📄 dunmacro.lib
字号:
*-----------------------------------------------------------------------
* Filename: 6146.inc 13/8/97
* Simulator: PSpice
* Device type: RF beam tetrode
* Device model: 6146
*
* Author: Duncan Munro
* Date: 13/8/97
* Copyright: (C)1997-2000 Duncan Amplification
*
* The following parameters are not modelled:
*
* (1) Heater
*
* Please note that this model is provided "as is" and
* no warranty is provided in respect of its suitability
* for any application.
*
* This model is provided for educational and non-profit use.
*
* Email queries to postmaster@duncanamps.com
*
* Pins A Anode
* S Screen
* G Grid
* K Cathode
*
*-----------------------------------------------------------------------
.SUBCKT 6146 A S G K
*
* Calculate contribution to cathode current
*
Eat at 0 VALUE={0.636*ATAN(V(A,K)/10)}
Eme me 0 VALUE={LIMIT(V(A,K),0,10000)/130}
Emu mu 0 VALUE={PWRS(V(G,K),1-(LIMIT(-V(G,K),30,9999)-30)/2000)}
Egs gs 0 VALUE={LIMIT(V(A,K)/10+V(S,K)*4.5+V(mu)*19,0,1E6)}
Egs2 gs2 0 VALUE={PWRS(V(gs),1.5)*16E-6}
Ecath cc 0 VALUE={LIMIT(V(gs2)*V(at),0,V(me))}
Esd sd 0 VALUE={LIMIT(V(gs2)*V(at)-V(me),0,99999)}
*
* Calculate anode current
*
Ga A K VALUE={V(cc)}
*
* Calculate screen current
*
Escrn sc 0 VALUE={2.5E-4*PWRS(V(S,K),1.5)*V(gs2)*(1.1-V(at))+V(sd)}
Gs S K VALUE={V(sc)}
*
* Grid current
*
Gg G K VALUE={PWR(LIMIT(V(G,K)+1,0,1E6),1.5)*(1.25-V(at))*870E-6}
*
* Capacitances
*
Cg1 G K 13.0p
Cak A K 8.5p
Cg1a G A 0.24p
.ENDS
*-----------------------------------------------------------------------
* Filename: 6BM8P.inc 03/03/99 V1
* Simulator: PSpice
* Device type: Power pentode
* Device model: 6BM8/ECL82
*
* Author: Duncan Munro
* Date: 3/3/99
* Copyright: (C)1999-2000 Duncan Amplification
*
*
* The following parameters are not modelled:
*
* (1) Heater
* (2) Grid current
*
* Please note that this model is provided "as is" and
* no warranty is provided in respect of its suitability
* for any application.
*
* This model is provided for educational and non-profit use.
*
* Email queries to postmaster@duncanamps.com
*
* Pins A Anode
* S Screen
* G Grid
* K Cathode
*
*-----------------------------------------------------------------------
.SUBCKT 6BM8P A S G K
*
* Calculate contribution to cathode current
*
Eat at 0 VALUE={0.636*ATAN(V(A,K)/15)}
Egs gs 0 VALUE={LIMIT(V(S,K)/7+V(G,K)*1.3+V(A,K)/700,0,1E6)}
Egs2 gs2 0 VALUE={PWRS(V(gs),1.24)}
Ecath cc 0 VALUE={V(gs2)*V(at)}
*
* Calculate anode current
*
Ga A K VALUE={3.45E-3*V(cc)}
*
* Calculate screen current
*
Escrn sc 0 VALUE={V(gs2)*(1.1-V(at))}
Gs S K VALUE={3.7E-3*V(sc)*LIMIT(V(S,K),0,10)/10}
*
* Capacitances
*
Cg1 G K 9.6p
Cak A K 9.3p
Cg1a G A 0.35p
.ENDS
*-----------------------------------------------------------------------
* Filename: 6BQ5.inc 12/10/97 V3
* Simulator: PSpice
* Device type: Power pentode
* Device model: 6BQ5/EL84
*
* Author: Duncan Munro
* Date: 12/5/97
* Copyright: (C)1997-2000 Duncan Amplification
*
*
* V3 [12/10/97]: Screen current limited to prevent screen current
* draw at Vs = 0.
*
* The following parameters are not modelled:
*
* (1) Heater
* (2) Grid current is an approximation
*
* Please note that this model is provided "as is" and
* no warranty is provided in respect of its suitability
* for any application.
*
* This model is provided for educational and non-profit use.
*
* Email queries to postmaster@duncanamps.com
*
* Pins A Anode
* S Screen
* G Grid
* K Cathode
*
*-----------------------------------------------------------------------
.SUBCKT 6BQ5 A S G K
*
* Calculate contribution to cathode current
*
Eat at 0 VALUE={0.636*ATAN(V(A,K)/15)}
Egs gs 0 VALUE={LIMIT(V(S,K)/19+V(G,K)+V(A,K)/1400,0,1E6)}
Egs2 gs2 0 VALUE={PWRS(V(gs),1.5)}
Ecath cc 0 VALUE={V(gs2)*V(at)}
*
* Calculate anode current
*
Ga A K VALUE={3.2E-3*V(cc)}
*
* Calculate screen current
*
Escrn sc 0 VALUE={V(gs2)*(1.1-V(at))}
Gs S K VALUE={2.0E-3*V(sc)*LIMIT(V(S,K),0,10)/10}
*
* Grid current (approximation - does not model low va/vs)
*
Gg G K VALUE={PWR(LIMIT(V(G,K)+1,0,1E6),1.5)*50E-6}
*
* Capacitances
*
Cg1 G K 10.8p
Cak A K 6.5p
Cg1a G A 0.5p
.ENDS
*-----------------------------------------------------------------------
* Filename: 6CA7.inc V2 12/10/97
* Simulator: PSpice
* Device type: Power pentode
* Device model: 6CA7/EL34
*
* Author: Duncan Munro
* Date: 2/5/97
* Copyright: (C)1997-2000 Duncan Amplification
*
*
* V2 [12/10/97]: Screen current limited to prevent screen current
* draw at Vs = 0.
*
* The following parameters are not modelled:
*
* (1) Heater
* (2) Grid current is an approximation
*
* Please note that this model is provided "as is" and
* no warranty is provided in respect of its suitability
* for any application.
*
* This model is provided for educational and non-profit use.
*
* Email queries to postmaster@duncanamps.com
*
* Pins A Anode
* S Screen
* G Grid
* K Cathode
*
*-----------------------------------------------------------------------
.SUBCKT 6CA7 A S G K
*
* Calculate contribution to cathode current
*
Eat at 0 VALUE={0.636*ATAN(V(A,K)/23)}
Egs gs 0 VALUE={LIMIT(V(S,K)/9.3+V(G,K)*0.95,0,1E6)}
Egs2 gs2 0 VALUE={PWRS(V(gs),1.5)}
Ecath cc 0 VALUE={V(gs2)*V(at)}
*
* Calculate anode current
*
Ga A K VALUE={1.86E-3*V(cc)}
*
* Calculate screen current
*
Escrn sc 0 VALUE={V(gs2)*(1.1-V(at))}
Gs S K VALUE={1.518E-3*V(sc)*LIMIT(V(S,K),0,10)/10}
*
* Grid current (approximation - does not model low va/vs)
*
Gg G K VALUE={PWR(LIMIT(V(G,K)+1,0,1E6),1.5)*50E-6}
*
* Capacitances
*
Cg1 G K 15.4p
Cak A K 8.4p
Cg1a G A 1.1p
.ENDS
*-----------------------------------------------------------------------
* Filename: 6KG6.inc V2 12/10/97
* Simulator: PSpice
* Device type: Power pentode
* Device model: 6KG6/EL509
* (also 40KG6/PL509 as no heater model)
*
* Author: Duncan Munro
* Date: 21/7/97
* Copyright: (C)1997-2000 Duncan Amplification
*
*
* V2 [12/10/97]: Screen current limited to prevent screen current
* draw at Vs = 0.
*
* The following parameters are not modelled:
*
* (1) Heater
* (2) Grid current is an approximation in the absence
* of suitable data
*
* Also see comments below, as the Svetlana EL509 is of different
* construction and has different capacitances.
*
* Please note that this model is provided "as is" and
* no warranty is provided in respect of its suitability
* for any application.
*
* This model is provided for educational and non-profit use.
*
* Email queries to postmaster@duncanamps.com
*
* Pins A Anode
* S Screen
* G Grid
* K Cathode
*
*-----------------------------------------------------------------------
.SUBCKT 6KG6 A S G K
*
* Calculate contribution to cathode current
*
Eat at 0 VALUE={0.636*ATAN(V(A,K)/20)}
Eme me 0 VALUE={PWR(LIMIT(V(A,K),0,10000),1.5)/17}
Emu mu 0 VALUE={PWRS(V(G,K),1-(LIMIT(-V(G,K),5,9999)-5)/1150)}
Egs gs 0 VALUE={LIMIT(V(S,K)/19+V(mu)/4.3+V(A,K)/800,0,1E6)}
Egs2 gs2 0 VALUE={PWRS(V(gs),1.5)}
Ecath cc 0 VALUE={LIMIT(V(gs2)*V(at),0,V(me))}
Elim el 0 VALUE={LIMIT(V(gs2)*V(at)-V(cc),0,99999)}
*
* Calculate anode current
*
Ga A K VALUE={6E-2*V(cc)}
*
* Calculate screen current
*
Escrn sc 0 VALUE={V(gs2)*(1.1-V(at))+1.2*V(el)}
Gs S K VALUE={1.2E-2*V(sc)*LIMIT(V(S,K),0,10)/10}
*
* Grid current (approximation - does not model low va/vs)
*
Gg G K VALUE={PWR(LIMIT(V(G,K)+1,0,1E6),1.5)*50E-6}
*
* Capacitances
* NOTE: Change Cg1 from 37p to 25p for Svetlana EL509
*
Cg1 G K 37p
Cak A K 18.5p
Cg1a G A 2.5p
.ENDS
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -