cl.txt

Protel99-SE-软件.zip

0228: [Internal Error - Plusasm failed]
0229:Expected either 'ON' or 'OFF' after 'MINIMIZE' !
0230:Input pin '%s' can not be placed in MINIMIZE statement !
# 0231:[Internal Error] found second pin for feedback !
0231: [Internal Error in pin assignment].
0232:Plusasm invoked with an incorrect command line !
0233:Product term: '%s' !
#
0234:Negate the output name, not the assignment operator !
0235:Partition name expected after keyword 'PARTITION' !
0236:Expected a list of equation output names after keyword 'PARTITION' !
0237:Too many output signals listed after 'PARTITION' !
0238:Since '%s' is not used as an equation output it is not allowed in
     a partition statement !
0239:You cannot use the partition statement for non-PLD components !
0240:Partition Name '%s' already used in a previous partition statement !
0241:Pin '%s' already assigned to a partition !
0242:More than two pins with attribute fastclock declared !
0243:[Internal Error] Plusasm2 cannot find partition data !
0244:[Internal Error] Corrupt partition product term !
0245:[Internal Error] Found a partition with too many fast clocks !
0246:[Internal Error] Found a partition with too many input pins !
0247:Output '%s' is only allowed to have .RSTF and  .SETF equations for this PLD !
0248:Output '%s' is not allowed to have .RSTF/.SETF equations. Use special pin !
0249:Do not use D1,D2-notation and preset together for equation output '%s' ! 
0250:[Internal Error in  output order for  partition expression !]
0251:Fast clock pin '%s' must be non-inverted and alone in clock equations only !
0252:More than two fast clocks are being used for this component !
0253:This type of equation can only have one product term !
#0254:Error message obsolete
0255:I/O pin '%s' is redeclared to a fast clock input only pin !
0256:Plusasm part 2 aborts because the partitioner/minimizer has not been run !
0257:Plusasm part 2 aborts because the partitioner/minimizer failed !
# 0258:CL_ERR_COMP_NOT_FOUND ??? Ask Leonard.
0258:[Internal Error]
0259:[Internal Error] Composite component & instance pin mismatch !
0260:[Internal Error] Composite component & expression split output mismatch !
0261:1:This pin is not used in any equation:  %s !
0262:Only one MINIMIZE statement is allowed !
       List all signals you don't want minimized in one statement, e.g.,
          MINIMIZE OFF x1 x2
                       x3 x4 ;continued on the next line if necessary
0263:String %s is declared more than once !
0264:Recursive STRING statements are not allowed. Eliminate string dependency !
0265:   string: '%s'
0266:Too many products terms, for this PLD. See overflow table below !
0267:[ Disregard this message !]
0268: Parser: %s

0269:No registered ':=' equation for '%s.RSTF' equation !
0270:No registered ':=' equation for '%s.SETF' equation !
0271:No registered ':=' or non-registered '=' equation for '%s.SETF'
     equation !
#
0272:EXTERNAL pin attribute is not allowed for this component type !
0273:Pin name '%s' can not be declared both as an internal NODE
     and external pin !
#
# new for 3.0
0274:Equation output '%s' can not have both .SHIFT and .FBK equations !
0275:Equation output '%s' requires 'X = X.D1 <op> X.D2' equation !
0276:'%s.ADD' has more than three product terms !
0277:'%s.FBK/SHIFT' can not have more than three product terms !
0278:[Internal Error] Running out of addmode product terms for '%s' !
0279:[Internal Error] Running out of feedback product terms for '%s' !
0280:Fast compare components must not have negative polarity !
0281:Not allowed to negate pad pins !
0282:Pad equation written for pin '%s', which is not declared as a pad !
0283:This kind of pad pin cannot have this kind of extension '%s' !
0284:This extension '%s' is not valid for a pad pin !
0285:Expected a pad equation here !
0286:The right side must be a pin declared as a fast_clock pin !
0287:Second LCLK or RCLK declaration or equation found for one pin !
0288:The right side must be one pin declared as a foe pin !
0289:Second FOE equation found for one pin !
0290:For an input pad, a .FOE equation is not allowed !
0291:More than one foe pin in this component !
0292:Foe pin is declared but not used !
0293:For this component type, clock pins are not allowed !
0294:Not allowed to declare more than one clock pin !
0295:Clock pin is declared but not used !
0296:Not allowed to declare more than one pad !
0297:An output pin is required for this component type !
0298:An output pad component may not have an output pin !
0299:Too many inputs for this component !
0300:An input pin is required for this component type !
0301:An input pad component may not have an input pin !
0302:[Internal Error] Partition has too many fast inputs !
0303:1:Include file '%s' had no CHIP statement, so cannot determine
       pin-list to include!  Define pin names in your main file.
0304:Can not open include file '%s' !
0305:1:Design is probably too large for the chip. Type C-Break to quit!
0306:[Internal Error]: Corrupt tristated pad net !
0307:Pld device type '%s' is used in hierarchical behavioral designs or
     schematic designs. Redeclare device type or run PLUSASM.
0308:Pld device type '%s' is for a toplevel behavioral files !
     Redeclare device type or run FITEQN.
0309:1:Pin(s) have been found dangling and redefined as INPUTPINs 
   (or FOEs, FASTCLOCKs, CEPINs) !
0310:1:Pin(s) have been found dangling and redefined as OUTPUTPINs !
0311:No output pin declared in this design !
0312:Equation output '%s' is not allow to have more than 3 product terms !
0313:Output '%s' has both dynamic and normal addmode set. Not allowed !
0314:Pal uses default tristate for all registered output !
0315:You are trying to assemble a file which has a pld type which denotes
  a whole design ! 
  For included pld files or when assembling an individual pld,
  use a different pld type.
  For whole designs, invoke the command 'FITEQN' to integrate.
0316:'%s.ADD' can only be set to VCC !
0317: .SETF/.RSTF equation may only have a one-pin product term !
0318:Only 2 fastclock pins are allowed to clock input pad registers !
0319:Only 3 fastclock pins are allowed in the design !
0320:Only 2 fastclocks are allowed to clock macrocell registers !
0321:Equation output.add = '%s' is not allowed !
     VCC is the only input allowed for .ADD equations.
0322:Pin '%s' is a input pin and cannot have this pin attribute !
0323:Incorrect equation type for UIM equation output '%s' !
0324:Delay introduced, since '%s' appear with both polarities in UIM eq. !
0325:UIM equation has input pin '%s' occurring with both polarities !
0326:UIM equation output '%s' has input with the same name !
0327:UIM Equation for '%s' will have a delay, it goes directly to a pad !
0328:NODE (UIM) is NOT allowed for this pld type !
0329:More than one pin is declared as a foe pin !
0330:Pin '%s' is a fast output enable pin, cannot be used as input pin !
0331:Pin '%s' is declared both as fast clock pin and as foe pin !
0332:FOE pin NOT allowed for this kind of pal !
0333:FOE, RCLK and LCLK equations not allowed for this pal !
0334:Non-registered '=' equation output '%s' has .setf or .rstf declared !
0335:UIM equation output '%s' cannot be listed in an minimize statement !
0336:UIM equation output '%s' cannot be listed in a partition statement !
0337:Internal PLD design name '%s' does not match equation filename !
0338:1:Output pin '%s', declared as NODE, is dangling !
0339:[Internal Error]: Clock input pin not found !
0340:Global signal '%s' may not be inverted !
0341:[Internal Error]: Both TRST and PINTRST used !
0342:Can NOT find registered ':=' or non-registered '=' equation for
     '%s.TRST' equation !
0343:TRST equation found on NODE '%s'!  Please declare as
 OUTPUTPIN or IOPIN, or declare as NODE (NODETRST), or remove TRST equation.
0344:A FOE input pin is not allowed in this equation !
0345:FOEPIN '%s' is active high only . Remove negation!
0346:CEPIN '%s' is active low only . Add negation !
0347:Pin '%s' already declared as FAST_CLOCK !
0348:Pin '%s' already declared as FOE !
0349:Pin '%s' already declared as ENABLE !
0350:Cannot use .PRLD equation for Fast Function Block output '%s' !
0351:Cannot use .ADD equation for Fast Function Block output '%s' !
0352:Illegal equation for FFB output '%s'. Only .SETF, .RSTF, .CLKF and
     .EXPORT allowed ! .TRST, .D1, .D2, .FBK and :+: are also allowed when 
     integrating a whole design.
0353:Fast Function Block output '%s' must be active-low !
0354:Output '%s' uses .EXPORT, which leaves only one pterm for this equation !
0355:.EXPORT equation is not allowed with a '%s.SETF/.RSTF' equation !
      Cannot have both !
0356:.SETF or .RSTF equation is not allowed with a '%s.EXPORT' equation !
     Cannot have both !
0357:Cannot use .EXPORT equation for High-Density FB output '%s' !
0358:'%s'.CLKF uses a product-term clock, for a FFB component!
     Redefine as FASTCLOCK !
0359:Can NOT use .EXPORT equation in last macrocell for Fast Function
     Block output '%s' !
0360:FASTINPUT pins are not allowed for this device type !
0361:Too many fast inputs. %s fast inputs are used !
0362:This pal type can have no more than %s fast inputs !
0363:I/O pin '%s' is used as input, but equation defining output
              is missing !
0364:Only one PWR statement is allowed in the design !
       List all signals you  want to have low power in one statement, e.g.,
          PWR LOW  x1 x2
                       x3 x4 ;continued on the next line if necessary
0365:Too many product terms for output %s. You can use up to 4 p-terms only!
0366:[Internal Error] Null value!
0367:Unknown option or this option should NOT be followed by '=' !
0368:Unknown option or this option should be followed by '=' !
0369:Option 'FI' can only be used in INPUTPIN and IOPIN statements !
0370:Option 'PINFBK' can only be used in IOPIN statements !
0371:Option 'UIM' can only be used in NODE statements !
0372:Option 'PINTRST' can only be used in IOPIN and OUTPUTPIN statements !
0373:Option 'FOE' can only be used in IOPIN and OUTPUTPIN statements !
0374:Pin '%s' is use in option ( FOE = ) but does not appear in
     FOEPIN declaration !
0375:Pin '%s' has been declared with multiple FOEs !
0376:Pin '%s' must be declared with a FASTCLOCK statement !
0377:Options 'RCLK','CE' and 'LE' can only be used for IOPINs and INPUTPINs !
0378:Duplicate 'RCLK' or 'LE' declarations for pin '%s' !