in Thread mode,
 *            priority is Privileged, and the Stack is set to Main.
 *******************************************************************************
 * @copy
 *
 * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
 * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
 * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
 * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
 * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
 * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
 *
 * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
 */

/* Includes ------------------------------------------------------------------*/
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define WEAK __attribute__ ((weak))

/* Private macro -------------------------------------------------------------*/
extern unsigned long _etext;
/* start address for the initialization values of the .data section. 
defined in linker script */
extern unsigned long _sidata;

/* start address for the .data section. defined in linker script */    
extern unsigned long _sdata;

/* end address for the .data section. defined in linker script */    
extern unsigned long _edata;
    
/* start address for the .bss section. defined in linker script */
extern unsigned long _sbss;

/* end address for the .bss section. defined in linker script */      
extern unsigned long _ebss;  
    
/* init value for the stack pointer. defined in linker script */
extern void _estack;  
  
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
void Reset_Handler(void) __attribute__((__interrupt__));
extern int main(void);
void __Init_Data(void);

/******************************************************************************
*
* Forward declaration of the default fault handlers.
*
*******************************************************************************/
void WEAK Reset_Handler(void);
void WEAK NMI_Handler(void);
void WEAK HardFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK BusFault_Handler(void);
void WEAK UsageFault_Handler(void);
void WEAK MemManage_Handler(void);
void WEAK SVC_Handler(void);
void WEAK DebugMon_Handler(void);
void WEAK PendSV_Handler(void);
void WEAK SysTick_Handler(void);

/* External Interrupts */
void WEAK WWDG_IRQHandler(void);
void WEAK PVD_IRQHandler(void);
void WEAK TAMPER_IRQHandler(void);
void WEAK RTC_IRQHandler(void);
void WEAK FLASH_IRQHandler(void);
void WEAK RCC_IRQHandler(void);
void WEAK EXTI0_IRQHandler(void);
void WEAK EXTI1_IRQHandler(void);
void WEAK EXTI2_IRQHandler(void);
void WEAK EXTI3_IRQHandler(void);
void WEAK EXTI4_IRQHandler(void);
void WEAK DMA1_Channel1_IRQHandler(void);
void WEAK DMA1_Channel2_IRQHandler(void);
void WEAK DMA1_Channel3_IRQHandler(void);
void WEAK DMA1_Channel4_IRQHandler(void);
void WEAK DMA1_Channel5_IRQHandler(void);
void WEAK DMA1_Channel6_IRQHandler(void);
void WEAK DMA1_Channel7_IRQHandler(void);
void WEAK ADC1_2_IRQHandler(void);
void WEAK USB_HP_CAN1_TX_IRQHandler(void);
void WEAK USB_LP_CAN1_RX0_IRQHandler(void);
void WEAK CAN1_RX1_IRQHandler(void);
void WEAK CAN1_SCE_IRQHandler(void);
void WEAK EXTI9_5_IRQHandler(void);
void WEAK TIM1_BRK_IRQHandler(void);
void WEAK TIM1_UP_IRQHandler(void);
void WEAK TIM1_TRG_COM_IRQHandler(void);
void WEAK TIM1_CC_IRQHandler(void);
void WEAK TIM2_IRQHandler(void);
void WEAK TIM3_IRQHandler(void);
void WEAK I2C1_EV_IRQHandler(void);
void WEAK I2C1_ER_IRQHandler(void);
void WEAK SPI1_IRQHandler(void);
void WEAK SPI2_IRQHandler(void);
void WEAK USART1_IRQHandler(void);
void WEAK USART2_IRQHandler(void);
void WEAK EXTI15_10_IRQHandler(void);
void WEAK RTCAlarm_IRQHandler(void);
void WEAK USBWakeUp_IRQHandler(void);

/* Private functions ---------------------------------------------------------*/
/******************************************************************************
*
* The minimal vector table for a Cortex M3.  Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
*
******************************************************************************/

__attribute__ ((section(".isr_vector")))
void (* const g_pfnVectors[])(void) =
{       
    &_estack,                   /* The initial stack pointer */
    Reset_Handler,              /* Reset Handler */
    NMI_Handler,                /* NMI Handler */
    HardFault_Handler,          /* Hard Fault Handler */
    MemManage_Handler,          /* MPU Fault Handler */
    BusFault_Handler,           /* Bus Fault Handler */
    UsageFault_Handler,         /* Usage Fault Handler */
    0,                          /* Reserved */
    0,                          /* Reserved */
    0,                          /* Reserved */
    0,                          /* Reserved */
    SVC_Handler,                /* SVCall Handler */
    DebugMon_Handler,           /* Debug Monitor Handler */
    0,                          /* Reserved */
    PendSV_Handler,             /* PendSV Handler */
    SysTick_Handler,            /* SysTick Handler */

    /* External Interrupts */
    WWDG_IRQHandler,            /* Window Watchdog */
    PVD_IRQHandler,             /* PVD through EXTI Line detect */
    TAMPER_IRQHandler,          /* Tamper */
    RTC_IRQHandler,             /* RTC */
    FLASH_IRQHandler,           /* Flash */
    RCC_IRQHandler,             /* RCC */
    EXTI0_IRQHandler,           /* EXTI Line 0 */
    EXTI1_IRQHandler,           /* EXTI Line 1 */
    EXTI2_IRQHandler,           /* EXTI Line 2 */
    EXTI3_IRQHandler,           /* EXTI Line 3 */
    EXTI4_IRQHandler,           /* EXTI Line 4 */
    DMA1_Channel1_IRQHandler,   /* DMA1 Channel 1 */
    DMA1_Channel2_IRQHandler,   /* DMA1 Channel 2 */
    DMA1_Channel3_IRQHandler,   /* DMA1 Channel 3 */
    DMA1_Channel4_IRQHandler,   /* DMA1 Channel 4 */
    DMA1_Channel5_IRQHandler,   /* DMA1 Channel 5 */
    DMA1_Channel6_IRQHandler,   /* DMA1 Channel 6 */
    DMA1_Channel7_IRQHandler,   /* DMA1 Channel 7 */
    ADC1_2_IRQHandler,          /* ADC1 & ADC2 */
    USB_HP_CAN1_TX_IRQHandler,  /* USB High Priority or CAN1 TX */
    USB_LP_CAN1_RX0_IRQHandler, /* USB Low  Priority or CAN1 RX0 */
    CAN1_RX1_IRQHandler,        /* CAN1 RX1 */
    CAN1_SCE_IRQHandler,        /* CAN1 SCE */
    EXTI9_5_IRQHandler,         /* EXTI Line 9..5 */
    TIM1_BRK_IRQHandler,        /* TIM1 Break */
    TIM1_UP_IRQHandler,         /* TIM1 Update */
    TIM1_TRG_COM_IRQHandler,    /* TIM1 Trigger and Commutation */
    TIM1_CC_IRQHandler,         /* TIM1 Capture Compare */
    TIM2_IRQHandler,            /* TIM2 */
    TIM3_IRQHandler,            /* TIM3 */
    0,                          /* Reserved */
    I2C1_EV_IRQHandler,         /* I2C1 Event */
    I2C1_ER_IRQHandler,         /* I2C1 Error */
    0,                          /* Reserved */
    0,                          /* Reserved */
    SPI1_IRQHandler,            /* SPI1 */
    SPI2_IRQHandler,            /* SPI2 */
    USART1_IRQHandler,          /* USART1 */
    USART2_IRQHandler,          /* USART2 */
    0,                          /* Reserved */
    EXTI15_10_IRQHandler,       /* EXTI Line 15..10 */
    RTCAlarm_IRQHandler,        /* RTC Alarm through EXTI Line */
    USBWakeUp_IRQHandler,       /* USB Wakeup from suspend */  
    0,0,0,0,0,0,0,
    (void *)0xF108F85F          /* @0x108. This is for boot in RAM mode for 
                                   STM32F10x Low Density devices.*/

};

/**
 * @brief  This is the code that gets called when the processor first
 *          starts execution following a reset event. Only the absolutely
 *          necessary set is performed, after which the application
 *          supplied main() routine is called. 
 * @param  None     
 * @retval : None       
*/

void Reset_Handler(void)
{
  /* Initialize data and bss */
   __Init_Data(); 

  /* Call the application's entry point.*/
  main();
}

/**
 * @brief  initializes data and bss sections
 * @param  None
 * @retval : None
*/

void __Init_Data(void)
{
  unsigned long *pulSrc, *pulDest;

  /* Copy the data segment initializers from flash to SRAM */
  pulSrc = &_sidata;

  for(pulDest = &_sdata; pulDest < &_edata; )
  {
    *(pulDest++) = *(pulSrc++);
  }
  /* Zero fill the bss segment. */
  for(pulDest = &_sbss; pulDest < &_ebss; )
  {
    *(pulDest++) = 0;
  }
}

/*******************************************************************************
*
* Provide weak aliases for each Exception handler to the Default_Handler. 
* As they are weak aliases, any function with the same name will override 
* this definition.
*
*******************************************************************************/
#pragma weak MMI_Handler = Default_Handler
#pragma weak MemManage_Handler = Default_Handler
#pragma weak BusFault_Handler = Default_Handler
#pragma weak UsageFault_Handler = Default_Handler
#pragma weak SVC_Handler = Default_Handler
#pragma weak DebugMon_Handler = Default_Handler
#pragma weak PendSV_Handler = Default_Handler
#pragma weak SysTick_Handler = Default_Handler
#pragma weak WWDG_IRQHandler = Default_Handler
#pragma weak PVD_IRQHandler = Default_Handler
#pragma weak TAMPER_IRQHandler = Default_Handler
#pragma weak RTC_IRQHandler = Default_Handler
#pragma weak FLASH_IRQHandler = Default_Handler
#pragma weak RCC_IRQHandler = Default_Handler
#pragma weak EXTI0_IRQHandler = Default_Handler
#pragma weak EXTI1_IRQHandler = Default_Handler
#pragma weak EXTI2_IRQHandler = Default_Handler
#pragma weak EXTI3_IRQHandler = Default_Handler
#pragma weak EXTI4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel1_IRQHandler = Default_Handler
#pragma weak DMA1_Channel2_IRQHandler = Default_Handler
#pragma weak DMA1_Channel3_IRQHandler = Default_Handler
#pragma weak DMA1_Channel4_IRQHandler = Default_Handler
#pragma weak DMA1_Channel5_IRQHandler = Default_Handler
#pragma weak DMA1_Channel6_IRQHandler = Default_Handler
#pragma weak DMA1_Channel7_IRQHandler = Default_Handler
#pragma weak ADC1_2_IRQHandler = Default_Handler
#pragma weak USB_HP_CAN1_TX_IRQHandler = Default_Handler
#pragma weak USB_LP_CAN1_RX0_IRQHandler = Default_Handler
#pragma weak CAN1_RX1_IRQHandler = Default_Handler
#pragma weak CAN1_SCE_IRQHandler = Default_Handler
#pragma weak EXTI9_5_IRQHandler = Default_Handler
#pragma weak TIM1_BRK_IRQHandler = Default_Handler
#pragma weak TIM1_UP_IRQHandler = Default_Handler
#pragma weak TIM1_TRG_COM_IRQHandler = Default_Handler
#pragma weak TIM1_CC_IRQHandler = Default_Handler
#pragma weak TIM2_IRQHandler = Default_Handler
#pragma weak TIM3_IRQHandler = Default_Handler
#pragma weak I2C1_EV_IRQHandler = Default_Handler
#pragma weak I2C1_ER_IRQHandler = Default_Handler
#pragma weak SPI1_IRQHandler = Default_Handler
#pragma weak SPI2_IRQHandler = Default_Handler
#pragma weak USART1_IRQHandler = Default_Handler
#pragma weak USART2_IRQHandler = Default_Handler
#pragma weak EXTI15_10_IRQHandler = Default_Handler
#pragma weak RTCAlarm_IRQHandler = Default_Handler
#pragma weak USBWakeUp_IRQHandler = Default_Handler

/**
 * @brief  This is the code that gets called when the processor receives an 
 *         unexpected interrupt.  This simply enters an infinite loop, preserving
 *         the system state for examination by a debugger.
 *
 * @param  None     
 * @retval : None       
*/

void Default_Handler(void) 
{
  /* Go into an infinite loop. */
  while (1) 
  {
  }
}

/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/