machmin.msg

Protel99-SE-软件.zip

1250 ====> %s MIN_OFF (%d %s pt --> %d %s pt)
1260 |> ERROR L1260  Process stopped.  The equation has %d product terms
1260                the largest device support has only %d product terms.
1270 |> ERROR L1270  The %s token is not supported in MACHXL.
1300
1310 |> WARNING L1310  Device %s has only %d global clock pins.  
1310           Design has %d single-literal clocks that are either 
1310           floating or pre-placed at global clock pins.
1310           They are: %s
1320 |> ERROR L1320  Hard disk is full!
1400
1401 |> ERROR L1401  Error in TRE  file.
1401    Please run Parse (Check Syntax).
1500
1600 |> ERROR L1600  Error trying to allocate %ld bytes of memory.
1600                Cannot exceed 64K bytes.
1601 |> INTERNAL_ERROR L1601 set size mismatch error.
1601	 Call AMD, 1-800-222-9323.
1620 |> WARNING L1620  Equation was not minimized since it 
1620                  requires %ld bytes of memory.
1620                  Cannot exceed 64K bytes.
1700 |> ERROR L1700  Cannot support this device.
1701 |> SYSTEM_ERROR L1701  Cannot open PALEXMIN.PDF file.
1701    Call AMD, 1-800-222-9323.
1702 |> INTERNAL_ERROR L1702  PAL device not supported in PALEXMIN.PDF.
1702     Call AMD, 1-800-222-9323.
1703 |> SYSTEM_ERROR L1703  Incorrect PALEXMIN.PDF file format.
1703     Call AMD, 1-800-222-9323.
1711 |> SYSTEM_ERROR L1711  Cannot open PLSPDF.PDF file.
1711     Call AMD, 1-800-222-9323.
1712 |> INTERNAL ERROR L1712 PLS device not supported in PLSPDF.PDF.
1712     Call AMD, 1-800-222-9323.
1713 |> SYSTEM_ERROR L1713  Incorrect PLSPDF.PDF file format.
1713     Call AMD, 1-800-222-9323.
1714 |> INTERNAL_ERROR L1714  Incorrect device data structure from
1714                          PLSPDF.PDF.  Call AMD, 1-800-222-9323.
1721 |> SYSTEM_ERROR L1721  Cannot open MACHPDF.PDF file.
1721     Call AMD, 1-800-222-9323.
1722 |> INTERNAL ERROR L1722  MACH device is not supported in MACHPDF.PDF.
1722     Call AMD, 1-800-222-9323.
1723 |> SYSTEM_ERROR L1723  Incorrect MACHPDF.PDF file format.
1723     Call AMD, 1-800-222-9323.
1730 |> SYSTEM_ERROR L1730  Memory allocation failed.  Out of memory.
1730     Call AMD, 1-800-222-9323.
1740 |> SYSTEM_ERROR L1740  Cannot rename design output file.
1740     Call AMD, 1-800-222-9323.
1760 |> INTERNAL_ERROR L1760  Cannot support PROSE device.
1760     Call AMD, 1-800-222-9323.
1780 |> SYSTEM_ERROR L1780  Cannot delete temporary file.
1780     Call AMD, 1-800-222-9323.
1785 |> INTERNAL_ERROR L1785 Cannot support PROSE device.
1790 |> SYSTEM_ERROR L1790 Cannot open PARSE.MSG file for device information.
1790	Call AMD, 1-800-222-9323.
1792 |> ERROR L1792  MACHMIN support MACH devices only.  You specify %s.
1795 |> ERROR L1795  MACHMIN does not support device %s
1800 Gate splitting (%s %s) to (NODE ? %s).
1810 |> WARNING L1810  Gate splitting not supported for device %s.
1810                    Ignoring (-p) option.
1820 |> ERROR L1820 Device %s can only support a maximum of %d product terms
1820                for %s (%s). 
1820                Gate splitting (-p) option specifies %d product terms.
1830 |> ERROR L1830 Device %s can only support a maximum of %d product terms
1830                per pin. Gate splitting option (-p) 
1830                specifies %d product terms.
1833 |> WARNING L1833 The %s device supports gate splitting at threshold %d
1833                 only.  Threshold specified as %d.  Changed to %d.
1835 |> WARNING L1835 For the %s device, the signals resulting from
1835                 gate splitting can have no more than the specified 
1835                 maximum of between %d and %d product terms.  
1835                 Max pterms specified as %d.  Changed to %d.
1837 |> WARNING L1837 The %s device supports gate splitting at threshold
1837                 between %d and %d.  Threshold specified as %d.
1837                 changed to %d.
1850 Created paired node equation %s
1851 |> INTERNAL_ERROR L1851  ERROR pin-table-size: %d.
1851     Call AMD, 1-800-222-9323.
1855 |> ERROR L1805  ERROR pin %s and paired-node %s: 
1855                          Different type of equation for pair.
1857 |> ERROR L1857  Equation %s.TRST is invalid.
1857                MACH devices do not support TRST equation for nodes.
1860 Created paired pin equation %s.
1901 |> ERROR L1901  Incorrect %s equation polarity.
1902 |> WARNING L1902 Device polarity is Non-programmable. Flipping equation
1902                  polarity of pin %s to match device polarity.
1910 |> WARNING L1910 Equation polarity of %s has been changed.
1915 |> ERROR L1915 Cannot open file %s.
2000 |> ERROR L2000  Error %s: More than one primary equation exist or
2000              different type of primary eqns for pin and paired node.
2001 |> WARNING L2001  Signal %s doesn't have primary equation.
2002 |> INTERNAL ERROR L2005  Null initial state.
2005 |> INTERNAL ERROR L2005  Unknown initial state %d.
2010 |> INTERNAL ERROR L2010  ERROR XOR equation %s: Lost XORL.
2010     Call AMD, 1-800-222-9323.
2012 |> INTERNAL ERROR L2010  ERROR XOR equation %s: Lost XORR.
2012     Call AMD, 1-800-222-9323.
2015 |> INTERNAL ERROR L2015  ERROR %s: Pol of (XORL, XORR) are different.
2015     Call AMD, 1-800-222-9323.
2020 |> INTERNAL ERROR L2020  ERROR %s: PinNum of (XORL, XORR) are different.
2020     Call AMD, 1-800-222-9323.
2030 |> ERROR L2030  Error equation polarity %s:
2030                   Active-low J, K, R, and S equations are prohibited.
2040 |> WARNING L2040  %s option ignored.
2040                   Device %s does not have %s registers.
2050 |> WARNING L2050  Equation converted to %s register logic.
2060 |> ERROR L2060  Incomplete JK equation %s: Both J and K must exist.
2065 |> ERROR L2065  Incomplete RS equation %s: Both R and S must exist.
2100 |> WARNING L2100  XOR equation %s expanded.  
2100                      Both ON and OFF cover exist.
2110 |> WARNING L2110  Multiple-XOR is not supported.
2110                      Equation %s expanded to single-XOR form.
2200 |> ERROR L2200  Equation %s: Some minterm(s) belong to both ON-set and 
2200                OFF-set which is invalid.
2210 |> WARNING L2210  Duplicated item %s found in group %s.  
2210                  This item will be ignored.
2300 \n|> ERROR L2300  Error PLA file %s in line %d: unknown character %s.
2310 \n|> ERROR L2310  Syntax error in PLA file %s in line %d.
2320 \n|> ERROR L2320  Syntax error in PLA file %s in line %d.
2320                 %d binary number found in LHS plane, should be %d.
2325 \n|> ERROR L2325  Syntax error in PLA file %s in line %d.
2325                 %d binary number found in RHS plane, should be %d.
2330 |> ERROR L2330  Too many signals in ".ob" directive.
2332 |> ERROR L2330  Too many signals in ".ilb" directive.
10000
10001 |> ERROR L10001  Please run MACHBPP (Expand Boolean).
10002 |> ERROR L10002  Please run MACHEXP (Expand State).
10003 |> ERROR L10003  Please run MACHMIN without -tre2pla option first.
10530 |> WARNING L10530  Extra .i line ignored.
10540 |> WARNING L10540  Extra .o line ignored.
10550 |> WARNING L10550  Extra .mv ignored.
10560 |> WARNING L10560  Extra .phase ignored.
10570 |> WARNING L10570  Extra .pair ignored.
11200 |> WARNING L11200 Cannot permute columns without names.
11210 |> ERROR L11210 PLA Verify: PLA's are not the same size.
11215 |> ERROR L11215 Cannot compare: PLA's have different input size.
11217 |> ERROR L11217 Cannot compare: PLA's have different output size.
11220 |> ERROR L11220 Equation %s:
11220               Some minterm(s) belong to both the ON-SET and DC-SET.
11230 |> ERROR L11230 Equation %s: Some minterm(s) belong to both ON-set and 
11230                OFF-set which is invalid.
11240 |> ERROR L11240 Equation %s:
11240               Some minterm(s) belong to both the OFF-SET and DC-SET.
11250 |> ERROR L11250 There are minterms left unspecified.
11260 |> ERROR L11260 Some minterm in F is not covered by Fold u Dold.
11270 |> ERROR L11270 Some minterm in Fold is not covered by F u Dold