📄 __projnav.log
字号:
Completed process "Create Schematic Symbol".
Project Navigator Auto-Make Log File-------------------------------------
Started process "Translate".Release 5.2i - ngdbuild F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -dd _ngo -uc ../20/201.ucf -p xc9500 music.ngc music.ngd Reading NGO file "D:/music/music.ngc" ...Reading component libraries for design expansion...Annotating constraints to design from file "../20/201.ucf" ...ERROR:NgdBuild:755 - Line 2 in '../20/201.ucf': Could not find net(s) 'ce' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 3 in '../20/201.ucf': Could not find net(s) 'din<0>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 4 in '../20/201.ucf': Could not find net(s) 'din<1>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 5 in '../20/201.ucf': Could not find net(s) 'din<2>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 6 in '../20/201.ucf': Could not find net(s) 'din<3>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 7 in '../20/201.ucf': Could not find net(s) 'dir' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 8 in '../20/201.ucf': Could not find net(s) 'load' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 9 in '../20/201.ucf': Could not find net(s) 'count<3>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 10 in '../20/201.ucf': Could not find net(s) 'count<2>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 11 in '../20/201.ucf': Could not find net(s) 'count<1>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 12 in '../20/201.ucf': Could not find net(s) 'count<0>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 13 in '../20/201.ucf': Could not find net(s) 'reset' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:Parsers:11 - Encountered unrecognized constraint while parsing.ERROR:NgdBuild:19 - Errors found while parsing constraint file "../20/201.ucf".Writing NGDBUILD log file "music.bld"...Error: Completed process "Translate".
Project Navigator Auto-Make Log File-------------------------------------
Started process "Translate".Release 5.2i - ngdbuild F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -dd _ngo -uc ../20/201.ucf -p xc9500 music.ngc music.ngd Reading NGO file "D:/music/music.ngc" ...Reading component libraries for design expansion...Annotating constraints to design from file "../20/201.ucf" ...ERROR:NgdBuild:755 - Line 2 in '../20/201.ucf': Could not find net(s) 'ce' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 3 in '../20/201.ucf': Could not find net(s) 'din<0>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 4 in '../20/201.ucf': Could not find net(s) 'din<1>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 5 in '../20/201.ucf': Could not find net(s) 'din<2>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 6 in '../20/201.ucf': Could not find net(s) 'din<3>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 7 in '../20/201.ucf': Could not find net(s) 'dir' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 8 in '../20/201.ucf': Could not find net(s) 'load' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 9 in '../20/201.ucf': Could not find net(s) 'count<3>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 10 in '../20/201.ucf': Could not find net(s) 'count<2>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 11 in '../20/201.ucf': Could not find net(s) 'count<1>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 12 in '../20/201.ucf': Could not find net(s) 'count<0>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 13 in '../20/201.ucf': Could not find net(s) 'reset' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:Parsers:11 - Encountered unrecognized constraint while parsing.ERROR:NgdBuild:19 - Errors found while parsing constraint file "../20/201.ucf".Writing NGDBUILD log file "music.bld"...Error: Completed process "Translate".
Project Navigator Auto-Make Log File-------------------------------------
Started process "Translate".Release 5.2i - ngdbuild F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -dd _ngo -uc ../20/201.ucf -p xc9500 music.ngc music.ngd Reading NGO file "D:/music/music.ngc" ...Reading component libraries for design expansion...Annotating constraints to design from file "../20/201.ucf" ...ERROR:NgdBuild:755 - Line 2 in '../20/201.ucf': Could not find net(s) 'ce' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 3 in '../20/201.ucf': Could not find net(s) 'din<0>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 4 in '../20/201.ucf': Could not find net(s) 'din<1>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 5 in '../20/201.ucf': Could not find net(s) 'din<2>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 6 in '../20/201.ucf': Could not find net(s) 'din<3>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 7 in '../20/201.ucf': Could not find net(s) 'dir' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 8 in '../20/201.ucf': Could not find net(s) 'load' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 9 in '../20/201.ucf': Could not find net(s) 'count<3>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 10 in '../20/201.ucf': Could not find net(s) 'count<2>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 11 in '../20/201.ucf': Could not find net(s) 'count<1>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 12 in '../20/201.ucf': Could not find net(s) 'count<0>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 13 in '../20/201.ucf': Could not find net(s) 'reset' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:Parsers:11 - Encountered unrecognized constraint while parsing.ERROR:NgdBuild:19 - Errors found while parsing constraint file "../20/201.ucf".Writing NGDBUILD log file "music.bld"...Error: Completed process "Translate".
Project Navigator Auto-Make Log File-------------------------------------
Started process "Translate".Release 5.2i - ngdbuild F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -dd _ngo -uc ../20/201.ucf -p xc9500 music.ngc music.ngd Reading NGO file "D:/music/music.ngc" ...Reading component libraries for design expansion...Annotating constraints to design from file "../20/201.ucf" ...ERROR:NgdBuild:755 - Line 2 in '../20/201.ucf': Could not find net(s) 'ce' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 3 in '../20/201.ucf': Could not find net(s) 'din<0>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 4 in '../20/201.ucf': Could not find net(s) 'din<1>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 5 in '../20/201.ucf': Could not find net(s) 'din<2>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 6 in '../20/201.ucf': Could not find net(s) 'din<3>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 7 in '../20/201.ucf': Could not find net(s) 'dir' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 8 in '../20/201.ucf': Could not find net(s) 'load' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 9 in '../20/201.ucf': Could not find net(s) 'count<3>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 10 in '../20/201.ucf': Could not find net(s) 'count<2>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 11 in '../20/201.ucf': Could not find net(s) 'count<1>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 12 in '../20/201.ucf': Could not find net(s) 'count<0>' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:NgdBuild:755 - Line 13 in '../20/201.ucf': Could not find net(s) 'reset' in the design. To suppress this error use the -aul switch, specify the correct net name or remove the constraint.ERROR:Parsers:11 - Encountered unrecognized constraint while parsing.ERROR:NgdBuild:19 - Errors found while parsing constraint file "../20/201.ucf".Writing NGDBUILD log file "music.bld"...Error: Completed process "Translate".
Project Navigator Auto-Make Log File-------------------------------------
Started process "Translate".Release 5.2i - ngdbuild F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -dd _ngo -i -p xc9500 music.ngc music.ngd Reading NGO file "D:/music/music.ngc" ...Reading component libraries for design expansion...Checking timing specifications ...Checking expanded design ...NGDBUILD Design Results Summary: Number of errors: 0 Number of warnings: 0Writing NGD file "music.ngd" ...Writing NGDBUILD log file "music.bld"...NGDBUILD done.Completed process "Translate".
Started process "Fit".Release 5.2i - CPLD Optimizer/Partitioner F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Considering device XC95108-PC84.Flattening design..Multi-level logic optimization...Timing optimization.............................................................................................................Timing driven global resource optimizationGeneral global resource optimization........Re-checking device resources ...Mapping a total of 68 equations into 6 function blocks...........................Design music has been optimized and fit into device XC95108-7-PC84.Completed process "Fit".Started process "Generate Timing".Release 5.2i - Timing Report Generator F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Path tracing .........The number of paths traced: 871.Generating performance summary ...Generating Pad-to-Pad delay section ...Generating Clock-to-Output-Pad delay section ...Generating Setup-To-Clock-At-Pad delay section ...Generating Register-To-Register delay section ... Cycle time table for clock inclk ... Cycle time table for clock clk.Q ... Cycle time table for clock clk10.Q ...music.tim has been created.Generating Stamp model files music.mod, music.data ...music.mod has been created.music.data has been created.Completed process "Generate Timing".
Project Navigator Auto-Make Log File-------------------------------------
Started process "Translate".Release 5.2i - ngdbuild F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -dd _ngo -uc 201.ucf -p xc9500 music.ngc music.ngd Reading NGO file "D:/music/music.ngc" ...Reading component libraries for design expansion...Annotating constraints to design from file "201.ucf" ...Checking timing specifications ...Checking expanded design ...NGDBUILD Design Results Summary: Number of errors: 0 Number of warnings: 0Writing NGD file "music.ngd" ...Writing NGDBUILD log file "music.bld"...NGDBUILD done.Completed process "Translate".
Project Navigator Auto-Make Log File-------------------------------------
Started process "Translate".Release 5.2i - ngdbuild F.28Copyright (c) 1995-2002 Xilinx, Inc. All rights reserved.Command Line: ngdbuild -dd _ngo -uc 201.ucf -p xc9500 music.ngc music.ngd Reading NGO file "D:/music/music.ngc" ...Reading component libraries for design expansion...Annotating constraints to design from file "201.ucf" ...Checking timing specifications ...Checking expanded design ...NGDBUILD Design Results Summary: Number of errors: 0 Number of warnings: 0Writing NGD file "music.ngd" ...Writing NGDBUILD log file "music.bld"...NGDBUILD done.Completed process "Translate".
Project Navigator Auto-Make Log File-------------------------------------
Started process "Synthesize".=========================================================================* HDL Compilation *=========================================================================Compiling vhdl file D:/music/music.vhd in Library work.Architecture behave of Entity music is up to date.=========================================================================* HDL Analysis *=========================================================================Analyzing Entity <music> (Architecture <behave>).Entity <music> analyzed. Unit <music> generated.=========================================================================* HDL Synthesis *=========================================================================Synthesizing Unit <music>. Related source file is D:/music/music.vhd. Found 16x11-bit ROM for signal <tone>. Found 128x4-bit ROM for signal <$n0023>. Found 1-bit register for signal <spk>. Found 5-bit comparator less for signal <$n0022> created at line 31. Found 12-bit comparator greatequal for signal <$n0288> created at line 393. Found 1-bit register for signal <clk>. Found 1-bit register for signal <clk10>. Found 18-bit up counter for signal <clk10_count>. Found 5-bit up counter for signal <cnt1>. Found 8-bit up counter for signal <time1>. Found 8-bit up counter for signal <time2>. Found 11-bit up counter for signal <tone_count>. Found 4-bit register for signal <tone_index>. Found 1 1-bit 2-to-1 multiplexers. Summary: inferred 2 ROM(s). inferred 5 Counter(s). inferred 3 D-type flip-flop(s). inferred 2 Comparator(s).Unit <music> synthesized.=========================================================================HDL Synthesis ReportMacro Statistics# ROMs : 2 16x11-bit ROM : 1 128x4-bit ROM : 1# Registers : 4 1-bit register : 3 4-bit register : 1# Counters : 5 5-bit up counter : 1 18-bit up counter : 1 8-bit up counter : 2 11-bit up counter : 1# Multiplexers : 1⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -