⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 psock.c

📁 c8051f020_uip1.0.rar
💻 C
字号:
/* * Copyright (c) 2004, Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright *    notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright *    notice, this list of conditions and the following disclaimer in the *    documentation and/or other materials provided with the distribution. * 3. Neither the name of the Institute nor the names of its contributors *    may be used to endorse or promote products derived from this software *    without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED.  IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. * * This file is part of the uIP TCP/IP stack * * Author: Adam Dunkels <adam@sics.se> * * $Id: psock.c,v 1.2 2006/06/12 08:00:30 adam Exp $ */#include <stdio.h>#include <string.h>#include "uipopt.h"#include "psock.h"#include "uip.h"#define STATE_NONE 0#define STATE_ACKED 1#define STATE_READ 2#define STATE_BLOCKED_NEWDATA 3#define STATE_BLOCKED_CLOSE 4#define STATE_BLOCKED_SEND 5#define STATE_DATA_SENT 6/* * Return value of the buffering functions that indicates that a * buffer was not filled by incoming data. * */#define BUF_NOT_FULL 0#define BUF_NOT_FOUND 0/* * Return value of the buffering functions that indicates that a * buffer was completely filled by incoming data. * */#define BUF_FULL 1/* * Return value of the buffering functions that indicates that an * end-marker byte was found. * */#define BUF_FOUND 2/*---------------------------------------------------------------------------*/static voidbuf_setup(struct psock_buf *buf,	  u8_t *bufptr, u16_t bufsize){  buf->ptr = bufptr;  buf->left = bufsize;}/*---------------------------------------------------------------------------*/static u8_tbuf_bufdata(struct psock_buf *buf, u16_t len,	    u8_t **dataptr, u16_t *datalen){  if(*datalen < buf->left) {    memcpy(buf->ptr, *dataptr, *datalen);    buf->ptr += *datalen;    buf->left -= *datalen;    *dataptr += *datalen;    *datalen = 0;    return BUF_NOT_FULL;  } else if(*datalen == buf->left) {    memcpy(buf->ptr, *dataptr, *datalen);    buf->ptr += *datalen;    buf->left = 0;    *dataptr += *datalen;    *datalen = 0;    return BUF_FULL;  } else {    memcpy(buf->ptr, *dataptr, buf->left);    buf->ptr += buf->left;    *datalen -= buf->left;    *dataptr += buf->left;    buf->left = 0;    return BUF_FULL;  }}/*---------------------------------------------------------------------------*/static u8_tbuf_bufto(register struct psock_buf *buf, u8_t endmarker,	  register u8_t **dataptr, register u16_t *datalen){  u8_t c;  while(buf->left > 0 && *datalen > 0) {    c = *buf->ptr = **dataptr;    ++*dataptr;    ++buf->ptr;    --*datalen;    --buf->left;        if(c == endmarker) {      return BUF_FOUND;    }  }  if(*datalen == 0) {    return BUF_NOT_FOUND;  }  while(*datalen > 0) {    c = **dataptr;    --*datalen;    ++*dataptr;        if(c == endmarker) {      return BUF_FOUND | BUF_FULL;    }  }    return BUF_FULL;}/*---------------------------------------------------------------------------*/static charsend_data(register struct psock *s){  if(s->state != STATE_DATA_SENT || uip_rexmit()) {    if(s->sendlen > uip_mss()) {      uip_send(s->sendptr, uip_mss());    } else {      uip_send(s->sendptr, s->sendlen);    }    s->state = STATE_DATA_SENT;    return 1;  }  return 0;}/*---------------------------------------------------------------------------*/static chardata_acked(register struct psock *s){  if(s->state == STATE_DATA_SENT && uip_acked()) {    if(s->sendlen > uip_mss()) {      s->sendlen -= uip_mss();      s->sendptr += uip_mss();    } else {      s->sendptr += s->sendlen;      s->sendlen = 0;    }    s->state = STATE_ACKED;    return 1;  }  return 0;}/*---------------------------------------------------------------------------*/PT_THREAD(psock_send(register struct psock *s, const char *buf,		     unsigned int len)){  PT_BEGIN(&s->psockpt);  /* If there is no data to send, we exit immediately. */  if(len == 0) {    PT_EXIT(&s->psockpt);  }  /* Save the length of and a pointer to the data that is to be     sent. */  s->sendptr = buf;  s->sendlen = len;  s->state = STATE_NONE;  /* We loop here until all data is sent. The s->sendlen variable is     updated by the data_sent() function. */  while(s->sendlen > 0) {    /*     * The condition for this PT_WAIT_UNTIL is a little tricky: the     * protothread will wait here until all data has been acknowledged     * (data_acked() returns true) and until all data has been sent     * (send_data() returns true). The two functions data_acked() and     * send_data() must be called in succession to ensure that all     * data is sent. Therefore the & operator is used instead of the     * && operator, which would cause only the data_acked() function     * to be called when it returns false.     */    PT_WAIT_UNTIL(&s->psockpt, data_acked(s) & send_data(s));  }  s->state = STATE_NONE;    PT_END(&s->psockpt);}/*---------------------------------------------------------------------------*/PT_THREAD(psock_generator_send(register struct psock *s,			       unsigned short (*generate)(void *), void *arg)){  PT_BEGIN(&s->psockpt);  /* Ensure that there is a generator function to call. */  if(generate == NULL) {    PT_EXIT(&s->psockpt);  }  /* Call the generator function to generate the data in the     uip_appdata buffer. */  s->sendlen = generate(arg);  s->sendptr = uip_appdata;  s->state = STATE_NONE;    do {    /* Call the generator function again if we are called to perform a       retransmission. */    if(uip_rexmit()) {      generate(arg);    }    /* Wait until all data is sent and acknowledged. */    PT_WAIT_UNTIL(&s->psockpt, data_acked(s) & send_data(s));  } while(s->sendlen > 0);    s->state = STATE_NONE;    PT_END(&s->psockpt);}/*---------------------------------------------------------------------------*/u16_tpsock_datalen(struct psock *psock){  return psock->bufsize - psock->buf.left;}/*---------------------------------------------------------------------------*/charpsock_newdata(struct psock *s){  if(s->readlen > 0) {    /* There is data in the uip_appdata buffer that has not yet been       read with the PSOCK_READ functions. */    return 1;  } else if(s->state == STATE_READ) {    /* All data in uip_appdata buffer already consumed. */    s->state = STATE_BLOCKED_NEWDATA;    return 0;  } else if(uip_newdata()) {    /* There is new data that has not been consumed. */    return 1;  } else {    /* There is no new data. */    return 0;  }}/*---------------------------------------------------------------------------*/PT_THREAD(psock_readto(register struct psock *psock, unsigned char c)){  PT_BEGIN(&psock->psockpt);  buf_setup(&psock->buf, psock->bufptr, psock->bufsize);    /* XXX: Should add buf_checkmarker() before do{} loop, if     incoming data has been handled while waiting for a write. */  do {    if(psock->readlen == 0) {      PT_WAIT_UNTIL(&psock->psockpt, psock_newdata(psock));      psock->state = STATE_READ;      psock->readptr = (u8_t *)uip_appdata;      psock->readlen = uip_datalen();    }  } while((buf_bufto(&psock->buf, c,		     &psock->readptr,		     &psock->readlen) & BUF_FOUND) == 0);    if(psock_datalen(psock) == 0) {    psock->state = STATE_NONE;    PT_RESTART(&psock->psockpt);  }  PT_END(&psock->psockpt);}/*---------------------------------------------------------------------------*/PT_THREAD(psock_readbuf(register struct psock *psock)){  PT_BEGIN(&psock->psockpt);  buf_setup(&psock->buf, psock->bufptr, psock->bufsize);    /* XXX: Should add buf_checkmarker() before do{} loop, if     incoming data has been handled while waiting for a write. */  do {    if(psock->readlen == 0) {      PT_WAIT_UNTIL(&psock->psockpt, psock_newdata(psock));      printf("Waited for newdata\n");      psock->state = STATE_READ;      psock->readptr = (u8_t *)uip_appdata;      psock->readlen = uip_datalen();    }  } while(buf_bufdata(&psock->buf, psock->bufsize,			 &psock->readptr,			 &psock->readlen) != BUF_FULL);  if(psock_datalen(psock) == 0) {    psock->state = STATE_NONE;    PT_RESTART(&psock->psockpt);  }  PT_END(&psock->psockpt);}/*---------------------------------------------------------------------------*/voidpsock_init(register struct psock *psock, char *buffer, unsigned int buffersize){  psock->state = STATE_NONE;  psock->readlen = 0;  psock->bufptr = buffer;  psock->bufsize = buffersize;  buf_setup(&psock->buf, buffer, buffersize);  PT_INIT(&psock->pt);  PT_INIT(&psock->psockpt);}/*---------------------------------------------------------------------------*/

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -