main.c

STM32 库文件

/**
  ******************************************************************************
  * @file RTC/Calendar/main.c 
  * @author  MCD Application Team
  * @version  V3.0.0
  * @date  04/06/2009
  * @brief  Main program body
  ******************************************************************************
  * @copy
  *
  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
  *
  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
  */ 

/* Includes ------------------------------------------------------------------*/
#include "stm32f10x.h"
#include "platform_config.h"
#include <stdio.h>

/** @addtogroup StdPeriph_Examples
  * @{
  */

/** @addtogroup RTC_Calendar
  * @{
  */

/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
#define RTCClockOutput_Enable  /* RTC Clock/64 is output on tamper pin(PC.13) */

/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
__IO uint32_t TimeDisplay = 0;

/* Private function prototypes -----------------------------------------------*/
void RCC_Configuration(void);
void GPIO_Configuration(void);
void USART_Configuration(void);
void RTC_Configuration(void);
void NVIC_Configuration(void);
uint32_t Time_Regulate(void);
void Time_Adjust(void);
void Time_Show(void);
void Time_Display(uint32_t TimeVar);
uint8_t USART_Scanf(uint32_t value);

#ifdef __GNUC__
/* With GCC/RAISONANCE, small printf (option LD Linker->Libraries->Small printf
   set to 'Yes') calls __io_putchar() */
#define PUTCHAR_PROTOTYPE int __io_putchar(int ch)
#else
#define PUTCHAR_PROTOTYPE int fputc(int ch, FILE *f)
#endif /* __GNUC__ */

/* Private functions ---------------------------------------------------------*/

/**
  * @brief  Main program.
  * @param  None
  * @retval : None
  */
int main(void)
{
  /* System Clocks Configuration */
  RCC_Configuration();

  /* NVIC configuration */
  NVIC_Configuration();

  /* Configure the GPIOs */
  GPIO_Configuration();

  /* Configure the USART1 */
  USART_Configuration();

  if (BKP_ReadBackupRegister(BKP_DR1) != 0xA5A5)
  {
    /* Backup data register value is not correct or not yet programmed (when
       the first time the program is executed) */

    printf("\r\n\n RTC not yet configured....");

    /* RTC Configuration */
    RTC_Configuration();

    printf("\r\n RTC configured....");

    /* Adjust time by values entred by the user on the hyperterminal */
    Time_Adjust();

    BKP_WriteBackupRegister(BKP_DR1, 0xA5A5);
  }
  else
  {
    /* Check if the Power On Reset flag is set */
    if (RCC_GetFlagStatus(RCC_FLAG_PORRST) != RESET)
    {
      printf("\r\n\n Power On Reset occurred....");
    }
    /* Check if the Pin Reset flag is set */
    else if (RCC_GetFlagStatus(RCC_FLAG_PINRST) != RESET)
    {
      printf("\r\n\n External Reset occurred....");
    }

    printf("\r\n No need to configure RTC....");
    /* Wait for RTC registers synchronization */
    RTC_WaitForSynchro();

    /* Enable the RTC Second */
    RTC_ITConfig(RTC_IT_SEC, ENABLE);
    /* Wait until last write operation on RTC registers has finished */
    RTC_WaitForLastTask();
  }

#ifdef RTCClockOutput_Enable
  /* Enable PWR and BKP clocks */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);

  /* Allow access to BKP Domain */
  PWR_BackupAccessCmd(ENABLE);

  /* Disable the Tamper Pin */
  BKP_TamperPinCmd(DISABLE); /* To output RTCCLK/64 on Tamper pin, the tamper
                                 functionality must be disabled */

  /* Enable RTC Clock Output on Tamper Pin */
  BKP_RTCOutputConfig(BKP_RTCOutputSource_CalibClock);
#endif

  /* Clear reset flags */
  RCC_ClearFlag();

  /* Display time in infinite loop */
  Time_Show();
}

/**
  * @brief  Configures the different system clocks.
  * @param  None
  * @retval : None
  */
void RCC_Configuration(void)
{
  /* Setup the microcontroller system. Initialize the Embedded Flash Interface,
     initialize the PLL and update the SystemFrequency variable. */
  SystemInit();

  /* Enable USART1, GPIOA, GPIOC and GPIO_LED clocks */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA |
                         RCC_APB2Periph_GPIO_LED | RCC_APB2Periph_GPIOC , ENABLE);
}

/**
  * @brief  Configures the nested vectored interrupt controller.
  * @param  None
  * @retval : None
  */
void NVIC_Configuration(void)
{
  NVIC_InitTypeDef NVIC_InitStructure;

  /* Configure one bit for preemption priority */
  NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);

  /* Enable the RTC Interrupt */
  NVIC_InitStructure.NVIC_IRQChannel = RTC_IRQn;
  NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1;
  NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
  NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
  NVIC_Init(&NVIC_InitStructure);
}

/**
  * @brief  Configures the different GPIO ports.
  * @param  None
  * @retval : None
  */
void GPIO_Configuration(void)
{
  GPIO_InitTypeDef GPIO_InitStructure;

  /* Configure GPIO_LED pin 6 as Output push-pull */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_6;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
  GPIO_Init(GPIO_LED, &GPIO_InitStructure);

  /* Configure USART1 Tx (PA.09) as alternate function push-pull */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
  GPIO_Init(GPIOA, &GPIO_InitStructure);

  /* Configure USART1 Rx (PA.10) as input floating */
  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
  GPIO_Init(GPIOA, &GPIO_InitStructure);
}

/**
  * @brief  Configures the RTC.
  * @param  None
  * @retval : None
  */
void RTC_Configuration(void)
{
  /* Enable PWR and BKP clocks */
  RCC_APB1PeriphClockCmd(RCC_APB1Periph_PWR | RCC_APB1Periph_BKP, ENABLE);

  /* Allow access to BKP Domain */
  PWR_BackupAccessCmd(ENABLE);

  /* Reset Backup Domain */
  BKP_DeInit();

  /* Enable LSE */
  RCC_LSEConfig(RCC_LSE_ON);
  /* Wait till LSE is ready */
  while (RCC_GetFlagStatus(RCC_FLAG_LSERDY) == RESET)
  {}

  /* Select LSE as RTC Clock Source */
  RCC_RTCCLKConfig(RCC_RTCCLKSource_LSE);

  /* Enable RTC Clock */
  RCC_RTCCLKCmd(ENABLE);

  /* Wait for RTC registers synchronization */
  RTC_WaitForSynchro();

  /* Wait until last write operation on RTC registers has finished */
  RTC_WaitForLastTask();

  /* Enable the RTC Second */
  RTC_ITConfig(RTC_IT_SEC, ENABLE);

  /* Wait until last write operation on RTC registers has finished */
  RTC_WaitForLastTask();

  /* Set RTC prescaler: set RTC period to 1sec */
  RTC_SetPrescaler(32767); /* RTC period = RTCCLK/RTC_PR = (32.768 KHz)/(32767+1) */

  /* Wait until last write operation on RTC registers has finished */
  RTC_WaitForLastTask();
}

/**
  * @brief  Returns the time entered by user, using Hyperterminal.
  * @param  None
  * @retval : Current time RTC counter value
  */
uint32_t Time_Regulate(void)
{
  uint32_t Tmp_HH = 0xFF, Tmp_MM = 0xFF, Tmp_SS = 0xFF;

  printf("\r\n==============Time Settings=====================================");
  printf("\r\n  Please Set Hours");

  while (Tmp_HH == 0xFF)
  {
    Tmp_HH = USART_Scanf(23);
  }
  printf(":  %d", Tmp_HH);
  printf("\r\n  Please Set Minutes");
  while (Tmp_MM == 0xFF)
  {
    Tmp_MM = USART_Scanf(59);
  }
  printf(":  %d", Tmp_MM);
  printf("\r\n  Please Set Seconds");
  while (Tmp_SS == 0xFF)
  {
    Tmp_SS = USART_Scanf(59);
  }
  printf(":  %d", Tmp_SS);

  /* Return the value to store in RTC counter register */
  return((Tmp_HH*3600 + Tmp_MM*60 + Tmp_SS));
}

/**
  * @brief  Adjusts time.
  * @param  None
  * @retval : None
  */
void Time_Adjust(void)
{
  /* Wait until last write operation on RTC registers has finished */
  RTC_WaitForLastTask();
  /* Change the current time */
  RTC_SetCounter(Time_Regulate());
  /* Wait until last write operation on RTC registers has finished */
  RTC_WaitForLastTask();
}

/**
  * @brief  Displays the current time.
  * @param TimeVar: RTC counter value.
  * @retval : None
  */
void Time_Display(uint32_t TimeVar)
{
  uint32_t THH = 0, TMM = 0, TSS = 0;

  /* Compute  hours */
  THH = TimeVar / 3600;
  /* Compute minutes */
  TMM = (TimeVar % 3600) / 60;
  /* Compute seconds */
  TSS = (TimeVar % 3600) % 60;

  printf("Time: %0.2d:%0.2d:%0.2d\r", THH, TMM, TSS);
}

/**
  * @brief  Shows the current time (HH:MM:SS) on the Hyperterminal.
  * @param  None
  * @retval : None
  */   
void Time_Show(void)
{
  printf("\n\r");

  /* Infinite loop */
  while (1)
  {
    /* If 1s has paased */
    if (TimeDisplay == 1)
    {
      /* Display current time */
      Time_Display(RTC_GetCounter());
      TimeDisplay = 0;
    }
  }
}

/**
  * @brief  Configures the USART1.
  * @param  None
  * @retval : None
  */
void USART_Configuration(void)
{
  USART_InitTypeDef USART_InitStructure;

  /* Enable USARTx clock */
  RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1, ENABLE);

  /* USART1 configuration ----------------------------------------------------*/
  /* USART1 configured as follow:
        - BaudRate = 115200 baud  
        - Word Length = 8 Bits
        - One Stop Bit
        - No parity
        - Receive and transmit enabled
        - Hardware flow control disabled (RTS and CTS signals)  
  */
  USART_InitStructure.USART_BaudRate = 115200;
  USART_InitStructure.USART_WordLength = USART_WordLength_8b;
  USART_InitStructure.USART_StopBits = USART_StopBits_1;
  USART_InitStructure.USART_Parity = USART_Parity_No;
  USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
  USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;

  USART_Init(USART1, &USART_InitStructure);

  /* Enable USART1 */
  USART_Cmd(USART1, ENABLE);
}

/**
  * @brief  Retargets the C library printf function to the USART.
  * @param  None
  * @retval : None
  */
PUTCHAR_PROTOTYPE
{
  /* Place your implementation of fputc here */
  /* e.g. write a character to the USART */
  USART_SendData(USART1, (uint8_t) ch);

  /* Loop until the end of transmission */
  while (USART_GetFlagStatus(USART1, USART_FLAG_TC) == RESET)
  {}

  return ch;
}

/**
  * @brief  Gets numeric values from the hyperterminal.
  * @param  None
  * @retval : None
  */
uint8_t USART_Scanf(uint32_t value)
{
  uint32_t index = 0;
  uint32_t tmp[2] = {0, 0};

  while (index < 2)
  {
    /* Loop until RXNE = 1 */
    while (USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET)
    {}
    tmp[index++] = (USART_ReceiveData(USART1));
    if ((tmp[index - 1] < 0x30) || (tmp[index - 1] > 0x39))
    {
      printf("\n\rPlease enter valid number between 0 and 9");
      index--;
    }
  }
  /* Calculate the Corresponding value */
  index = (tmp[1] - 0x30) + ((tmp[0] - 0x30) * 10);
  /* Checks */
  if (index > value)
  {
    printf("\n\rPlease enter valid number between 0 and %d", value);
    return 0xFF;
  }
  return index;
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *   where the assert_param error has occurred.
  * @param file: pointer to the source file name
  * @param line: assert_param error line source number
  * @retval : None
  */
void assert_failed(uint8_t* file, uint32_t line)
{
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */

  /* Infinite loop */
  while (1)
  {}
}
#endif

/**
  * @}
  */

/**
  * @}
  */

/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/