system_incl.make

microblaze下ucos移植源码

#################################################################
# Makefile generated by Xilinx Platform Studio 
# Project:C:\work_dir\xilinx\update_to_EDK_10_1_03\Micrium-Xilinx-uCOS-II-ML403\uCOS-II_and_uBlaze_EDK_10_1_01\system.xmp
#
# WARNING : This file will be re-generated every time a command
# to run a make target is invoked. So, any changes made to this  
# file manually, will be lost when make is invoked next. 
#################################################################

XILINX_EDK_DIR = /cygdrive/c/Xilinx/10.1/EDK
NON_CYG_XILINX_EDK_DIR = c:/Xilinx/10.1/EDK

SYSTEM = system

MHSFILE = system.mhs

MSSFILE = system.mss

FPGA_ARCH = virtex4

DEVICE = xc4vfx12ff668-10

LANGUAGE = vhdl

SEARCHPATHOPT = 

SUBMODULE_OPT = 

PLATGEN_OPTIONS = -p $(DEVICE) -lang $(LANGUAGE) $(SEARCHPATHOPT) $(SUBMODULE_OPT)

LIBGEN_OPTIONS = -mhs $(MHSFILE) -p $(DEVICE) $(SEARCHPATHOPT) \
                   $(MICROBLAZE_0_LIBG_OPT)

VPGEN_OPTIONS = -p $(DEVICE) $(SEARCHPATHOPT)

MANAGE_FASTRT_OPTIONS = -reduce_fanout no

OBSERVE_PAR_OPTIONS = -error yes

EX1_OS_OUTPUT_DIR = EX1_OS
EX1_OS_OUTPUT = $(EX1_OS_OUTPUT_DIR)/executable.elf

MICROBLAZE_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/microblaze/mb_bootloop.elf
PPC405_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/ppc405/ppc_bootloop.elf
PPC440_BOOTLOOP = $(XILINX_EDK_DIR)/sw/lib/ppc440/ppc440_bootloop.elf
BOOTLOOP_DIR = bootloops

MICROBLAZE_0_BOOTLOOP = $(BOOTLOOP_DIR)/microblaze_0.elf
MICROBLAZE_0_XMDSTUB = microblaze_0/code/xmdstub.elf

BRAMINIT_ELF_FILES =  $(EX1_OS_OUTPUT) 
BRAMINIT_ELF_FILE_ARGS =   -pe microblaze_0 $(EX1_OS_OUTPUT) 

ALL_USER_ELF_FILES = $(EX1_OS_OUTPUT) 

SIM_CMD = vsim

BEHAVIORAL_SIM_SCRIPT = simulation/behavioral/$(SYSTEM)_setup.do

STRUCTURAL_SIM_SCRIPT = simulation/structural/$(SYSTEM)_setup.do

TIMING_SIM_SCRIPT = simulation/timing/$(SYSTEM)_setup.do

DEFAULT_SIM_SCRIPT = $(BEHAVIORAL_SIM_SCRIPT)

MIX_LANG_SIM_OPT = -mixed yes

SIMGEN_OPTIONS = -p $(DEVICE) -lang $(LANGUAGE) $(SEARCHPATHOPT) $(BRAMINIT_ELF_FILE_ARGS) $(MIX_LANG_SIM_OPT)  -s mti -X C:/work_dir/xilinx/update_to_EDK_10_1_03/Micrium-Xilinx-uCOS-II-ML403/uCOS-II_and_uBlaze_EDK_10_1_01/ -E C:/work_dir/xilinx/update_to_EDK_10_1_03/Micrium-Xilinx-uCOS-II-ML403/uCOS-II_and_uBlaze_EDK_10_1_01/


LIBRARIES =  \
       microblaze_0/lib/libxil.a 
VPEXEC = virtualplatform/vpexec.exe

LIBSCLEAN_TARGETS = microblaze_0_libsclean 

PROGRAMCLEAN_TARGETS = EX1_OS_programclean 

CORE_STATE_DEVELOPMENT_FILES = 

WRAPPER_NGC_FILES = implementation/microblaze_0_wrapper.ngc \
implementation/mb_plb_wrapper.ngc \
implementation/ilmb_wrapper.ngc \
implementation/dlmb_wrapper.ngc \
implementation/dlmb_cntlr_wrapper.ngc \
implementation/ilmb_cntlr_wrapper.ngc \
implementation/lmb_bram_wrapper.ngc \
implementation/rs232_uart_wrapper.ngc \
implementation/leds_4bit_wrapper.ngc \
implementation/leds_positions_wrapper.ngc \
implementation/sram_wrapper.ngc \
implementation/xps_timer_1_wrapper.ngc \
implementation/sram_util_bus_split_0_wrapper.ngc \
implementation/clock_generator_0_wrapper.ngc \
implementation/debug_module_wrapper.ngc \
implementation/proc_sys_reset_0_wrapper.ngc \
implementation/xps_intc_0_wrapper.ngc

POSTSYN_NETLIST = implementation/$(SYSTEM).ngc

SYSTEM_BIT = implementation/$(SYSTEM).bit

DOWNLOAD_BIT = implementation/download.bit

SYSTEM_ACE = implementation/$(SYSTEM).ace

UCF_FILE = data/system.ucf

BMM_FILE = implementation/$(SYSTEM).bmm

BITGEN_UT_FILE = etc/bitgen.ut

XFLOW_OPT_FILE = etc/fast_runtime.opt
XFLOW_DEPENDENCY = __xps/xpsxflow.opt $(XFLOW_OPT_FILE)

XPLORER_DEPENDENCY = __xps/xplorer.opt
XPLORER_OPTIONS = -p $(DEVICE) -uc $(SYSTEM).ucf -bm $(SYSTEM).bmm -max_runs 7

FPGA_IMP_DEPENDENCY = $(BMM_FILE) $(POSTSYN_NETLIST) $(UCF_FILE) $(XFLOW_DEPENDENCY)

#################################################################
# SOFTWARE APPLICATION EX1_OS
#################################################################

EX1_OS_SOURCES = /cygdrive/c/Micrium/Software/EvalBoards/Xilinx/Generic/GNU/EX1_OS/app.c 

EX1_OS_HEADERS = 

EX1_OS_CC = mb-gcc
EX1_OS_CC_SIZE = mb-size
EX1_OS_CC_OPT = -O2
EX1_OS_CFLAGS = 
EX1_OS_CC_SEARCH = # -B
EX1_OS_LIBPATH = -L./microblaze_0/lib/ # -L
EX1_OS_INCLUDES = -I./microblaze_0/include/ # -I
EX1_OS_LFLAGS = # -l
EX1_OS_LINKER_SCRIPT = 
EX1_OS_LINKER_SCRIPT_FLAG = #-Wl,-T -Wl,$(EX1_OS_LINKER_SCRIPT) 
EX1_OS_CC_DEBUG_FLAG =  -g 
EX1_OS_CC_PROFILE_FLAG = # -pg
EX1_OS_CC_GLOBPTR_FLAG= # -mxl-gp-opt
EX1_OS_MODE = executable
EX1_OS_LIBG_OPT = -$(EX1_OS_MODE) microblaze_0
EX1_OS_CC_INFERRED_FLAGS= -mno-xl-soft-mul -mxl-pattern-compare -mcpu=v7.10.d 
EX1_OS_CC_START_ADDR_FLAG=  # -Wl,-defsym -Wl,_TEXT_START_ADDR=
EX1_OS_CC_STACK_SIZE_FLAG=  # -Wl,-defsym -Wl,_STACK_SIZE=
EX1_OS_CC_HEAP_SIZE_FLAG=  # -Wl,-defsym -Wl,_HEAP_SIZE=
EX1_OS_OTHER_CC_FLAGS= $(EX1_OS_CC_GLOBPTR_FLAG)  \
                  $(EX1_OS_CC_START_ADDR_FLAG) $(EX1_OS_CC_STACK_SIZE_FLAG) $(EX1_OS_CC_HEAP_SIZE_FLAG)  \
                  $(EX1_OS_CC_INFERRED_FLAGS)  \
                  $(EX1_OS_LINKER_SCRIPT_FLAG) $(EX1_OS_CC_DEBUG_FLAG) $(EX1_OS_CC_PROFILE_FLAG)