2313def.inc

USB技术大全-54.8M.zip

;***************************************************************************
;* A P P L I C A T I O N   N O T E   F O R   T H E   A V R   F A M I L Y
;* 
;* Number		:AVR000
;* File Name		:"2313def.inc"
;* Title		:Register/Bit Definitions for the AT90S2313
;* Date	 		:99.01.28
;* Version		:1.30
;* Support telephone	:[phone] (ATMEL Norway)
;* Support fax		:[phone] (ATMEL Norway)
;* Support E-Mail	:[e-mail]
;* Target MCU		:AT90S2313
;*
;* DESCRIPTION
;* When including this file in the assembly program file, all I/O register
;* names and I/O register bit names appearing in the data book can be used.
;* 
;* The Register names are represented by their hexadecimal addresses.
;* 
;* The Register Bit names are represented by their bit number (0-7).
;* 
;* Please observe the difference in using the bit names with instructions
;* such as "sbr"/"cbr" (set/clear bit in register) and "sbrs"/"sbrc" 
;* (skip if bit in register set/cleared). The following example illustrates
;* this:
;* 
;* in	r16,PORTB		;read PORTB latch
;* sbr	r16,(1<<PB6)+(1<<PB5)	;set PB6 and PB5 (use masks, not bit#)
;* out  PORTB,r16		;output to PORTB
;*
;* in	r16,TIFR		;read the Timer Interrupt Flag Register
;* sbrc	r16,TOV0		;test the overflow flag (use bit#)
;* rjmp	TOV0_is_set		;jump if set
;* ...				;otherwise do something else
;***************************************************************************

;***** Specify Device
.device AT90S2313

;***** I/O Register Definitions
.equ	SREG	=$3f
.equ	SPL	=$3d
.equ	GIMSK	=$3b
.equ	GIFR	=$3a
.equ	TIMSK	=$39
.equ	TIFR	=$38
.equ	MCUCR	=$35
.equ	TCCR0	=$33
.equ	TCNT0	=$32
.equ	TCCR1A	=$2f
.equ	TCCR1B	=$2e
.equ	TCNT1H	=$2d
.equ	TCNT1L	=$2c
.equ	OCR1AH	=$2b
.equ	OCR1AL	=$2a
.equ	ICR1H	=$25
.equ	ICR1L	=$24
.equ	WDTCR	=$21
.equ	EEAR	=$1e
.equ	EEARL	=$1e
.equ	EEDR	=$1d
.equ	EECR	=$1c
.equ	PORTB	=$18
.equ	DDRB	=$17
.equ	PINB	=$16
.equ	PORTD	=$12
.equ	DDRD	=$11
.equ	PIND	=$10
.equ	UDR	=$0c
.equ	USR	=$0b
.equ	UCR	=$0a
.equ	UBRR	=$09
.equ	ACSR	=$08


;***** Bit Definitions
.equ	SP7	=7
.equ	SP6	=6
.equ	SP5	=5
.equ	SP4	=4
.equ	SP3	=3
.equ	SP2	=2
.equ	SP1	=1
.equ	SP0	=0

.equ	INT1	=7
.equ	INT0	=6

.equ	INTF1	=7
.equ	INTF0	=6

.equ	TOIE1	=7
.equ	OCIE1A	=6
.equ	TICIE	=3
.equ	TOIE0	=1

.equ	TOV1	=7
.equ	OCF1A	=6
.equ	ICF1	=3
.equ	TOV0	=1

.equ	SE	=5
.equ	SM	=4
.equ	ISC11	=3
.equ	ISC10	=2
.equ	ISC01	=1
.equ	ISC00	=0

.equ	CS02	=2
.equ	CS01	=1
.equ	CS00	=0

.equ	COM1A1	=7
.equ	COM1A0	=6
.equ	PWM11	=1
.equ	PWM10	=0

.equ	ICNC1	=7
.equ	ICES1	=6
.equ	CTC1	=3
.equ	CS12	=2
.equ	CS11	=1
.equ	CS10	=0

.equ	WDTOE	=4
.equ	WDE	=3
.equ	WDP2	=2
.equ	WDP1	=1
.equ	WDP0	=0

.equ	EEMWE	=2
.equ	EEWE	=1
.equ	EERE	=0

.equ	PB7	=7
.equ	PB6	=6
.equ	PB5	=5
.equ	PB4	=4
.equ	PB3	=3
.equ	PB2	=2
.equ	PB1	=1
.equ	PB0	=0

.equ	DDB7	=7
.equ	DDB6	=6
.equ	DDB5	=5
.equ	DDB4	=4
.equ	DDB3	=3
.equ	DDB2	=2
.equ	DDB1	=1
.equ	DDB0	=0

.equ	PINB7	=7
.equ	PINB6	=6
.equ	PINB5	=5
.equ	PINB4	=4
.equ	PINB3	=3
.equ	PINB2	=2
.equ	PINB1	=1
.equ	PINB0	=0

.equ	PD6	=6
.equ	PD5	=5
.equ	PD4	=4
.equ	PD3	=3
.equ	PD2	=2
.equ	PD1	=1
.equ	PD0	=0

.equ	DDD6	=6
.equ	DDD5	=5
.equ	DDD4	=4
.equ	DDD3	=3
.equ	DDD2	=2
.equ	DDD1	=1
.equ	DDD0	=0

.equ	PIND6	=6
.equ	PIND5	=5
.equ	PIND4	=4
.equ	PIND3	=3
.equ	PIND2	=2
.equ	PIND1	=1
.equ	PIND0	=0

.equ	RXC	=7
.equ	TXC	=6
.equ	UDRE	=5
.equ	FE	=4
.equ	OR	=3

.equ	RXCIE	=7
.equ	TXCIE	=6
.equ	UDRIE	=5
.equ	RXEN	=4
.equ	TXEN	=3
.equ	CHR9	=2
.equ	RXB8	=1
.equ	TXB8	=0

.equ	ACD	=7
.equ	ACO	=5
.equ	ACI	=4
.equ	ACIE	=3
.equ	ACIC	=2
.equ	ACIS1	=1
.equ	ACIS0	=0

.def	XL	=r26
.def	XH	=r27
.def	YL	=r28
.def	YH	=r29
.def	ZL	=r30
.def	ZH	=r31

.equ    RAMEND  =$DF    ;Last On-Chip SRAM Location
.equ	XRAMEND =$DF
.equ	E2END	=$7F
.equ	FLASHEND=$3FF


.equ	INT0addr=$001	;External Interrupt0 Vector Address
.equ	INT1addr=$002	;External Interrupt1 Vector Address
.equ	ICP1addr=$003	;Input Capture1 Interrupt Vector Address
.equ	OC1addr =$004	;Output Compare1 Interrupt Vector Address
.equ	OVF1addr=$005	;Overflow1 Interrupt Vector Address
.equ	OVF0addr=$006	;Overflow0 Interrupt Vector Address
.equ	URXCaddr=$007	;UART Receive Complete Interrupt Vector Address
.equ	UDREaddr=$008	;UART Data Register Empty Interrupt Vector Address
.equ	UTXCaddr=$009	;UART Transmit Complete Interrupt Vector Address
.equ	ACIaddr =$00a	;Analog Comparator Interrupt Vector Address