acad.pat

Autocad-2005-简体中文-解密版.zip

;;
;;  Copyright (C) 1991-2004 by Autodesk, Inc.
;;  Version 2.0
;;  AutoCAD Hatch Patterns
;;
;;
;;  Note: in order to ease migration of this file when upgrading 
;;  to a future version of AutoCAD, it is recommended that you add
;;  your customizations to the User Defined Hatch Patterns section at the
;;  end of this file.
;;


;; Note: Dummy pattern description used for 'Solid fill'.
*SOLID, Solid fill
45, 0,0, 0,.125
*ANGLE, Angle steel
0, 0,0, 0,.275, .2,-.075
90, 0,0, 0,.275, .2,-.075
*ANSI31, ANSI Iron, Brick, Stone masonry
45, 0,0, 0,.125
*ANSI32, ANSI Steel
45, 0,0, 0,.375
45, .176776695,0, 0,.375
*ANSI33, ANSI Bronze, Brass, Copper
45, 0,0, 0,.25
45, .176776695,0, 0,.25, .125,-.0625
*ANSI34, ANSI Plastic, Rubber
45, 0,0, 0,.75
45, .176776695,0, 0,.75
45, .353553391,0, 0,.75
45, .530330086,0, 0,.75
*ANSI35, ANSI Fire brick, Refractory material
45, 0,0, 0,.25
45, .176776695,0, 0,.25, .3125,-.0625,0,-.0625
*ANSI36, ANSI Marble, Slate, Glass
45, 0,0, .21875,.125, .3125,-.0625,0,-.0625
*ANSI37, ANSI Lead, Zinc, Magnesium, Sound/Heat/Elec Insulation
45, 0,0, 0,.125
135, 0,0, 0,.125
*ANSI38, ANSI Aluminum
45, 0,0, 0,.125
135, 0,0, .25,.125, .3125,-.1875
;;
;;  The following hatch patterns AR-xxxxx
;;  come from AEC/Architectural
;;
*AR-B816, 8x16 Block elevation stretcher bond
0,       0,0,      0,8
90,      0,0,      8,8,                          8,-8
*AR-B816C, 8x16 Block elevation stretcher bond with mortar joints
0,       0,0,      8,8,                         15.625,-.375
0,      -8,.375,   8,8,                         15.625,-.375
90,      0,0,      8,8,                        -8.375,7.625
90,     -0.375,0,  8,8,                        -8.375,7.625
*AR-B88, 8x8 Block elevation stretcher bond
0,       0,0,      0,8
90,      0,0,      8,4,                          8,-8
*AR-BRELM, Standard brick elevation english bond with mortar joints
0,      0,0,       0,5.334,                      7.625,-.375
0,      0,2.25,    0,5.334,                      7.625,-.375
0,      2,2.667,   0,5.334,                      3.625,-.375
0,      2,4.917,   0,5.334,                      3.625,-.375
90,     0,0,       0,8,                          2.25,-3.084
90,    -0.375,0,   0,8,                          2.25,-3.084
90,     2,2.667,   0,4,                          2.25,-3.084
90,     1.625,2.667,  0,4,                       2.25,-3.084
*AR-BRSTD, Standard brick elevation stretcher bond
0,       0,0,      0,2.667
90,      0,0,      2.667,4,                      2.667,-2.667
*AR-CONC, Random dot and stone pattern
50,      0,0,      4.12975034,-5.89789472,       0.75,-8.25
355,     0,0,     -2.03781207,7.37236840,        0.60,-6.6
100.4514, 0.5977168,-0.0522934, 5.7305871,-6.9397673, 0.6374019,-7.01142112
46.1842, 0,2,      6.19462551,-8.84684208,       1.125,-12.375
96.6356, 0.88936745,1.86206693, 8.59588071,-10.40965104, 0.95610288,-10.51713
351.1842, 0,2,     7.74328189,11.0585526,        0.9,-9.9
21,      1,1.5,    4.12975034,-5.89789472,       0.75,-8.25
326,     1,1.5,   -2.03781207,7.37236840,        0.60,-6.6
71.4514, 1.49742233,1.16448394, 5.7305871,-6.9397673, 0.6374019,-7.01142112
37.5,    0,0,      2.123,2.567,                  0,-6.52,0,-6.7,0,-6.625
7.5,     0,0,      3.123,3.567,                  0,-3.82,0,-6.37,0,-2.525
-32.5,  -2.23,0,   4.6234,2.678,                 0,-2.5,0,-7.8,0,-10.35
-42.5,  -3.23,0,   3.6234,4.678,                 0,-3.25,0,-5.18,0,-7.35
*AR-HBONE, Standard brick herringbone pattern @ 45 degrees
45,      0,0,      4,4,                          12,-4
135,     2.828427125,2.828427125,  4,-4,         12,-4
*AR-PARQ1, 2x12 Parquet flooring: pattern of 12x12
90,      0,0,      12,12,                        12,-12
90,      2,0,      12,12,                        12,-12
90,      4,0,      12,12,                        12,-12
90,      6,0,      12,12,                        12,-12
90,      8,0,      12,12,                        12,-12
90,     10,0,      12,12,                        12,-12
90,     12,0,      12,12,                        12,-12
0,      0,12,      12,-12,                       12,-12
0,      0,14,      12,-12,                       12,-12
0,      0,16,      12,-12,                       12,-12
0,      0,18,      12,-12,                       12,-12
0,      0,20,      12,-12,                       12,-12
0,      0,22,      12,-12,                       12,-12
0,      0,24,      12,-12,                       12,-12
*AR-RROOF, Roof shingle texture
0, 0,0, 2.2,1, 15,-2,5,-1
0, 1.33,0.5, -1,1.33, 3,-0.33,6,-0.75
0, 0.5,0.85, 5.2,0.67, 8,-1.4,4,-1
*AR-RSHKE, Roof wood shake texture
0,       0,0,      25.5,12,                        6,-5,7,-3,9,-4
0,       6,.5,     25.5,12,                        5,-19,4,-6
0,       18,-.75,  25.5,12,                        3,-31
90,      0,0,      12,8.5,                       11.5,-36.5
90,      6,0,      12,8.5,                       11.25,-36.75
90,      11,0,     12,8.5,                       10.5,-37.5
90,      18,-0.75, 12,8.5,                       11.5,-36.5
90,      21,-0.75, 12,8.5,                       11.5,-36.5
90,      30,0,     12,8.5,                       11,-37
*AR-SAND, Random dot pattern
37.5,   0,0,       1.123,1.567,                  0,-1.52,0,-1.7,0,-1.625
7.5,    0,0,       2.123,2.567,                  0,-.82,0,-1.37,0,-.525
-32.5, -1.23,0,    2.6234,1.678,                 0,-.5,0,-1.8,0,-2.35
-42.5, -1.23,0,    1.6234,2.678,                 0,-.25,0,-1.18,0,-1.35
*BOX, Box steel
90, 0,0, 0,1
90, .25,0, 0,1
0, 0,0, 0,1, -.25,.25
0, 0,.25, 0,1, -.25,.25
0, 0,.5, 0,1, .25,-.25
0, 0,.75, 0,1, .25,-.25
90, .5,0, 0,1, .25,-.25
90, .75,0, 0,1, .25,-.25
*BRASS, Brass material
0, 0,0, 0,.25
0, 0,.125, 0,.25, .125,-.0625
*BRICK, Brick or masonry-type surface
0, 0,0, 0,.25
90, 0,0, 0,.5, .25,-.25
90, .25,0, 0,.5, -.25,.25
*BRSTONE, Brick and stone
0, 0,0, 0,.33
90, .9,0,  .33,.5,    .33,-.33
90, .8,0,  .33,.5,    .33,-.33  
0, .9,.055,  .5,.33,  -.9, .1
0, .9,.11,  .5,.33,  -.9, .1
0, .9,.165,  .5,.33,  -.9, .1
0, .9,.22,  .5,.33,  -.9, .1
0, .9,.275,  .5,.33,  -.9, .1
*CLAY, Clay material
0, 0,0, 0,.1875
0, 0,.03125, 0,.1875
0, 0,.0625, 0,.1875
0, 0,.125, 0,.1875, .1875,-.125
*CORK, Cork material
0, 0,0, 0,.125
135, .0625,-.0625, 0,.35355339, .176776696,-.176776696
135, .09375,-.0625, 0,.35355339, .176776696,-.176776696
135, .125,-.0625, 0,.35355339, .176776696,-.176776696
*CROSS, A series of crosses
0, 0,0, .25,.25, .125,-.375
90, .0625,-.0625, .25,.25, .125,-.375
*DASH, Dashed lines
0, 0,0, .125,.125, .125,-.125
*DOLMIT, Geological rock layering
0, 0,0, 0,.25
45, 0,0, 0,.70710678, .35355339,-.70710768
*DOTS, A series of dots
0, 0,0, .03125,.0625, 0,-.0625
*EARTH, Earth or ground (subterranean)
0, 0,0, .25,.25, .25,-.25
0, 0,.09375, .25,.25, .25,-.25
0, 0,.1875, .25,.25, .25,-.25
90, .03125,.21875, .25,.25, .25,-.25
90, .125,.21875, .25,.25, .25,-.25
90, .21875,.21875, .25,.25, .25,-.25
*ESCHER, Escher pattern
60, 0,0, -.6,1.039230484, 1.1,-.1
180, 0,0, -.6,1.039230484, 1.1,-.1
300, 0,0, .6,1.039230484, 1.1,-.1
60, .1,0, -.6,1.039230484, .2,-1
300, .1,0, .6,1.039230484, .2,-1
60, -.05,.08660254, -.6,1.039230484, .2,-1
180, -.05,.08660254, -.6,1.039230484, .2,-1
300, -.05,-.08660254, .6,1.039230484, .2,-1
180, -.05,-.08660254, -.6,1.039230484, .2,-1
60, -.4,0, -.6,1.039230484, .2,-1
300, -.4,0, .6,1.039230484, .2,-1
60, .2,-.346410161, -.6,1.039230484, .2,-1
180, .2,-.346410161, -.6,1.039230484, .2,-1
300, .2,.346410161, .6,1.039230484, .2,-1
180, .2,.346410161, -.6,1.039230484, .2,-1
0, .2,.173205081, -.6,1.039230484, .7,-.5
0, .2,-.173205081, -.6,1.039230484, .7,-.5
120, .05,.259807621, .6,1.039230484, .7,-.5
120, -.25,.08660254, .6,1.039230484, .7,-.5
240, -.25,-.08660254, .6,1.039230484, .7,-.5
240, .05,-.259807621, .6,1.039230484, .7,-.5
*FLEX, Flexible material
0, 0,0, 0,.25, .25,-.25
45, .25,0, .176776695,.176776695, .0625,-.228553391,.0625,-.353553391
*GRASS, Grass area
90, 0,0, .707106781,.707106781, .1875,-1.226713563
45, 0,0, 0,1, .1875,-.8125
135, 0,0, 0,1, .1875,-.8125
*GRATE, Grated area
0, 0,0, 0,.03125
90, 0,0, 0,.125
*GRAVEL,Gravel pattern
228.0128, 0.720,1.000, 12.041365,0.074329, 0.134536,-13.319088
184.9697, 0.630,0.900, -12.041517,0.043315, 0.230868,-22.855925
132.5104, 0.400,0.880, -14.865942,0.061430, 0.162788,-16.116032
267.2737, 0.010,0.630, -20.024928,0.047565, 0.210238,-20.813558
292.8337, 0.000,0.420, -12.999910,0.048507, 0.206155,-20.409373
357.2737, 0.080,0.230, -20.024928,0.047565, 0.210238,-20.813558
37.6942, 0.290,0.220, -16.401180,0.035968, 0.278029,-27.524849
72.2553, 0.510,0.390, 23.086761,0.038097, 0.262488,-25.986321
121.4296, 0.590,0.640, 15.264264,0.047405, 0.210950,-20.884073
175.2364, 0.480,0.820, -11.045049,0.083045, 0.240832,-11.800763
222.3974, 0.240,0.840, 16.278789,0.032108, 0.311448,-30.833375
138.8141, 1.000,0.620, 9.219065,0.094072, 0.106301,-10.523844
171.4692, 0.920,0.690, -13.152853,0.049447, 0.202237,-20.021511
225.0000, 0.720,0.720, 0.707107,0.707107, 0.141421,-1.272792
203.1986, 0.650,0.840, -5.383564,0.131306, 0.076158,-7.539615
291.8014, 0.580,0.810, -3.156821,0.185695, 0.107703,-5.277462
30.9638, 0.620,0.710, 3.601470,0.171499, 0.174929,-5.656023
161.5651, 0.770,0.800, -2.213594,0.316228, 0.126491,-3.035787
16.3895, 0.000,0.810, 10.440154,0.056433, 0.177200,-17.542845
70.3462, 0.170,0.860, -11.704507,0.067267, 0.148661,-14.717408
293.1986, 0.770,1.000, -5.383564,0.131306, 0.152315,-7.463458
343.6105, 0.830,0.860, -10.440154,0.056433, 0.177200,-17.542845
339.4440, 0.000,0.190, -5.383893,0.117041, 0.170880,-8.373124
294.7751, 0.160,0.130, -12.082844,0.069843, 0.143178,-14.174643
66.8014, 0.780,0.000, 5.383564,0.131306, 0.152315,-7.463458
17.3540, 0.840,0.140, -13.601340,0.059655, 0.167631,-16.595424
69.4440, 0.290,0.000, -5.383893,0.117041, 0.085440,-8.458564
101.3099, 0.720,0.000, 4.118439,0.196116, 0.050990,-5.048029
165.9638, 0.710,0.050, -3.152963,0.242536, 0.206155,-3.916950
186.0090, 0.510,0.100, -10.049739,0.052342, 0.191050,-18.913923
303.6901, 0.620,0.620, -2.218801,0.277350, 0.144222,-3.461329
353.1572, 0.700,0.500, 17.117197,0.039715, 0.251794,-24.927563
60.9454, 0.950,0.470, -8.061673,0.097129, 0.102956,-10.192674
90.0000, 1.000,0.560, 1.000,1.000, 0.060000,-0.940
120.2564, 0.490,0.130, -8.061936,0.071982, 0.138924,-13.753520
48.0128, 0.420,0.250, 12.041365,0.074329, 0.269072,-13.184552
0.0000, 0.600,0.450, 1.000,1.000, 0.260000,-0.740
325.3048, 0.860,0.450, -12.206392,0.063246, 0.158114,-15.653274
254.0546, 0.990,0.360, 4.120817,0.137361, 0.145602,-7.134508
207.6460, 0.950,0.220, 21.470869,0.042182, 0.237065,-23.469474
175.4261, 0.740,0.110, 13.038344,0.039873, 0.250799,-24.829074
*HEX, Hexagons
0, 0,0, 0,.216506351, .125,-.25
120, 0,0, 0,.216506351, .125,-.25
60, .125,0, 0,.216506351, .125,-.25
*HONEY, Honeycomb pattern
0, 0,0, .1875,.108253175, .125,-.25
120, 0,0, .1875,.108253175, .125,-.25
60, 0,0, .1875,.108253175, -.25,.125
*HOUND, Houndstooth check
0, 0,0, .25,.0625, 1,-.5
90, 0,0, -.25,.0625, 1,-.5
*INSUL, Insulation material
0, 0,0, 0,.375
0, 0,.125, 0,.375, .125,-.125
0, 0,.25, 0,.375, .125,-.125
;;
;;  Hatch Pattern Definition related to ISO/DIS 12011 line types
;;
;;  (Width * 5 = Distance between lines)
;;
;;  The size of the line segments related to the ISO/DIS 12011 linetypes
;;  define the following hatch pattern. 
;;  The pen width of 1 mm is the base of the definition. To use them with
;;  the other ISO/DIS 12011 predefined pen widths, the line has to be scaled
;;  with the appropriate value (e.g. pen width 0,5 mm -> ltscale 0.5).
;;
*ACAD_ISO02W100, dashed line
0, 0,0, 0,5, 12,-3
*ACAD_ISO03W100, dashed space line
0, 0,0, 0,5, 12,-18
*ACAD_ISO04W100, long dashed dotted line
0, 0,0, 0,5, 24,-3,.5,-3
*ACAD_ISO05W100, long dashed double dotted line
0, 0,0, 0,5, 24,-3,.5,-3,.5,-3
*ACAD_ISO06W100, long dashed triplicate dotted line
0, 0,0, 0,5, 24,-3,.5,-3,.5,-6.5
0, 0,0, 0,5, -34,.5,-3
*ACAD_ISO07W100, dotted line
0, 0,0, 0,5, .5,-3
*ACAD_ISO08W100, long dashed short dashed line
0, 0,0, 0,5, 24,-3,6,-3
*ACAD_ISO09W100, long dashed double-short-dashed line
0, 0,0, 0,5, 24,-3,6,-3,6,-3
*ACAD_ISO10W100, dashed dotted line
0, 0,0, 0,5, 12,-3,.5,-3
*ACAD_ISO11W100, double-dashed dotted line
0, 0,0, 0,5, 12,-3,12,-3,.5,-3
*ACAD_ISO12W100, dashed double-dotted line
0, 0,0, 0,5, 12,-3,.5,-3,.5,-3
*ACAD_ISO13W100, double-dashed double-dotted line
0, 0,0, 0,5, 12,-3,12,-3,.5,-6.5
0, 0,0, 0,5, -33.5,.5,-3
*ACAD_ISO14W100, dashed triplicate-dotted line
0, 0,0, 0,5, 12,-3,.5,-3,.5,-6.5
0, 0,0, 0,5, -22,.5,-3
*ACAD_ISO15W100, double-dashed triplicate-dotted line
0, 0,0, 0,5, 12,-3,12,-3,.5,-10
0, 0,0, 0,5, -33.5,.5,-3,.5,-3
;;
;; end of ACAD_ISO hatch pattern definition
;;
*LINE, Parallel horizontal lines
0, 0,0, 0,.125
*MUDST, Mud and sand
0, 0,0, .5,.25, .25,-.25,0,-.25,0,-.25
*NET, Horizontal / vertical grid
0, 0,0, 0,.125
90, 0,0, 0,.125
*NET3, Network pattern 0-60-120
0, 0,0, 0,.125
60, 0,0, 0,.125
120, 0,0, 0,.125
*PLAST, Plastic material
0, 0,0, 0,.25
0, 0,.03125, 0,.25
0, 0,.0625, 0,.25
*PLASTI, Plastic material
0, 0,0, 0,.25
0, 0,.03125, 0,.25
0, 0,.0625, 0,.25
0, 0,.15625, 0,.25
*SACNCR, Concrete
45, 0,0, 0,.09375
45, .066291261,0, 0,.09375, 0,-.09375
*SQUARE,Small aligned squares
0, 0,0, 0,.125, .125,-.125
90, 0,0, 0,.125, .125,-.125
*STARS, Star of David
0, 0,0, 0,.216506351, .125,-.125
60, 0,0, 0,.216506351, .125,-.125
120, .0625,.108253176, 0,.216506351, .125,-.125
*STEEL, Steel material
45, 0,0, 0,.125
45, 0,.0625, 0,.125
*SWAMP, Swampy area
0, 0,0, .5,.866025403, .125,-.875
90, .0625,0, .866025403,.5, .0625,-1.669550806
90, .078125,0, .866025403,.5, .05,-1.682050806
90, .046875,0, .866025403,.5, .05,-1.682050806
60, .09375,0, .5,.866025403, .04,-.96
120, .03125,0, .5,.866025403, .04,-.96
*TRANS, Heat transfer material
0, 0,0, 0,.25
0, 0,.125, 0,.25, .125,-.125
*TRIANG, Equilateral triangles
60, 0,0, .1875,.324759526, .1875,-.1875
120, 0,0, .1875,.324759526, .1875,-.1875
0, -.09375,.162379763, .1875,.324759526, .1875,-.1875
*ZIGZAG, Staircase effect
0, 0,0, .125,.125, .125,-.125
90, .125,0, .125,.125, .125,-.125

;;  
;;  User Defined Hatch Patterns
;;  Add any hatch patterns that you define to this section of
;;  the file to ensure that they migrate properly when
;;  upgrading to a future AutoCAD version.  If duplicate hatch
;;  patterns are found in this file, items in the User Defined
;;  Hatch Patterns section take precedence over patterns that
;;  appear earlier in the file.
;;