motorola.lib

通信原理-高频电子电路CAI-340页-22.2M-ppt版.zip

*        #                        12 AMPERES                         #        *
*        #                         60 VOLTS                          #        *
*        #                    RDS(on) = .15 OHMS                     #        *
*        #                     Package = TO220                       #        * 
*        #                                                           #        *
*        #               This model was developed by                 #        *
*        #                      Analogy, Inc.                        #        *
*        #                    9205 SW Gemini Dr.                     #        *
*        #                   Beaverton, OR  97005                    #        *
*        #               Copyright 1994 Analogy, Inc.                #        *
*        #                  All Rights Reserved                      #        *
*        #                                                           #        *
*        #    The content of this model is subject to change         #        *
*        #    without notice and may not be modified or altered      #        *
*        #    without permission from Motorola, Inc.  This model     #        *
*        #    has been carefully checked and is believed to be       #        *
*        #    accurate, however neither Analogy nor Motorola         #        *
*        #    assume liability for the use of this model or the      #        *
*        #    results obtained from using it.                        #        *
*        #                                                           #        *
*        #    For more information regarding modeling services,      #        *
*        #    model libraries or simulation products, please         #        *
*        #    Analogy, Inc. [phone].                          #        *
*        #                                                           #        *
*        #############################################################        *
*                                                                             *
*                                                                             *
*                                                                             *
*******************************************************************************
* There are four simulation models provided on this disk for the MTD3055V 
* power mosfet.  Three of the models are for use with SPICE based simulators 
* and the fourth model is for use with the SABER(TM) simulator from Analogy.
*
* The three SPICE models have identical parameter values and model structure 
* however the syntax is slightly modified in each model to support a variety 
* of SPICE simulators. The SPICE model is based on the available elements 
* in SPICE based electrical simulators and may have limited accuracy and 
* convergence capabilities due to fundamental limitations in SPICE based 
* simulators. Specifically, this model DOES NOT produce an accurate prediction 
* of some non-linear capacitance effects, non-linear leakage characteristics, 
* soft-knee breakdown, weak inversion characteristics, body diode forward and 
* reverse recovery  mechanisms, and maximum device ratings.
*
* The SABER model is a more accurate model that includes all non-linear 
* capacitances, non-linear leakage characteristics, soft-knee breakdown, weak 
* inversion characteristics, body diode forward and reverse recovery mechanisms, 
* and maximum stress ratings. The model is available for use with the SABER(tm) 
* simulator from Analogy and is written in MAST(tm), an Analog Hardware 
* Description Language (AHDL). The SABER model is well suited for power circuit 
* simulation. 
********************************************************************************
*
********************************************************************************
*
* The model for this device is a subcircuit and can be used in the one of the
* following formats in any spice compatible simulator.
*
* This model file contains 3 subcircuits with correct syntax for SPICE2G.6, 
* SPICE3C/D.X, HSPICE(tm) and PSPICE(tm). The user must call the proper subcircuit
* in their netlist depending on the simulator they are using, e.g.:
*
* X<name> Nodes<N1, N2, N3> Model_Name
*
* where X<name> is the circuit specific name, Nodes<N1, N2, N3> are the
* connection points for the device and Model_Name is the name of the model
* provided in this model file.
*
* There are 3 nodes for this device.
* The first is the Drain, the second is the Gate, and the third is the Source.
* The Model_Name is: mtd3055vG for Berkley 2G.6 and compatible simulators.
*                    mtd3055vD for Berkley 3C.X, 3D.X and HSPICE(tm) simulators.
*                    mtd3055vP for Microsim PSPICE(tm) simulator. 
* Example: X1 1 2 3 mtd3055vX
* 
******* BERKLEY 2G.6 AND COMPATIBLE SIMULATORS *****************************
**************************  INSTANTIATION   **********************************
.subckt mtd3055vG  10 20 30 
*
* 10 = Drain 20 = Gate 30 = Source
*
******************************************************************************
*
*------------------------ EXTERNAL PARASITICS --------------------------------
* PACKAGE INDUCTANCE
*
LDRAIN  10  11  4.5e-09
LGATE   20  21  7.5e-09
LSOURCE 30  31  7.5e-09
*
* RESISTANCES
* 
RDRAIN1    4  11 0.05751 TC=0.01579,4.41418e-05
RDRAIN2    4   5 1e-06 TC=0.01579,4.41418e-05 
RSOURCE   31   6 0.038 TC=-0.006098,-7.82742e-06
RDBODY     8  30 0.0166  TC=0.001077,-1.19455e-06
*
RGATE      21   2 5
*
*--------------------------------------------------------------------------
*
*--------------- CAPACITANCES AND BODY DIODE ------------------------------
*
DBODY       8  11 DBODY
DGD         3  11 DGD
CGDMAX      2   3 9e-10
RGDMAX      2   3 1e+08
CGS         2   6 3.824e-10 
*
*--------------------------------------------------------------------------
*
*----------------------- CORE MOSFET --------------------------------------
*
M1       5  2  6  6  MAIN
*
*--------------------------------------------------------------------------
*
.MODEL MAIN NMOS  ( 
+LEVEL   = 3
+VTO     = 3.387
+KP      = 4.42
+GAMMA   = 2
+PHI     = 0.6
+LAMBDA  = 0.001
+RD      = 0
+RS      = 0
+CBD     = 0
+CBS     = 0
+IS      = 1e-14
+PB      = 0.8
+CGSO    = 0
+CGDO    = 0
+CGBO    = 0
+RSH     = 0
+CJ      = 0
+MJ      = 0.5
+CJSW    = 0
+MJSW    = 0.33
+JS      = 1e-14
+TOX     = 1e-07
+NSUB    = 1e+15
+NSS     = 0
+NFS     = 3.5e+11
+TPG     = 1
+XJ      = 0
+LD      = 0
+UO      = 600
+UCRIT   = 10000
+UEXP    = 0
+UTRA    = 0
+VMAX    = 0
+NEFF    = 1
+KF      = 0
+AF      = 1
+FC      = 0.5
+DELTA   = 0
+THETA   = 0
+ETA     = 0
+KAPPA   = 0.2)
*
*--------------------------------------------------------------------------
*
.MODEL DGD D  ( 
+IS      = 1e-15
+RS      = 0
+N       = 1000
+TT      = 0
+CJO     = 3.902e-10
+VJ      = 0.1831
+M       = 0.6195
+EG      = 1.11
+XTI     = 3
+KF      = 0
+AF      = 1
+FC      = 0.5
+BV      = 10000
+IBV     = 0.001)
*
*--------------------------------------------------------------------------
*
.MODEL DBODY D  ( 
+IS      = 2.913e-13
+RS      = 0
+N       = 1.014
+TT      = 5e-08
+CJO     = 4.47e-10
+VJ      = 0.7897
+M       = 0.4506
+EG      = 1.11
+XTI     = 4
+KF      = 0
+AF      = 1
+FC      = 0.5
+BV      = 77.89
+IBV     = 0.00025)
.ENDS
***** BERKLEY 3C.X, 3D.X AND HSPICE(tm) SIMULATORS ***************************
**************************  INSTANTIATION   **********************************
.subckt mtd3055vC 10 20 30 
*
* 10 = Drain 20 = Gate 30 = Source
*
******************************************************************************
*
*------------------------ EXTERNAL PARASITICS --------------------------------
* PACKAGE INDUCTANCE
*
LDRAIN  10  11  4.5e-09
LGATE   20  21  7.5e-09
LSOURCE 30  31  7.5e-09
*
* RESISTANCES
*
RDRAIN1    4  11 0.05751 RDRAIN
RDRAIN2    4   5 1e-06 RDRAIN
RSOURCE   31   6 0.038 RSOURCE 
RDBODY     8  30 0.0166  RDBODY
*
RGATE      21   2 5
*
*--------------------------------------------------------------------------
*
*--------------- CAPACITANCES AND BODY DIODE ------------------------------
*
DBODY       8  11 DBODY
DGD         3  11 DGD
CGDMAX      2   3 9e-10
RGDMAX      2   3 1e+08
CGS         2   6 3.824e-10 
*
*--------------------------------------------------------------------------
*
*----------------------- CORE MOSFET --------------------------------------
*
M1       5  2  6  6  MAIN
*
*--------------------------------------------------------------------------
*
*.MODEL RDRAIN  R  (
*+TC1     = 0.01579
*+TC2     = 4.41418e-05)
*
*.MODEL RSOURCE  R  (
*+TC1     = -0.006098
*+TC2     = -7.82742e-06)
*
*.MODEL RDBODY  R  (
*+TC1     = 0.001077
*+TC2     = -1.19455e-06)
*
*
.MODEL MAIN NMOS  ( 
+LEVEL   = 3
+VTO     = 3.387
+KP      = 4.42
+GAMMA   = 2
+PHI     = 0.6
+LAMBDA  = 0.001
+RD      = 0
+RS      = 0
+CBD     = 0
+CBS     = 0
+IS      = 1e-14
+PB      = 0.8
+CGSO    = 0
+CGDO    = 0
+CGBO    = 0
+RSH     = 0
+CJ      = 0
+MJ      = 0.5
+CJSW    = 0
+MJSW    = 0.33
+JS      = 1e-14
+TOX     = 1e-07
+NSUB    = 1e+15
+NSS     = 0
+NFS     = 3.5e+11
+TPG     = 1
+XJ      = 0
+LD      = 0
+UO      = 600
+UCRIT   = 10000
+UEXP    = 0
+UTRA    = 0
+VMAX    = 0
+NEFF    = 1
+KF      = 0
+AF      = 1
+FC      = 0.5
+DELTA   = 0
+THETA   = 0
+ETA     = 0
+KAPPA   = 0.2)
*
*--------------------------------------------------------------------------
*
.MODEL DGD D  ( 
+IS      = 1e-15
+RS      = 0
+N       = 1000
+TT      = 0
+CJO     = 3.902e-10
+VJ      = 0.1831
+M       = 0.6195
+EG      = 1.11
+XTI     = 3
+KF      = 0
+AF      = 1
+FC      = 0.5
+BV      = 10000
+IBV     = 0.001)
*
*--------------------------------------------------------------------------
*
.MODEL DBODY D  ( 
+IS      = 2.913e-13
+RS      = 0
+N       = 1.014
+TT      = 5e-08
+CJO     = 4.47e-10
+VJ      = 0.7897
+M       = 0.4506
+EG      = 1.11
+XTI     = 4
+KF      = 0
+AF      = 1
+FC      = 0.5
+BV      = 77.89
+IBV     = 0.00025)
.ENDS
***** MICROSIM PSPICE(tm) SIMULATORS *****************************************
**************************  INSTANTIATION   **********************************
.subckt mtd3055vP 10 20 30 
*
* 10 = Drain 20 = Gate 30 = Source
*
******************************************************************************
*
*------------------------ EXTERNAL PARASITICS --------------------------------
* PACKAGE INDUCTANCE
*
LDRAIN  10  11  4.5e-09
LGATE   20  21  7.5e-09
LSOURCE 30  31  7.5e-09
*
* RESISTANCES
*
RDRAIN1    4  11 RDRAIN 0.05751
RDRAIN2    4   5 RDRAIN 1e-06
RSOURCE   31   6 RSOURCE 0.038  
RDBODY     8  30 RDBODY  0.0166
*
RGATE      21   2 5
*
*--------------------------------------------------------------------------
*
*--------------- CAPACITANCES AND BODY DIODE ------------------------------
*
DBODY       8  11 DBODY
DGD         3  11 DGD
CGDMAX      2   3 9e-10
RGDMAX      2   3 1e+08
CGS         2   6 3.824e-10 
*
*--------------------------------------------------------------------------
*
*----------------------- CORE MOSFET --------------------------------------
*
M1       5  2  6  6  MAIN
*
*--------------------------------------------------------------------------
*
.MODEL RDRAIN RES  (
+TC1    = 0.01579
+TC2    = 4.41418e-05)
*
.MODEL RSOURCE RES  (
+TC1    = -0.006098
+TC2    = -7.82742e-06)
*
.MODEL RDBODY RES  (
+TC1    = 0.001077
+TC2    = -1.19455e-06)
*
*
.MODEL MAIN NMOS  ( 
+LEVEL   = 3
+VTO     = 3.387
+KP      = 4.42
+GAMMA   = 2
+PHI     = 0.6
+LAMBDA  = 0.001
+RD      = 0
+RS      = 0
+CB