lxt972.c

U-boot源码 ARM7启动代码

/*
 * Intel LXT971/LXT972 PHY Driver for TI DaVinci
 * (TMS320DM644x) based boards.
 *
 * Copyright (C) 2007 Sergey Kubushyn <[e-mail]>
 *
 * --------------------------------------------------------
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#include <common.h>
#include <net.h>
#include <lxt971a.h>
#include <asm/arch/emac_defs.h>

#ifdef CONFIG_DRIVER_TI_EMAC

#ifdef CONFIG_CMD_NET

int lxt972_is_phy_connected(int phy_addr)
{
	u_int16_t	id1, id2;

	if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID1, &id1))
		return(0);
	if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_ID2, &id2))
		return(0);

	if ((id1 == (0x0013)) && ((id2  & 0xfff0) == 0x78e0))
		return(1);

	return(0);
}

int lxt972_get_link_speed(int phy_addr)
{
	u_int16_t		stat1, tmp;
	volatile emac_regs*	emac = (emac_regs *)EMAC_BASE_ADDR;

	if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_STAT2, &stat1))
		return(0);

	if (!(stat1 & PHY_LXT971_STAT2_LINK))	/* link up? */
		return(0);

	if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
		return(0);

	tmp |= PHY_LXT971_DIG_CFG_MII_DRIVE;

	dm644x_eth_phy_write(phy_addr, PHY_LXT971_DIG_CFG, tmp);
	/* Read back */
	if (!dm644x_eth_phy_read(phy_addr, PHY_LXT971_DIG_CFG, &tmp))
		return(0);


	/* Speed doesn't matter, there is no setting for it in EMAC... */
	if (stat1 & PHY_LXT971_STAT2_100BTX) {
		if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
			/* set DM644x EMAC for Full Duplex  */
			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
		} else {
			/*set DM644x EMAC for Half Duplex  */
			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
		}

		return(1);
	} else {
		if (stat1 & PHY_LXT971_STAT2_DUPLEX_MODE) {
			/* set DM644x EMAC for Full Duplex  */
			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;
		} else {
			/*set DM644x EMAC for Half Duplex  */
			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;
		}

		return(1);
	}

	return(0);
}


int lxt972_init_phy(int phy_addr)
{
	int	ret = 1;

	if (!lxt972_get_link_speed(phy_addr)) {
		/* Try another time */
		ret = lxt972_get_link_speed(phy_addr);
	}

	/* Disable PHY Interrupts */
	dm644x_eth_phy_write(phy_addr, PHY_LXT971_INT_ENABLE, 0);

	return(ret);
}


int lxt972_auto_negotiate(int phy_addr)
{
	u_int16_t	tmp;


	if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_CTRL, &tmp))
		return(0);

	/* Restart Auto_negotiation  */
	tmp |= PHY_COMMON_CTRL_RES_AUTO;
	dm644x_eth_phy_write(phy_addr, PHY_COMMON_CTRL, tmp);

	/*check AutoNegotiate complete */
	udelay (10000);
	if (!dm644x_eth_phy_read(phy_addr, PHY_COMMON_STAT, &tmp))
		return(0);

	if (!(tmp & PHY_COMMON_STAT_AN_COMP))
		return(0);

	return (lxt972_get_link_speed(phy_addr));
}

#endif	/* CONFIG_CMD_NET */

#endif	/* CONFIG_DRIVER_ETHER */