gdt.shp

Autocad-2005-简体中文-解密版.zip

*78,41,ucn
2,14,8,-11,-21,14,5,8,4,21,1,8,0,-21,2,8,0,21,1,8,14,-21,2,8,0,
21,1,8,0,-21,2,8,4,0,14,6,14,8,11,-9,0

*79,50,uco
2,14,8,-11,-21,14,5,8,9,21,1,41,42,43,8,-1,-3,92,8,1,-3,45,46,47,
64,33,34,35,8,1,3,84,8,-1,3,37,38,39,72,2,8,13,-21,14,6,14,8,11,
-9,0

*80,55,ucp
2,14,3,2,14,8,-21,-42,14,4,2,14,5,8,4,21,1,8,0,-21,2,8,0,21,1,
144,8,3,-1,30,45,60,43,26,8,-3,-1,152,2,8,17,-10,14,6,14,3,2,
14,8,21,-18,14,4,2,0

*81,56,ucq
2,14,8,-11,-21,14,5,8,9,21,1,41,42,43,8,-1,-3,92,8,1,-3,45,46,47,
64,33,34,35,8,1,3,84,8,-1,3,37,38,39,72,2,8,3,-17,1,110,2,8,4,2,
14,6,14,8,11,-11,0

*82,61,ucr
2,14,3,2,14,8,-21,-42,14,4,2,14,5,8,4,21,1,8,0,-21,2,8,0,21,1,
144,8,3,-1,30,45,44,43,26,8,-3,-1,152,2,112,1,8,7,-11,2,8,3,0,
14,6,14,3,2,14,8,21,-18,14,4,2,0

*83,51,ucs
2,14,8,-10,-21,14,5,8,17,18,1,38,8,-3,1,72,8,-3,-1,42,44,45,30,
47,8,6,-2,47,30,45,60,42,8,-3,-1,72,8,-3,1,38,2,8,17,-3,14,6,
14,8,10,-9,0

*84,31,uct
2,14,8,-8,-21,14,5,8,8,21,1,8,0,-21,2,8,-7,21,1,224,2,8,1,-21,
14,6,14,8,8,-9,0

*85,39,ucu
2,14,8,-11,-21,14,5,8,4,21,1,252,8,1,-3,46,8,3,-1,32,8,3,1,34,
8,1,3,244,2,8,4,-21,14,6,14,8,11,-9,0

*86,33,ucv
2,14,8,-9,-21,14,5,8,1,21,1,8,8,-21,2,8,8,21,1,8,-8,-21,2,8,9,0,
14,6,14,8,9,-9,0

*87,49,ucw
2,14,8,-12,-21,14,5,8,2,21,1,8,5,-21,2,8,5,21,1,8,-5,-21,2,8,5,
21,1,8,5,-21,2,8,5,21,1,8,-5,-21,2,8,7,0,14,6,14,8,12,-9,0

*88,33,ucx
2,14,8,-10,-21,14,5,8,3,21,1,8,14,-21,2,8,0,21,1,8,-14,-21,2,
8,17,0,14,6,14,8,10,-9,0

*89,34,ucy
2,14,8,-9,-21,14,5,8,1,21,1,8,8,-10,188,2,8,8,21,1,8,-8,-10,2,
8,9,-11,14,6,14,8,9,-9,0

*90,37,ucz
2,14,8,-10,-21,14,5,8,17,21,1,8,-14,-21,2,8,0,21,1,224,2,8,-14,
-21,1,224,2,8,3,0,14,6,14,8,10,-9,0

*91,45,klb
2,14,8,-7,-25,14,5,8,4,25,1,8,0,-32,2,8,1,32,1,8,0,-32,2,8,-1,32,
1,112,2,8,-7,-32,1,112,2,8,3,7,14,6,14,8,7,-16,0

*92,21,kbkslsh
2,14,8,-9,-25,8,0,25,1,8,18,-32,2,8,4,7,14,8,-13,-17,0

*93,45,krb
2,14,8,-7,-25,14,5,8,9,25,1,8,0,-32,2,8,1,32,1,8,0,-32,2,8,-7,32,
1,112,2,8,-7,-32,1,112,2,8,4,7,14,6,14,8,7,-16,0


*94,32,kcaret; ANSI arc length with 0.3 height and 1.5 width
2,14,8,(-20,-21),14,5,020,074,4,63,3,10,1,00C,(5,0,-51),2,4,10,3,
63,07C,020,14,6,14,8,(20,-9),0

*95,15,kundrl
2,14,0A8,02C,1,8,20,0,2,041,14,8,-14,-12,0

*96,35,kpls-min
2,14,8,-9,-21,8,9,21,1,8,0,-18,2,096,1,8,18,0,2,8,-18,-11,1,8,18,
0,2,8,8,-1,14,8,-17,-10,0

*97,35,lca; ANSI angularity with 1.5h width and 30 degree angle 
2,14,8,(-22,-21),14,5,020,3,2,8,(63,0),1,9,(-63,0),(63,36),(0,0),
2,8,(0,-36),4,2,020,14,6,14,8,(22,-9),0

*98,35,lcb; ANSI perpendicularity with 1.5h height and 2.0h width
2,14,8,(-25,-25),14,5,020,4,21,3,4,01C,1,080,2,048,1,064,2,06C,
014,040,4,4,3,21,020,14,6,14,8,(25,-13),0

*99,39,lcc; ANSI flatness: 1h ht, 1.5h wt along the baseline, 60 degrees
2,14,8,(-24,-21),14,5,020,3,2,1,9,(63,0),(24,42),(-63,0),
(-24,-42),(0,0),2,8,(63,0),8,(24,0),4,2,020,14,6,14,8,(24,-9),0

*100,26,lcd; ANSI profile surface with 1h ht and 2h wt. (uses subshape 1)
2,14,8,(-25,-21),14,5,020,4,21,1,007,1,028,2,020,3,21,020,14,6,
14,8,(25,-9),0

*101,32,lce; ANSI circularity with 1.5h diameter.
2,14,8,(-20,-25),14,5,020,4,21,3,4,2,024,1,007,2,2,060,02C,3,21,
4,4,020,14,6,14,8,(20,-13),0

*102,36,lcf; ANSI parallelism (1.5h high with 0.6h separation)
2,14,8,(-20,-25),14,5,020,3,2,8,(0,-11),007,3,2,8,(25,0),1,007,3,
2,8,(36,11),4,2,020,14,6,14,8,(20,-13),0

*103,46,lcg; ANSI cylindricity with radius h and 60 degree angle.
2,14,8,(-25,-21),14,5,020,5,3,2,8,(0,-11),1,007,3,2,8,(48,0),1,
007,3,2,6,8,(21,21),1,007,4,2,8,(63,-21),4,2,020,14,6,
14,8,(24,-13),0

*104,35,lch; ANSI runout circular 1.5h x 1.5h with 45 degree angle.
2,14,8,(-20,-25),14,5,020,4,21,3,4,01C,3,21,1,007,5,2,4,21,060,
014,4,4,3,21,020,14,6,14,8,(20,-13),0

*105,63,lci; ISO symmetry (ht: h, wt: 1.5h)
2,14,8,(-20,-21),14,5,020,5,5,4,21,3,2,014,1,030,2,014,038,4,2,3,
21,3,10,8,(95,0),1,8,(126,0),2,6,8,(95,0),1,8,(126,0),2,4,10,6,4,
21,3,2,030,4,2,3,21,020,14,6,14,8,(20,-9),0

*106,54,lcj; ANSI position (1.5 x 1.5 with radius h)
2,14,8,(-20,-25),14,5,020,4,21,3,4,024,5,1,060,2,038,034,1,06C,2,
6,010,4,4,3,21,3,2,1,007,4,2,4,2,4,21,3,4,050,02C,4,4,3,21,020,
14,6,14,8,(20,-13),0

*107,24,lck ; ANSI profile of a line with 1h ht and 2h wt (uses subshape 1)
2,14,8,(-25,-21),14,5,020,4,21,1,007,1,3,21,2,020,14,6,
14,8,(25,-9),0

*108,53,lcl; ANSI LMC (least material condition) - 1.5 dia & .8h letter height.
2,14,8,(-20,-25),14,5,020,5,4,8,3,10,090,034,8,(4,21),1,
8,(0,-21),0C0,2,4,10,3,8,
; Draw 'L' scaled by .8
6,4,21,3,4,2,024,1,007,2,2,060,02C,3,21,4,4,020,14,6,
14,8,(20,-13),0

*109,79,lcm; ANSI MMC (maximum material condition) - 1.5 dia & .8h letter height
2,14,8,(-20,-25),14,5,020,5,4,8,3,10,080,034,8,(4,21),1,
8,(0,-21),2,8,(0,21),1,8,(8,-21),2,8,(8,21),
; Draw 'M' scaled by .8
1,8,(-8,-21),2,8,(8,21),1,8,(0,-21),2,8,(4,0),4,10,3,8,6,4,21,3,
4,2,024,1,007,2,2,060,02C,3,21,4,4,020,14,6,14,8,(20,-13),0

*110,55,lcn; ANSI diameter (radius h and 1.5 height, uses shapes 3 and 4)
2,14,8,(-15,-21),14,5,5,030,5,3,2,8,(0,-11),007,3,2,4,2,
; use slash subshape.
6,3,2,038,4,2,4,21,3,2,014,4,2,3,21,3,2,1,007,4,2,4,2,6,8,(21,0),
; use 1h circle subshape.
030,14,6,14,8,(15,-13),0

*111,27,lco; ANSI square (shape) - h by h.
2,14,8,(-15,-21),14,5,020,4,21,010,1,014,018,01C,010,2,3,21,020,
14,6,14,8,(15,-9),0

*112,73,lcp; ANSI projected tolerance zone (1.5 dia & .8h letter height).
2,14,8,(-20,-25),14,5,020,5,4,8,3,10,090,034,8,(4,21),1,
8,(0,-21),2,8,(0,21),1,090,8,(3,-1),
; Draw 'P' scaled by .8
01E,02D,03C,02B,01A,8,(-3,-1),098,2,8,(17,-10),4,10,3,8,6,4,21,3,
4,2,024,1,007,2,2,060,02C,3,21,4,4,020,14,6,14,8,(20,-13),0

*113,37,lcq; center line.
4,21,3,6,2,14,8,(-2,-6),020,1,064,2,02D,1,10,1,004,02C,10,1,044,
2,02B,1,020,2,020,14,8,(-4,-3),4,6,3,21,0

*114,49,lcr; ANSI concentricity (uses subshapes 002 and 004)
2,14,8,(-20,-25),14,5,020,4,21,3,4,2,024,5,5,010,4,4,3,42,1,007,
004,4,42,3,4,2,6,1,007,002,2,6,060,02C,3,21,4,4,020,14,6,
14,8,(20,-13),0

*115,81,lcs; ANSI RFS (regardless of feature size) - 1.5 dia & .8h letter height
2,14,8,(-20,-25),14,5,020,5,4,8,3,10,090,034,8,(17,18),1,026,
8,(-3,1),048,8,(-3,-1),02A,02C,02D,01E,02F,8,(6,-2),02F,01E,02D,
03C,02A,8,(-3,-1),048,8,(-3,1),026,2,8,(17,-3),4,10,3,8,6,4,21,3,
4,2,024,1,007,2,2,060,02C,3,21,4,4,020,14,6,14,8,(20,-13),0

*116,45,lct; ANSI runout total (1.5h height and 1.1h between subshapes).
2,14,8,(-32,-25),14,5,020,4,21,3,4,01C,3,21,1,007,5,4,4,8,(23,0),
3,4,1,007,5,2,4,21,060,014,4,4,3,21,020,14,6,14,8,(32,-13),0

*117,29,lcu; ANSI straightness (2.0h length).
2,14,8,(-25,-21),14,5,020,4,21,3,2,014,1,040,2,01C,4,2,3,21,020,
14,6,14,8,(25,-9),0

*118,27,lcv; ANSI counterbore or spotface (2h wide by h high)
2,14,8,(-25,-21),14,5,020,4,21,014,1,01C,020,014,2,01C,3,21,020,
14,6,14,8,(25,-9),0

*119,26,lcw; ANSI countersink (1h high with 90 degree V).
2,14,8,(-25,-21),14,5,020,4,21,014,1,01E,012,2,01C,3,21,020,14,6,
14,8,(25,-9),0

*120,57,lcx; ANSI depth or deep (h by h with 60 degree arrowhead, .6h high).
2,14,8,(-15,-21),14,5,020,4,21,3,2,024,1,020,2,018,1,02C,2,4,2,3,
21,1,5,5,3,5,8,(-36,63),6,8,(36,63),6,2,4,5,4,21,3,2,010,4,2,3,
21,020,14,6,14,8,(15,-9),0

*121,44,lcy; ANSI conical taper (2h high with 30 degree cone, .5h extensions)
2,14,8,(-54,-32),14,5,020,4,21,3,4,5,020,02C,1,084,8,(15,-4),
8,(-15,-4),6,2,024,1,8,(19,0),2,02C,4,4,3,21,020,14,6,
14,8,(54,-21),0

*122,36,lcz; ANSI slope (h high with 15 degree angle).
2,14,8,(-41,-21),14,5,020,4,21,3,4,0F0,1,9,(-15,4),(0,-4),(15,0),
(0,0),2,4,4,3,21,020,14,6,14,8,(41,-9),0

;;
;; ASCII punctuation symbols are shapes 123 to 125.
;; 

*123,66,klbr
2,14,8,-7,-25,14,5,8,9,25,1,41,26,43,44,45,30,45,44,42,2,8,1,
14,1,43,44,45,30,45,44,43,73,79,45,44,43,26,43,44,45,2,8,-1,14,1,
46,44,43,26,43,44,45,30,47,2,8,5,7,14,6,14,8,7,-16,0

*124,25,kvbar
2,14,8,-4,-25,14,5,8,4,25,1,8,0,-32,2,8,4,7,14,6,14,8,4,-16,0

*125,66,krbr
2,14,8,-7,-25,14,5,8,5,25,1,47,30,45,44,43,26,43,44,46,2,8,-1,
14,1,45,44,43,26,43,44,45,79,73,43,44,45,30,45,44,43,2,8,1,14,1,
42,44,45,30,45,44,43,26,41,2,8,9,7,14,6,14,8,7,-16,0

*126,21,kdeg; Degree symbol
2,8,0,19,14,8,-2,-21,1,10,2,040,2,8,8,-19,14,8,-6,7,0

;;
;; ISO symbols which differ from ANSI recommendations or are not
;; included in ANSI:  angularity (130),  symmetry (131) 
;; 

*130,35,isoang; ISO angularity with 1.5h width and 45 degree angle 
2,14,8,(-22,-21),14,5,020,3,2,8,(63,0),1,9,(-63,0),(63,63),(0,0),
2,8,(0,-63),4,2,020,14,6,14,8,(22,-9),0

*131,44,isosym; ISO symmetry with 1.5h width and 1h height.
2,14,8,(-20,-21),14,5,020,005,005,005,004,21,003,10,040,1,060,2,
006,054,1,0F0,2,006,0A4,040,1,060,2,006,0F0,003,21,004,10,020,
14,6,14,8,(22,-9),0

;;
;; Additional ANSI symbol (not included in IGES 1003, but in 1001 as code 111)
;;

*132,43,lcr; ANSI all around (profile/applicability) - uses subshape 004.
2,14,8,(-20,-25),14,5,020,4,21,3,4,2,024,5,010,4,4,3,42,1,007,
004,4,42,3,4,2,6,060,02C,3,21,4,4,020,14,6,14,8,(20,-13),0

;;
;; Command symbols for special character codes %%d, %%p, and %%c.
;;

*Degree_Sign,21,kdeg
2,8,0,19,14,8,-2,-21,1,10,2,040,2,8,8,-19,14,8,-6,7,0

*Plus_Or_Minus_Sign,35,kpls-min
2,14,8,-9,-21,8,9,21,1,8,0,-18,2,096,1,8,18,0,2,8,-18,-11,1,8,18,
0,2,8,8,-1,14,8,-17,-10,0

*Diameter_Symbol,60,kdiam
2,14,3,2,14,8,-13,-40,14,4,2,8,5,17,1,029,02A,8,-1,-3,02C,8,1,-3,
02E,02F,030,021,022,8,1,3,024,8,-1,3,026,027,038,2,061,1,8,-9,
-20,2,8,17,0,14,3,2,14,8,-25,-21,14,4,2,0