main.c

STM32 库文件

/**
  ******************************************************************************
  * @file I2C/DualAddress/main.c 
  * @author  MCD Application Team
  * @version  V3.0.0
  * @date  04/06/2009
  * @brief  Main program body
  ******************************************************************************
  * @copy
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"

/** @addtogroup StdPeriph_Examples
  * @{
  */

/** @addtogroup I2C_DualAddress
  * @{
  */ 

/* Private typedef -----------------------------------------------------------*/
typedef enum { FAILED = 0, PASSED = !FAILED} TestStatus;

/* Private define ------------------------------------------------------------*/
#define I2C1_SLAVE_ADDRESS7    0x30
#define I2C2_SLAVE1_ADDRESS7   0x30
#define I2C2_SLAVE2_ADDRESS7   0x22
#define BufferSize             4 
#define ClockSpeed             200000

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
I2C_InitTypeDef  I2C_InitStructure;
uint8_t I2C1_Buffer1_Tx[BufferSize] = {1,2,3,4}, I2C1_Buffer2_Tx[BufferSize] = {5,6,7,8};
uint8_t I2C2_Buffer1_Rx[BufferSize], I2C2_Buffer2_Rx[BufferSize];
uint8_t Tx_Idx = 0, Rx_Idx = 0;
volatile TestStatus TransferStatus1 = FAILED, TransferStatus2 = FAILED;  

/* Private functions ---------------------------------------------------------*/
void RCC_Configuration(void);
void GPIO_Configuration(void);
TestStatus Buffercmp(uint8_t* pBuffer1, uint8_t* pBuffer2, uint16_t BufferLength);

/**
  * @brief  Main program
  * @param  None
  * @retval : None
  */
int main(void)
{
  /* System clocks configuration ---------------------------------------------*/
  RCC_Configuration();

  /* GPIO configuration ------------------------------------------------------*/
  GPIO_Configuration();

  /* Enable I2C1 and I2C2 ----------------------------------------------------*/
  I2C_Cmd(I2C1, ENABLE);
  I2C_Cmd(I2C2, ENABLE);

  /* I2C1 configuration ------------------------------------------------------*/
  I2C_InitStructure.I2C_Mode = I2C_Mode_I2C;
  I2C_InitStructure.I2C_DutyCycle = I2C_DutyCycle_2;
  I2C_InitStructure.I2C_OwnAddress1 = I2C1_SLAVE_ADDRESS7;
  I2C_InitStructure.I2C_Ack = I2C_Ack_Enable;
  I2C_InitStructure.I2C_AcknowledgedAddress = I2C_AcknowledgedAddress_7bit;
  I2C_InitStructure.I2C_ClockSpeed = ClockSpeed;
  I2C_Init(I2C1, &I2C_InitStructure);
  /* I2C2 configuration ------------------------------------------------------*/
  I2C_InitStructure.I2C_OwnAddress1 = I2C2_SLAVE1_ADDRESS7;
  I2C_Init(I2C2, &I2C_InitStructure);

  /* I2C2 second address configuration */
  I2C_OwnAddress2Config(I2C2, I2C2_SLAVE2_ADDRESS7);
  /* Enable I2C2 Dual address */
  I2C_DualAddressCmd(I2C2, ENABLE);
     
  /*----- First transmission Phase -----*/
  /* Send I2C1 START condition */
  I2C_GenerateSTART(I2C1, ENABLE);
  /* Test on I2C1 EV5 and clear it */
  while(!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_MODE_SELECT)); 
  /* Send I2C2 slave Address for write */
  I2C_Send7bitAddress(I2C1, I2C2_SLAVE1_ADDRESS7, I2C_Direction_Transmitter);
  /* Test on I2C2 EV1 and clear it */
  while(!I2C_CheckEvent(I2C2, I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED));  
  /* Test on I2C1 EV6 and clear it */
  while(!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED)); 

  /* Send data */
  while (Rx_Idx < BufferSize)
  {
    /* Send I2C1 data */
    I2C_SendData(I2C1, I2C1_Buffer1_Tx[Tx_Idx++]);
    /* Test on I2C2 EV2 and clear it */
    while(!I2C_CheckEvent(I2C2, I2C_EVENT_SLAVE_BYTE_RECEIVED));  
    /* Store received data on I2C2 */
    I2C2_Buffer1_Rx[Rx_Idx++] = I2C_ReceiveData(I2C2);
    /* Test on I2C1 EV8 and clear it */
    while(!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_BYTE_TRANSMITTED)); 
  }

  /* Send I2C1 STOP Condition */
  I2C_GenerateSTOP(I2C1, ENABLE);
  /* Test on I2C2 EV4 and clear it */
  while(!I2C_CheckEvent(I2C2, I2C_EVENT_SLAVE_STOP_DETECTED)); 
  /* Clear I2C2 STOPF flag: read operation to I2C_SR1 followed by a 
     write operation to I2C_CR1 */
  (void)(I2C_GetFlagStatus(I2C2, I2C_FLAG_STOPF));
  I2C_Cmd(I2C2, ENABLE);    
 
  /* Check the corectness of written data */
  TransferStatus1 = Buffercmp(I2C1_Buffer1_Tx, I2C2_Buffer1_Rx, BufferSize);
  /* TransferStatus1 = PASSED, if the transmitted and received data
     are equal */
  /* TransferStatus1 = FAILED, if the transmitted and received data 
     are different */

  /*----- Second transmission Phase -----*/
  /* Reset counters and reception buffer */
  Tx_Idx = Rx_Idx = 0;
  /* Send I2C1 START condition */
  I2C_GenerateSTART(I2C1, ENABLE);
  /* Test on I2C1 EV5 and clear it */
  while(!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_MODE_SELECT));  
  /* Send I2C2 slave Address for write */
  I2C_Send7bitAddress(I2C1, I2C2_SLAVE2_ADDRESS7, I2C_Direction_Transmitter);
  /* Test on I2C2 EV1 and clear it */
  while(!I2C_CheckEvent(I2C2, I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED)); 
  /* Test on I2C1 EV6 and clear it */
  while(!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED));  

  /* Send data */
  while (Rx_Idx < BufferSize)
  {
    /* Send I2C1 data */
    I2C_SendData(I2C1, I2C1_Buffer2_Tx[Tx_Idx++]);
    /* Test on I2C2 EV2 and clear it */
    while(!I2C_CheckEvent(I2C2, I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF));
    /* Store received data on I2C2 */
    I2C2_Buffer2_Rx[Rx_Idx++] = I2C_ReceiveData(I2C2);
    /* Test on I2C1 EV8 and clear it */
    while(!I2C_CheckEvent(I2C1, I2C_EVENT_MASTER_BYTE_TRANSMITTED)); 
  }

  /* Send I2C1 STOP Condition */
  I2C_GenerateSTOP(I2C1, ENABLE);
  /* Test on I2C2 EV4 and clear it */
  while(!I2C_CheckEvent(I2C2, I2C_EVENT_SLAVE_STOP_DETECTED)); 
  /* Clear I2C2 STOPF flag: read operation to I2C_SR1 followed by a 
     write operation to I2C_CR1 */
  I2C_GetFlagStatus(I2C2, I2C_FLAG_STOPF);
  I2C_Cmd(I2C2, ENABLE); 

  /* Check the corectness of written data */
  TransferStatus2 = Buffercmp(I2C1_Buffer2_Tx, I2C2_Buffer2_Rx, BufferSize);
  /* TransferStatus2 = PASSED, if the transmitted and received data
     are equal */
  /* TransferStatus2 = FAILED, if the transmitted and received data 
     are different */

  while (1)				   
  {
  }
}

/**
  * @brief  Configures the different system clocks.
  * @param  None
  * @retval : None
  */
void RCC_Configuration(void)
{
  /* Setup the microcontroller system. Initialize the Embedded Flash Interface,  
     initialize the PLL and update the SystemFrequency variable. */
  SystemInit();

/* Enable peripheral clocks --------------------------------------------------*/
  /* GPIOB Periph clock enable */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB, ENABLE);
  /* I2C1 and I2C2 Periph clock enable */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_I2C1 | RCC_APB1Periph_I2C2, ENABLE);
}

/**
  * @brief  Configures the different GPIO ports.
  * @param  None
  * @retval : None
  */
void GPIO_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;

  /* Configure I2C1 pins: SCL and SDA ----------------------------------------*/
  GPIO_InitStructure.GPIO_Pin =  GPIO_Pin_6 | GPIO_Pin_7;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_OD;
  GPIO_Init(GPIOB, &GPIO_InitStructure);

  /* Configure I2C2 pins: SCL and SDA ----------------------------------------*/
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10 | GPIO_Pin_11;
  GPIO_Init(GPIOB, &GPIO_InitStructure);
}

/**
  * @brief  Compares two buffers.
  * @param pBuffer1, pBuffer2: buffers to be compared.
  * @param BufferLength: buffer's length
  * @retval : PASSED: pBuffer1 identical to pBuffer2
  *   FAILED: pBuffer1 differs from pBuffer2
  */
TestStatus Buffercmp(uint8_t* pBuffer1, uint8_t* pBuffer2, uint16_t BufferLength)
{
  while(BufferLength--)
  {
    if(*pBuffer1 != *pBuffer2)
    {
      return FAILED;
    }
    
    pBuffer1++;
    pBuffer2++;
  }

  return PASSED;  
}

#ifdef  USE_FULL_ASSERT

/**
  * @brief  Reports the name of the source file and the source line number
  *   where the assert_param error has occurred.
  * @param file: pointer to the source file name
  * @param line: assert_param error line source number
  * @retval : None
  */
void assert_failed(uint8_t* file, uint32_t line)
{ 
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {
  }
}
#endif

/**
  * @}
  */ 

/**
  * @}
  */ 

/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/