acad.mnu

Autocad-2005-简体中文-解密版.zip

//
//      AutoCAD 2005 Menu
//
//      Copyright (C) 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1994, 1996, 1997, 
//      1998, 1999, 2000, 2001, 2002, 2003, 2004 by Autodesk, Inc.
//
//      Permission to use, copy, modify, and distribute this software
//      for any purpose and without fee is hereby granted, provided that
//      the above copyright notice appears in all copies and that both
//      the copyright notice and the limited warranty and restricted rights
//      notice below appear in all supporting documentation.
//
//      AUTODESK, INC. PROVIDES THIS PROGRAM "AS IS" AND WITH ALL FAULTS.
//      AUTODESK, INC. SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTY OF
//      MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE.  AUTODESK, INC.
//      DOES NOT WARRANT THAT THE OPERATION OF THE PROGRAM WILL BE
//      UNINTERRUPTED OR ERROR FREE.
//
//      Use, duplication, or disclosure by the U.S. Government is subject to
//      restrictions set forth in FAR 52.227-19 (Commercial Computer
//      Software - Restricted Rights) and DFAR 252.227-7013(c)(1)(ii)
//      (Rights in Technical Data and Computer Software), as applicable.
//
//
//      NOTE:  AutoCAD looks for an ".mnl" (Menu Lisp) file whose name is
//             the same as that of the menu file, and loads it if
//             found.  If you modify this menu and change its name, you
//             should copy acad.mnl to <yourname>.mnl, since the menu
//             relies on AutoLISP routines found there.
//

//
//      Default AutoCAD NAMESPACE declaration:
//
***MENUGROUP=ACAD

//
//   Begin AutoCAD Digitizer Button Menus
//
***BUTTONS1
// Simple + button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1) is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=ACAD.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T

***BUTTONS2
// Shift + button
$P0=SNAP $p0=*

***BUTTONS3
// Control + button

***BUTTONS4
// Control + shift + button

//
//   Begin System Pointing Device Menus
//
***AUX1
// Simple button
// if a grip is hot bring up the Grips Cursor Menu (POP 500), else send a carriage return
// If the SHORTCUTMENU sysvar is not 0 the first item (for button 1, the "right button")
// is NOT USED.
$M=$(if,$(eq,$(substr,$(getvar,cmdnames),1,5),GRIP_),$P0=ACAD.GRIPS $P0=*);
$P0=SNAP $p0=*
^C^C
^B
^O
^G
^D
^E
^T


***AUX2
// Shift + button
$P0=SNAP $p0=*
$P0=SNAP $p0=*

***AUX3
// Control + button
$P0=SNAP $p0=*

***AUX4
// Control + shift + button
$P0=SNAP $p0=*

//
//   Begin AutoCAD Pull-down Menus
//
***POP0
**SNAP
// Shift-right-click if using the default AUX2 and/or BUTTONS2
// menus.
             [&Object Snap Cursor Menu]
ID_Tracking  [Temporary trac&k point]_tt
ID_From      [&From]_from
ID_MidTwoPts [Mid Bet&ween 2 Points]_m2p
ID_MnPointFi [->Poin&t Filters]
ID_PointFilx   [.X].X
ID_PointFily   [.Y].Y
ID_PointFilz   [.Z].Z
         [--]
ID_PointFixy   [.XY].XY
ID_PointFixz   [.XZ].XZ
ID_PointFiyz   [<-.YZ].YZ
             [--]
ID_OsnapEndp [&Endpoint]_endp
ID_OsnapMidp [&Midpoint]_mid
ID_OsnapInte [&Intersection]_int
ID_OsnapAppa [&Apparent Intersect]_appint
ID_OsnapExte [E&xtension]_ext
             [--]
ID_OsnapCent [&Center]_cen
ID_OsnapQuad [&Quadrant]_qua
ID_OsnapTang [Tan&gent]_tan
             [--]
ID_OsnapPerp [&Perpendicular]_per
ID_OsnapPara [Para&llel]_par
ID_OsnapNode [No&de]_nod
ID_OsnapInse [In&sert]_ins
ID_OsnapNear [Nea&rest]_nea
ID_OsnapNone [&None]_non
             [--]
ID_Osnap     [&Osnap Settings...]'_+dsettings 2


***POP1
**FILE
ID_MnFile    [&File]
ID_New       [&New...\tCtrl+N]^C^C_new
ID_NewSheet  [Ne&w Sheet Set...]^c^c_newsheetset
ID_Open      [&Open...\tCtrl+O]^C^C_open
ID_OpenSheet [Op&en Sheet Set...]^c^c_opensheetset
ID_OpenMarkupDWF [Load Mar&kup Set...]^c^c_opendwfmarkup
ID_DWG_CLOSE [&Close]^C^C_close
ID_PartialOp [$(if,$(eq,$(getvar,fullopen),0),,~)Partia&l Load]^C^C_partiaload
             [--]
ID_Save      [&Save\tCtrl+S]^C^C_qsave
ID_Saveas    [Save &As...\tCtrl+Shift+S]^C^C_saveas
ID_ETransmit [e&Transmit...]^C^C_etransmit
ID_Publish   [Publish to &Web...]^C^C_publishtoweb
ID_Export    [&Export...]^C^C_export
             [--]
ID_PlotSetup [Pa&ge Setup Manager...]^C^C_pagesetup
ID_PlotMgr   [Plotter &Manager...]^C^C_plottermanager
ID_PlotStyMgr [Plot St&yle Manager...]^C^C_stylesmanager
ID_Preview   [Plot Pre&view]^C^C_preview
ID_Print     [&Plot...\tCtrl+P]^C^C_plot
ID_Pub       [Publis&h...]^C^C_publish
ID_PubDetails [View Plot and Pu&blish Details...]^C^c_viewplotdetails
             [--]
ID_MnDrawing [->Drawing &Utilities]
ID_Audit       [&Audit]^C^C_audit
ID_Recover     [&Recover...]^C^C_recover
               [--]
ID_BupdateA    [&Update Block Icons]^C^C_blockicon
               [--]
ID_Purge       [<-&Purge...]^C^C_purge
ID_SendMail  [Sen&d...]
ID_Props     [Drawing Propert&ies...]^C^C_dwgprops
             [--]
ID_MRU       [Drawing History]
             [--]
ID_APP_EXIT  [E&xit\tCtrl+Q]^C^C_quit

***POP2
**EDIT
ID_MnEdit    [&Edit]
ID_U         [&Undo\tCtrl+Z]_u
ID_Redo      [&Redo\tCtrl+Y]^C^C_mredo 1
             [--]
ID_Cutclip   [Cu&t\tCtrl+X]^C^C_cutclip
ID_Copyclip  [&Copy\tCtrl+C]^C^C_copyclip
ID_Copybase  [Copy with &Base Point\tCtrl+Shift+C]^C^C_copybase
ID_Copylink  [Copy &Link]^C^C_copylink
ID_Pasteclip [&Paste\tCtrl+V]^C^C_pasteclip
ID_Pastebloc [Paste as Bloc&k\tCtrl+Shift+V]^C^C_pasteblock
ID_Pastehlnk [Paste as &Hyperlink]^C^C_pasteashyperlink
ID_Pasteorig [Paste to Original Coor&dinates]^C^C_pasteorig
ID_Pastesp   [Paste &Special...]^C^C_pastespec
             [--]
ID_Erase     [Cle&ar\tDel]^C^C_erase
ID_SelAll    [Se&lect All\tCtrl+A]^C^C_ai_selall
             [--]
ID_Links     [&OLE Links...]^C^C_olelinks
             [--]
ID_TextFind  [&Find...]^C^C_find

***POP3
**VIEW
ID_MnView    [&View]
ID_Redrawall [&Redraw]'_redrawall
ID_Regen     [Re&gen]^C^C_regen
ID_Regenall  [Regen &All]^C^C_regenall
             [--]
ID_MnZoom    [->&Zoom]
ID_ZoomRealt   [&Realtime]'_zoom ;
               [--]
ID_ZoomPrevi   [&Previous]'_zoom _p
ID_ZoomWindo   [&Window]'_zoom _w
ID_ZoomDynam   [&Dynamic]'_zoom _d
ID_ZoomScale   [&Scale]'_zoom _s
ID_ZoomCente   [&Center]'_zoom _c
ID_ZoomObjec   [O&bject]'_zoom _o
               [--]
ID_ZoomIn      [&In]'_zoom 2x
ID_ZoomOut     [&Out]'_zoom .5x
               [--]
ID_ZoomAll     [&All]'_zoom _all
ID_ZoomExten   [<-&Extents]'_zoom _e
ID_MnPan     [->&Pan]
ID_Pan         [Real&time]'_pan
ID_PanPick     [&Point]'_-pan
               [--]
ID_PanLeft     [&Left]^P'_-pan (trans (list (* -0.2 (getvar "viewsize")) 0) 0 1) ;^P
ID_PanRight    [&Right]^P'_-pan (trans (list (* 0.2 (getvar "viewsize")) 0) 0 1) ;^P
ID_PanUp       [&Up]^P'_-pan (trans (list 0 (* 0.2 (getvar "viewsize"))) 0 1) ;^P
ID_PanDown     [<-&Down]^P'_-pan (trans (list 0 (* -0.2 (getvar "viewsize"))) 0 1) ;^P
ID_Dsviewer  [Aerial Vie&w]'_dsviewer
             [--]
ID_CleanScreen [$(if,$(and,$(getvar,CleanScreenState),1),!.)&Clean Screen\tCtrl+0]$M=$(if,$(and,$(getvar,CleanScreenState),1),^C^C_CleanScreenOFF,^C^C_CleanScreenON)
			 [--]
ID_MnTiledVi [->&Viewports]
ID_Ai_tiledv   [&Named Viewports...]^C^C_+vports 1
               [--]              
ID_VportsSav   [N&ew Viewports...]^C^C_+vports 0
ID_VportsSin   [&1 Viewport]^C^C$M=$(if,$(eq,$(getvar,tilemode),1),^C^C_-vports _si,^C^C_-vports)
ID_Vports2     [&2 Viewports]^C^C_-vports _2
ID_Vports3     [&3 Viewports]^C^C_-vports _3
ID_Vports4     [&4 Viewports]^C^C_-vports _4
ID_VportsRes   [$(if,$(eq,$(getvar,tilemode),1),~)&Polygonal Viewport]^C^C_-vports _p
ID_VportsDel   [$(if,$(eq,$(getvar,tilemode),1),~)&Object]^C^C_-vports _o
               [--] 
ID_VportsJoi   [<-$(if,$(eq,$(getvar,tilemode),0),~)&Join]^C^C_-vports _j
ID_Ddview    [&Named Views...]^C^C_view
ID_MnViewpoi [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&3D Views]
ID_Ddvpoint    [V&iewpoint Presets...]^C^C_ddvpoint
ID_VpointTri   [&Viewpoint]^C^C_vpoint ;
ID_MnPlanView  [->&Plan View]
ID_PlanCurre     [&Current UCS]^C^C_plan ;
ID_PlanWorld     [&World UCS]^C^C_plan _w
ID_PlanUCS       [<-&Named UCS]^C^C_plan _u
               [--]
ID_VpointTop   [&Top]^C^C_-view _top
ID_VpointBot   [&Bottom]^C^C_-view _bottom
ID_VpointLef   [&Left]^C^C_-view _left
ID_VpointRig   [&Right]^C^C_-view _right
ID_VpointFro   [&Front]^C^C_-view _front
ID_VpointBac   [Bac&k ]^C^C_-view _back
               [--]
ID_VpointSW    [&SW Isometric]^C^C_-view _swiso
ID_VpointSE    [S&E Isometric]^C^C_-view _seiso
ID_VpointNE    [&NE Isometric]^C^C_-view _neiso
ID_VpointNW    [<-N&W Isometric]^C^C_-view _nwiso
ID_3dorbit     [$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)3D Or&bit]'_3dorbit
             [--]
ID_Hide      [&Hide]^C^C_hide
ID_MnPersShad   [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)&Shade]
ID_2doptim     [&2D Wireframe]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _2)
ID_Wireframe   [&3D Wireframe]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _3)
ID_Hidden      [&Hidden]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _h)
ID_Flat        [&Flat Shaded]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _f)
ID_Gouraud     [&Gouraud Shaded]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _g)
ID_FlatEdges   [Fla&t Shaded, Edges On]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _l)
ID_GourEdges   [<-Gouraud &Shaded, Edges On]$M=$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),^C^C_shademode,^C^C_shademode _o)
ID_MnRender  [->$(if,$(and,$(eq,$(getvar,tilemode),0),$(eq,$(getvar,cvport),1)),~,)R&ender]
ID_Render      [&Render...]^C^C_render