trf7960.c

读卡程序.rar

#include "main.h"

void STARTcondition(void)
{
	TRFWrite = 0x00;
	clkON;
	TRFWrite = 0xff;
	clkOFF;
}	/* STARTcondition */


void STOPcondition(void)
{
	TRFWrite |= 0x80;	/* stop condition */
	clkON;
	TRFWrite = 0x00;
	clkOFF;
}	


void STOPcont(void)
{	/* stop condition for continous mode */
	TRFWrite = 0x00;
	TRFDirOUT;
	TRFWrite = 0x80;
	__no_operation();
	TRFWrite = 0x00;
}	/* STOPcond */

//---------------initialize TRF796X-----------------------------
void InitialTRF7960(void)
{
	TurnOnRF();
        //add code
        command[0] = 0x0b;
        command[1] = 0xe7;
        WriteSingle(command, 2);
        //end add code
	command[0] = ISOControl;		// set register 0x01 for ISO15693 operation
	command[1] = 0x02;
	WriteSingle(command, 2);
        command[0] = ModulatorControl;
	command[1] = 0x60;
	WriteSingle(command, 2);
}

//---------------write the register of TRF796X------------------
void WriteSingle(unsigned char *pbuf, unsigned char length)
{
          int i;
	  STARTcondition();
	    while(length > 0)
	  {
		*pbuf = (0x1f &*pbuf);	/* register address */

		/* address, write, single */
		for(i = 0; i < 2; i++)
		{
			TRFWrite = *pbuf;	/* send command and data */
			clkON;
			clkOFF;
			pbuf++;
			length--;
		}
	}	/* while */

	STOPcondition();
}

//--------------read the register of TRF796X-------------------
void ReadSingle(unsigned char *pbuf, unsigned char lenght)
{      
	STARTcondition();

	while(lenght > 0)
	{
		*pbuf = (0x40 | *pbuf); /* address, read, single */
		*pbuf = (0x5f &*pbuf);	/* register address */

		TRFWrite = *pbuf;		/* send command */
		clkON;
		clkOFF;

		TRFDirIN;				/* read register */
		clkON;
		__no_operation();
		*pbuf = TRFRead;
		clkOFF;

		TRFWrite = 0x00;
		TRFDirOUT;

		pbuf++;
		lenght--;
	}
		
	STOPcondition();
}		

//--------------read multiple registers-----------------------
void ReadCont(unsigned char *pbuf, unsigned char lenght)
{     
	STARTcondition();

	*pbuf = (0x60 | *pbuf); /* address, read, continous */
	*pbuf = (0x7f &*pbuf);	/* register address */
	TRFWrite = *pbuf;		/* send command */
	clkON;
	clkOFF;
	TRFDirIN;				/* read register */

	while(lenght > 0)
	{
		clkON;
		__no_operation();
		*pbuf = TRFRead;
		clkOFF;
		pbuf++;
		lenght--;
	}						/* while */

	STOPcont();
} 

//-------------send direct command to TRF796X----------------
void DirectCommand(unsigned char *pbuf)
{
	STARTcondition();
	*pbuf = (0x80 | *pbuf); /* command */
	*pbuf = (0x9f &*pbuf);	/* command code */
	TRFWrite = *pbuf;		/* send command */
	clkON;
	clkOFF;
	STOPcondition();
}

//-------------Inventory-----------------------
void InventoryRequest(unsigned char *mask, unsigned char length)
{
	int size = 3;
	int k;
	unsigned char flags = 0x02;
        unsigned char com_buf[8];
    
	com_buf[0] = ModulatorControl;
	//com_buf[1] = 0x31;
        com_buf[1] = 0x31;
	WriteSingle(com_buf, 2);

	com_buf[0] = Command(Reset);
	com_buf[1] = Command(TransmitCRC);						/* send with CRC */
	com_buf[2] = 0x3d;						/* write continous from 1D */
	com_buf[3] = (char) (size >> 8);
	com_buf[4] = (char) (size << 4);
	com_buf[5] = flags;						/* ISO15693 flags */
	com_buf[6] = 0x20;						/* anticollision command code */
	com_buf[7] = 0x01;
        
        
	while(1)
        {
	IrqReset();
	irqCLR;							/* PORT2 interrupt flag clear */
	irqON;
        
	RAWwrite(&com_buf[0],  8);	/* writing to FIFO */ 
	i_reg = 0x01;

	while(i_reg != 0xFF)
	{
		k++;
		if(k == 0xc000)
		{
			i_reg = 0x00;
			RXErrorFlag = 0x00;
			RXTXstate = 0;
                        LED_OFF;              
                        buf[1] = 0x00;
	                command[0] = Reset;			/* FIFO has to be reset before recieving the next response */
	                DirectCommand(command);
			break;
		}
	}

	if(i_reg == 0xff)
	{
           DisableInterrupts;
	   RXTXstate = 0;
	   Put_byte(buf[1] );
           LED_ON;
           EnableInterrupts;          
	}

	command[0] = Reset;			/* FIFO has to be reset before recieving the next response */
	DirectCommand(command);
	irqOFF;
        }
        
}

//-------------write data to TRF796X's FIFO----------------------
void RAWwrite(unsigned char *pbuf, unsigned char lenght)
{
 
        STARTcondition();
	while(lenght > 0)
	{
		TRFWrite = *pbuf;	/* send command */
		clkON;
		clkOFF;
		pbuf++;
		lenght--;
	}						/* while */

	STOPcont();
}

//-------------set TRF7960's mode---------------------------------
void SetTRF(void)
{
	unsigned char command[2];

	command[0] = ModulatorControl;
	command[1] = 0x60;
	WriteSingle(command, 2);
}

//-------------reset the irq register-----------------------------
void IrqReset(void)
{
	command[0] = IRQStatus;
	command[1] = IRQMask;
	ReadCont(command, 2);
}

//-------------turn on RF signal----------------------------------
void TurnOnRF(void)
{
	command[0] = ChipStateControl;	// turn on RF driver
	//command[1] = 0x21;
        command[1] = 0x29;
	WriteSingle(command, 2);
}

//-------------turn off RF signal---------------------------------
void TurnOffRF(void)
{
	command[0] = ChipStateControl;	// turn off RF driver
	command[1] = 0x01;
    WriteSingle(command, 2);
}

//--------------generate the opcode--------------------------------
unsigned char Command(unsigned char command)
{
	unsigned char Opcode;
	Opcode = 0x80 | command;
	Opcode = 0x9f & Opcode;
	return Opcode; 
}