motorola.lib

EWB-v5.1电路仿真设计-11.0M.zip

*******************************************************************************
*                                                                             *
*                                                                             *
*                                                                             *
*        #############################################################        *
*        #                                                           #        *
*        #                       MTD10P06HDL                         #        *
*        #                                                           #        *
*        #                 Motorola TMOS Power FET                   #        *
*        #                       10 AMPERES                          #        *
*        #                        60 VOLTS                           #        *
*        #                   RDS(on) = undef OHMS                    #        *
*        #                     Package = TO220                       #        * 
*        #                                                           #        *
*        #               This model was developed by                 #        *
*        #                      Analogy, Inc.                        #        *
*        #                    9205 SW Gemini Dr.                     #        *
*        #                   Beaverton, OR  97005                    #        *
*        #               Copyright 1994 Analogy, Inc.                #        *
*        #                  All Rights Reserved                      #        *
*        #                                                           #        *
*        #    The content of this model is subject to change         #        *
*        #    without notice and may not be modified or altered      #        *
*        #    without permission from Motorola, Inc.  This model     #        *
*        #    has been carefully checked and is believed to be       #        *
*        #    accurate, however neither Analogy nor Motorola         #        *
*        #    assume liability for the use of this model or the      #        *
*        #    results obtained from using it.                        #        *
*        #                                                           #        *
*        #    For more information regarding modeling services,      #        *
*        #    model libraries or simulation products, please         #        *
*        #    Analogy, Inc. [phone].                          #        *
*        #                                                           #        *
*        #############################################################        *
*                                                                             *
*                                                                             *
*                                                                             *
*******************************************************************************
* There are four simulation models provided on this disk for the MTD10P06HDL 
* power mosfet.  Three of the models are for use with SPICE based simulators 
* and the fourth model is for use with the SABER(TM) simulator from Analogy.
*
* The three SPICE models have identical parameter values and model structure 
* however the syntax is slightly modified in each model to support a variety 
* of SPICE simulators. The SPICE model is based on the available elements 
* in SPICE based electrical simulators and may have limited accuracy and 
* convergence capabilities due to fundamental limitations in SPICE based 
* simulators. Specifically, this model DOES NOT produce an accurate prediction 
* of some non-linear capacitance effects, non-linear leakage characteristics, 
* soft-knee breakdown, weak inversion characteristics, body diode forward and 
* reverse recovery  mechanisms, and maximum device ratings.
*
* The SABER model is a more accurate model that includes all non-linear 
* capacitances, non-linear leakage characteristics, soft-knee breakdown, weak 
* inversion characteristics, body diode forward and reverse recovery mechanisms, 
* and maximum stress ratings. The model is available for use with the SABER(tm) 
* simulator from Analogy and is written in MAST(tm), an Analog Hardware 
* Description Language (AHDL). The SABER model is well suited for power circuit 
* simulation. 
********************************************************************************
*
********************************************************************************
*
* The model for this device is a subcircuit and can be used in the one of the
* following formats in any spice compatible simulator.
*
* This model file contains 3 subcircuits with correct syntax for SPICE2G.6, 
* SPICE3C/D.X, HSPICE(tm) and PSPICE(tm). The user must call the proper subcircuit
* in their netlist depending on the simulator they are using, e.g.:
*
* X<name> Nodes<N1, N2, N3> Model_Name
*
* where X<name> is the circuit specific name, Nodes<N1, N2, N3> are the
* connection points for the device and Model_Name is the name of the model
* provided in this model file.
*
* There are 3 nodes for this device.
* The first is the Drain, the second is the Gate, and the third is the Source.
* The Model_Name is: mtd10p06hdlG for Berkley 2G.6 and compatible simulators.
*                    mtd10p06hdlD for Berkley 3C.X, 3D.X and HSPICE(tm) simulators.
*                    mtd10p06hdlP for Microsim PSPICE(tm) simulator. 
* Example: X1 1 2 3 mtd10p06hdlX
* 
******* BERKLEY 2G.6 AND COMPATIBLE SIMULATORS *****************************
**************************  INSTANTIATION   **********************************
.subckt mtd10p06hdlG  10 20 30 
*
* 10 = Drain 20 = Gate 30 = Source
*
******************************************************************************
*
*------------------------ EXTERNAL PARASITICS --------------------------------
* PACKAGE INDUCTANCE
*
LDRAIN  10  11  4.5e-09
LGATE   20  21  7.5e-09
LSOURCE 30  31  7.5e-09
*
* RESISTANCES
* 
RDRAIN1    4  11 0.08286 TC=0.004099,1.47717e-05
RDRAIN2    4   5 0.001 TC=0.004099,1.47717e-05 
RSOURCE   31   6 0.03374 TC=-0.0001518,3.7026e-06
RDBODY     8  30 0.8  TC=-0.01362,5.70097e-05
*
RGATE      21   2 5
*
*--------------------------------------------------------------------------
*
*--------------- CAPACITANCES AND BODY DIODE ------------------------------
*
DBODY       11  8  DBODY
DGD         11  3  DGD
CGDMAX      2   3 2.5e-09
RGDMAX      2   3 1e+08
CGS         2   6 7.919e-10 
*
*--------------------------------------------------------------------------
*
*----------------------- CORE MOSFET --------------------------------------
*
M1       5  2  6  6  MAIN
*
*--------------------------------------------------------------------------
*
.MODEL MAIN PMOS  ( 
+LEVEL   = 3
+VTO     = -2.239
+KP      = 23.4
+GAMMA   = 0.8
+PHI     = 0.6
+LAMBDA  = 0.001
+RD      = 0
+RS      = 0
+CBD     = 0
+CBS     = 0
+IS      = 1e-14
+PB      = 0.8
+CGSO    = 0
+CGDO    = 0
+CGBO    = 0
+RSH     = 0
+CJ      = 0
+MJ      = 0.5
+CJSW    = 0
+MJSW    = 0.33
+JS      = 1e-14
+TOX     = 1e-07
+NSUB    = 1e+15
+NSS     = 0
+NFS     = 2.982e+11
+TPG     = 1
+XJ      = 0
+LD      = 0
+UO      = 600
+UCRIT   = 0
+UEXP    = 0
+UTRA    = 0
+VMAX    = 0
+NEFF    = 1
+KF      = 0
+AF      = 1
+FC      = 0.5
+DELTA   = 0
+THETA   = 0
+ETA     = 0
+KAPPA   = 0.2)
*
*--------------------------------------------------------------------------
*
.MODEL DGD D  ( 
+IS      = 1e-15
+RS      = 0
+N       = 1000
+TT      = 0
+CJO     = 9.571e-10
+VJ      = 0.1872
+M       = 0.5743
+EG      = 1.11
+XTI     = 3
+KF      = 0
+AF      = 1
+FC      = 0.5
+BV      = 10000
+IBV     = 0.001)
*
*--------------------------------------------------------------------------
*
.MODEL DBODY D  ( 
+IS      = 1.496e-12
+RS      = 0
+N       = 1.041
+TT      = 1.45e-07
+CJO     = 7.513e-10
+VJ      = 0.8471
+M       = 0.4837
+EG      = 1.11
+XTI     = 4
+KF      = 0
+AF      = 1
+FC      = 0.5
+BV      = 77
+IBV     = 0.00025)
.ENDS
***** BERKLEY 3C.X, 3D.X AND HSPICE(tm) SIMULATORS ***************************
**************************  INSTANTIATION   **********************************
.subckt mtd10p06hdlC 10 20 30 
*
* 10 = Drain 20 = Gate 30 = Source
*
******************************************************************************
*
*------------------------ EXTERNAL PARASITICS --------------------------------
* PACKAGE INDUCTANCE
*
LDRAIN  10  11  4.5e-09
LGATE   20  21  7.5e-09
LSOURCE 30  31  7.5e-09
*
* RESISTANCES
*
RDRAIN1    4  11 0.08286 RDRAIN
RDRAIN2    4   5 0.001 RDRAIN
RSOURCE   31   6 0.03374 RSOURCE 
RDBODY     8  30 0.8  RDBODY
*
RGATE      21   2 5
*
*--------------------------------------------------------------------------
*
*--------------- CAPACITANCES AND BODY DIODE ------------------------------
*
DBODY       11  8 DBODY
DGD         11  3 DGD
CGDMAX      2   3 2.5e-09
RGDMAX      2   3 1e+08
CGS         2   6 7.919e-10 
*
*--------------------------------------------------------------------------
*
*----------------------- CORE MOSFET --------------------------------------
*
M1       5  2  6  6  MAIN
*
*--------------------------------------------------------------------------
*
*.MODEL RDRAIN  R  (
*+TC1     = 0.004099
*+TC2     = 1.47717e-05)
*
*.MODEL RSOURCE  R  (
*+TC1     = -0.0001518
*+TC2     = 3.7026e-06)
*
*.MODEL RDBODY  R  (
*+TC1     = -0.01362
*+TC2     = 5.70097e-05)
*
*
.MODEL MAIN PMOS  ( 
+LEVEL   = 3
+VTO     = -2.239
+KP      = 23.4
+GAMMA   = 0.8
+PHI     = 0.6
+LAMBDA  = 0.001
+RD      = 0
+RS      = 0
+CBD     = 0
+CBS     = 0
+IS      = 1e-14
+PB      = 0.8
+CGSO    = 0
+CGDO    = 0
+CGBO    = 0
+RSH     = 0
+CJ      = 0
+MJ      = 0.5
+CJSW    = 0
+MJSW    = 0.33
+JS      = 1e-14
+TOX     = 1e-07
+NSUB    = 1e+15
+NSS     = 0
+NFS     = 2.982e+11
+TPG     = 1
+XJ      = 0
+LD      = 0
+UO      = 600
+UCRIT   = 0
+UEXP    = 0
+UTRA    = 0
+VMAX    = 0
+NEFF    = 1
+KF      = 0
+AF      = 1
+FC      = 0.5
+DELTA   = 0
+THETA   = 0
+ETA     = 0
+KAPPA   = 0.2)
*
*--------------------------------------------------------------------------
*
.MODEL DGD D  ( 
+IS      = 1e-15
+RS      = 0
+N       = 1000
+TT      = 0
+CJO     = 9.571e-10
+VJ      = 0.1872
+M       = 0.5743
+EG      = 1.11
+XTI     = 3
+KF      = 0
+AF      = 1
+FC      = 0.5
+BV      = 10000
+IBV     = 0.001)
*
*--------------------------------------------------------------------------
*
.MODEL DBODY D  ( 
+IS      = 1.496e-12
+RS      = 0
+N       = 1.041
+TT      = 1.45e-07
+CJO     = 7.513e-10
+VJ      = 0.8471
+M       = 0.4837
+EG      = 1.11
+XTI     = 4
+KF      = 0
+AF      = 1
+FC      = 0.5
+BV      = 77
+IBV     = 0.00025)
.ENDS
***** MICROSIM PSPICE(tm) SIMULATORS *****************************************
**************************  INSTANTIATION   **********************************
.subckt mtd10p06hdlP 10 20 30 
*
* 10 = Drain 20 = Gate 30 = Source
*
******************************************************************************
*
*------------------------ EXTERNAL PARASITICS --------------------------------
* PACKAGE INDUCTANCE
*
LDRAIN  10  11  4.5e-09
LGATE   20  21  7.5e-09
LSOURCE 30  31  7.5e-09
*
* RESISTANCES
*
RDRAIN1    4  11 RDRAIN 0.08286
RDRAIN2    4   5 RDRAIN 0.001
RSOURCE   31   6 RSOURCE 0.03374  
RDBODY     8  30 RDBODY  0.8
*
RGATE      21   2 5
*
*--------------------------------------------------------------------------
*
*--------------- CAPACITANCES AND BODY DIODE ------------------------------
*
DBODY       11  8 DBODY
DGD         11  3 DGD
CGDMAX      2   3 2.5e-09
RGDMAX      2   3 1e+08
CGS         2   6 7.919e-10 
*
*--------------------------------------------------------------------------
*
*----------------------- CORE MOSFET --------------------------------------
*
M1       5  2  6  6  MAIN
*
*--------------------------------------------------------------------------
*
.MODEL RDRAIN RES  (
+TC1    = 0.004099
+TC2    = 1.47717e-05)
*
.MODEL RSOURCE RES  (
+TC1    = -0.0001518
+TC2    = 3.7026e-06)
*
.MODEL RDBODY RES  (
+TC1    = -0.01362
+TC2    = 5.70097e-05)
*
*
.MODEL MAIN PMOS  ( 
+LEVEL   = 3
+VTO     = -2.239
+KP      = 23.4
+GAMMA   = 0.8
+PHI     = 0.6
+LAMBDA  = 0.001
+RD      = 0
+RS      = 0
+CBD     = 0
+CBS     = 0
+IS      = 1e-14
+PB      = 0.8
+CGSO    = 0
+CGDO    = 0
+CGBO    = 0
+RSH     = 0
+CJ      = 0
+MJ      = 0.5