pci.c

来自「U-boot源码 ARM7启动代码」· C语言 代码 · 共 190 行

C
190
字号
/* * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. * TsiChung Liew (Tsi-Chung.Liew@freescale.com) * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA *//* * PCI Configuration space access support */#include <common.h>#include <pci.h>#include <asm/io.h>#include <asm/immap.h>#if defined(CONFIG_PCI)/* System RAM mapped over PCI */#define CFG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE#define CFG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE#define CFG_PCI_SYS_MEM_SIZE	(1024 * 1024 * 1024)#define cfg_read(val, addr, type, op)		*val = op((type)(addr));#define cfg_write(val, addr, type, op)		op((type *)(addr), (val));#define PCI_OP(rw, size, type, op, mask)				\int pci_##rw##_cfg_##size(struct pci_controller *hose,			\	pci_dev_t dev, int offset, type val)				\{									\	u32 addr = 0;							\	u16 cfg_type = 0;						\	addr = ((offset & 0xfc) | cfg_type | (dev)  | 0x80000000);	\	out_be32(hose->cfg_addr, addr);					\	__asm__ __volatile__("nop");					\	cfg_##rw(val, hose->cfg_data + (offset & mask), type, op);	\	out_be32(hose->cfg_addr, addr & 0x7fffffff);			\	__asm__ __volatile__("nop");					\	return 0;							\}PCI_OP(read, byte, u8 *, in_8, 3)PCI_OP(read, word, u16 *, in_le16, 2)PCI_OP(write, byte, u8, out_8, 3)PCI_OP(write, word, u16, out_le16, 2)PCI_OP(write, dword, u32, out_le32, 0)int pci_read_cfg_dword(struct pci_controller *hose, pci_dev_t dev,		       int offset, u32 * val){	u32 addr;	u32 tmpv;	u32 mask = 2;		/* word access */	/* Read lower 16 bits */	addr = ((offset & 0xfc) | (dev) | 0x80000000);	out_be32(hose->cfg_addr, addr);	__asm__ __volatile__("nop");	*val = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));	out_be32(hose->cfg_addr, addr & 0x7fffffff);	__asm__ __volatile__("nop");	/* Read upper 16 bits */	offset += 2;	addr = ((offset & 0xfc) | 1 | (dev) | 0x80000000);	out_be32(hose->cfg_addr, addr);	__asm__ __volatile__("nop");	tmpv = (u32) in_le16((u16 *) (hose->cfg_data + (offset & mask)));	out_be32(hose->cfg_addr, addr & 0x7fffffff);	__asm__ __volatile__("nop");	/* combine results into dword value */	*val = (tmpv << 16) | *val;	return 0;}void pci_mcf5445x_init(struct pci_controller *hose){	volatile pci_t *pci = (volatile pci_t *)MMAP_PCI;	volatile pciarb_t *pciarb = (volatile pciarb_t *)MMAP_PCIARB;	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;	u32 barEn = 0;	pciarb->acr = 0x001f001f;	/* Set PCIGNT1, PCIREQ1, PCIREQ0/PCIGNTIN, PCIGNT0/PCIREQOUT,	   PCIREQ2, PCIGNT2 */	gpio->par_pci =	    GPIO_PAR_PCI_GNT3_GNT3 | GPIO_PAR_PCI_GNT2 | GPIO_PAR_PCI_GNT1 |	    GPIO_PAR_PCI_GNT0 | GPIO_PAR_PCI_REQ3_REQ3 | GPIO_PAR_PCI_REQ2 |	    GPIO_PAR_PCI_REQ1 | GPIO_PAR_PCI_REQ0;	pci->tcr1 |= PCI_TCR1_P;	/* Initiator windows */	pci->iw0btar = CFG_PCI_MEM_PHYS;	pci->iw1btar = CFG_PCI_IO_PHYS;	pci->iw2btar = CFG_PCI_CFG_PHYS;	pci->iwcr =	    PCI_IWCR_W0C_EN | PCI_IWCR_W1C_EN | PCI_IWCR_W1C_IO |	    PCI_IWCR_W2C_EN | PCI_IWCR_W2C_IO;	/* Enable bus master and mem access */	pci->scr = PCI_SCR_MW | PCI_SCR_B | PCI_SCR_M;	/* Cache line size and master latency */	pci->cr1 = PCI_CR1_CLS(8) | PCI_CR1_LTMR(0xFF);	pci->cr2 = 0;#ifdef CFG_PCI_BAR0	pci->bar0 = PCI_BAR_BAR0(CFG_PCI_BAR0);	pci->tbatr0 = CFG_PCI_TBATR0 | PCI_TBATR_EN;	barEn |= PCI_TCR1_B0E;#endif#ifdef CFG_PCI_BAR1	pci->bar1 = PCI_BAR_BAR1(CFG_PCI_BAR1);	pci->tbatr1 = CFG_PCI_TBATR1 | PCI_TBATR_EN;	barEn |= PCI_TCR1_B1E;#endif#ifdef CFG_PCI_BAR2	pci->bar2 = PCI_BAR_BAR2(CFG_PCI_BAR2);	pci->tbatr2 = CFG_PCI_TBATR2 | PCI_TBATR_EN;	barEn |= PCI_TCR1_B2E;#endif#ifdef CFG_PCI_BAR3	pci->bar3 = PCI_BAR_BAR3(CFG_PCI_BAR3);	pci->tbatr3 = CFG_PCI_TBATR3 | PCI_TBATR_EN;	barEn |= PCI_TCR1_B3E;#endif#ifdef CFG_PCI_BAR4	pci->bar4 = PCI_BAR_BAR4(CFG_PCI_BAR4);	pci->tbatr4 = CFG_PCI_TBATR4 | PCI_TBATR_EN;	barEn |= PCI_TCR1_B4E;#endif#ifdef CFG_PCI_BAR5	pci->bar5 = PCI_BAR_BAR5(CFG_PCI_BAR5);	pci->tbatr5 = CFG_PCI_TBATR5 | PCI_TBATR_EN;	barEn |= PCI_TCR1_B5E;#endif	pci->tcr2 = barEn;	/* Deassert reset bit */	pci->gscr &= ~PCI_GSCR_PR;	udelay(1000);	/* Enable PCI bus master support */	hose->first_busno = 0;	hose->last_busno = 0xff;	pci_set_region(hose->regions + 0, CFG_PCI_MEM_BUS, CFG_PCI_MEM_PHYS,		       CFG_PCI_MEM_SIZE, PCI_REGION_MEM);	pci_set_region(hose->regions + 1, CFG_PCI_IO_BUS, CFG_PCI_IO_PHYS,		       CFG_PCI_IO_SIZE, PCI_REGION_IO);	pci_set_region(hose->regions + 2, CFG_PCI_SYS_MEM_BUS,		       CFG_PCI_SYS_MEM_PHYS, CFG_PCI_SYS_MEM_SIZE,		       PCI_REGION_MEM | PCI_REGION_MEMORY);	hose->region_count = 3;	hose->cfg_addr = &(pci->car);	hose->cfg_data = (volatile unsigned char *)CFG_PCI_CFG_BUS;	pci_set_ops(hose, pci_read_cfg_byte, pci_read_cfg_word,		    pci_read_cfg_dword, pci_write_cfg_byte, pci_write_cfg_word,		    pci_write_cfg_dword);	/* Hose scan */	pci_register_hose(hose);	hose->last_busno = pci_hose_scan(hose);}#endif				/* CONFIG_PCI */

⌨️ 快捷键说明

复制代码Ctrl + C
搜索代码Ctrl + F
全屏模式F11
增大字号Ctrl + =
减小字号Ctrl + -
显示快捷键?