usbtty.h

U-boot源码 ARM7启动代码

/*
 * (C) Copyright 2003
 * Gerry Hamel, [e-mail], Texas Instruments
 *
 * (C) Copyright 2006
 * Bryan O'Donoghue, [e-mail], CodeHermit
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307	 USA
 *
 */

#ifndef __USB_TTY_H__
#define __USB_TTY_H__

#include "usbdcore.h"
#if defined(CONFIG_PPC)
#include "usbdcore_mpc8xx.h"
#elif defined(CONFIG_ARM)
#include "usbdcore_omap1510.h"
#endif

#include <version_autogenerated.h>

/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
 * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */

#define CONFIG_USBD_VENDORID 0x0525 	/* Linux/NetChip */
#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6	/* gserial */
#define CONFIG_USBD_PRODUCTID_CDCACM  0xa4a7	/* CDC ACM */
#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION


#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"

#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
#define CONFIG_USBD_SERIAL_OUT_PKTSIZE	UDC_OUT_PACKET_SIZE
#define CONFIG_USBD_SERIAL_IN_ENDPOINT	UDC_IN_ENDPOINT
#define CONFIG_USBD_SERIAL_IN_PKTSIZE	UDC_IN_PACKET_SIZE
#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
#define CONFIG_USBD_SERIAL_INT_PKTSIZE	UDC_INT_PACKET_SIZE
#define CONFIG_USBD_SERIAL_BULK_PKTSIZE	UDC_BULK_PACKET_SIZE

#define USBTTY_DEVICE_CLASS	COMMUNICATIONS_DEVICE_CLASS

#define USBTTY_BCD_DEVICE 	0x00
#define USBTTY_MAXPOWER	  	0x00

#define STR_LANG		0x00
#define STR_MANUFACTURER	0x01
#define STR_PRODUCT		0x02
#define STR_SERIAL		0x03
#define STR_CONFIG		0x04
#define STR_DATA_INTERFACE	0x05
#define STR_CTRL_INTERFACE	0x06
#define STR_COUNT		0x07

#endif