b04.c

单片机实验程序-13种-17.4M-pdf.zip

// 	“模仿式”	实验四  V/F压频转换实验
//不对
#include <reg51.h>
#include <absacc.h>
#define LEDLen 6
#define mode 0x03
#define uchar unsigned char
xdata unsigned char OUTBIT _at_ 0xe101;   // 位控制口
xdata unsigned char CLK164 _at_ 0xe102;   // 段控制口(接164时钟位)
xdata unsigned char DAT164 _at_ 0xe102;   // 段控制口(接164数据位)
xdata unsigned char IN     _at_ 0xe103;   // 键盘读入口
xdata unsigned char CAddr _at_  0xe100;

unsigned char LEDBuf[LEDLen];  // 显示缓冲
code unsigned char LEDMAP[] = {  // 八段管显示码
  0x3f, 0x06, 0x5b, 0x4f, 0x66, 0x6d, 0x7d, 0x07,
  0x7f, 0x6f, 0x77, 0x7c, 0x39, 0x5e, 0x79, 0x71
};
uchar count=0;

void timer0() interrupt 1 using 1
{ long int hz;
   uchar j;

      count++;
        if(count==20)
          {
           hz=TH1*256+TL1;
           TH1=0;
           TL1=0;
           for(j=0;j<6;j++)
           {
            LEDBuf[5-j]=LEDMAP[hz%10];
            hz=hz/10;
           }
           count=0;
          }
   TL0=-(50000%256);
   TH0=-(50200/256);
}
void Delay(unsigned char CNT)
{
  unsigned char i;

  while (CNT-- !=0)
    for (i=100; i !=0; i--);
}

void DisplayLED()
{
  unsigned char i, j;
  unsigned char Pos;
  unsigned char LED;

  Pos = 0x20;  // 从左边开始显示
  for (i = 0; i < LEDLen; i++) {
    OUTBIT = 0;     // 关所有八段管
    LED = LEDBuf[i];
    for (j = 0; j < 8; j++) {   // 送164
      if (LED & 0x80) DAT164 = 1; else DAT164 = 0;
      CLK164 = CLK164|0x02;
      CLK164 = CLK164&0xfd;
      LED <<= 1;
    }
    OUTBIT = Pos;  // 显示一位八段管
    Delay(1);
    Pos >>= 1;     // 显示下一位
  }
  OUTBIT = 0;     // 关所有八段管
}

void main()
{


     CAddr = mode;
     TMOD = 0X51;
     TL0=-(49000%256);
     TH0=-(50200/256);
     TR0 = 1;
     TR1=1;
     ET0=1;
     EA=1;
     while(1)
       DisplayLED();   // 延时

}