system.log

microblaze下ucos移植源码

Xilinx Platform Studio (XPS)
Xilinx EDK 10.1.01 Build EDK_K_SP1.3

Copyright (c) 1995-2008 Xilinx, Inc.  All rights reserved.

At Local date and time: Thu Aug 07 12:37:55 2008
 make -f system.make init_bram started...

****************************************************
Creating system netlist for hardware specification..
****************************************************
platgen -p xc4vfx12ff668-10 -lang vhdl   system.mhs


Release Xilinx EDK 10.1.01 - platgen EDK_K_SP1.3
Copyright (c) 1995-2008 Xilinx, Inc.  All rights reserved.



Command Line: platgen -p xc4vfx12ff668-10 -lang vhdl system.mhs 

Parse system.mhs ...

Read MPD definitions ...


Overriding IP level properties ...
INFO:MDT - IPNAME:microblaze_0 INSTANCE:microblaze -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 164 - tcl is overriding PARAMETER C_ADDR_TAG_BITS
   value to 0
INFO:MDT - IPNAME:microblaze_0 INSTANCE:microblaze -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 173 - tcl is overriding PARAMETER C_DCACHE_ADDR_TAG
   value to 0


Performing IP level DRCs on properties...

Running DRC Tcl procedures for OPTION IPLEVEL_DRC_PROC...

Address Map for Processor microblaze_0
  (0000000000-0x00007fff) dlmb_cntlr	dlmb
  (0000000000-0x00007fff) ilmb_cntlr	ilmb
  (0x81400000-0x8140ffff) LEDs_4Bit	mb_plb
  (0x81420000-0x8142ffff) LEDs_Positions	mb_plb
  (0x81800000-0x8180ffff) xps_intc_0	mb_plb
  (0x83c00000-0x83c0ffff) xps_timer_1	mb_plb
  (0x84000000-0x8400ffff) RS232_Uart	mb_plb
  (0x84100000-0x841fffff) SRAM	mb_plb
  (0x84400000-0x8440ffff) debug_module	mb_plb

Check platform address map ...

Computing clock values...

Overriding system level properties ...
INFO:MDT - IPNAME:microblaze_0 INSTANCE:microblaze -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 125 - tcl is overriding PARAMETER C_D_PLB value to 1
INFO:MDT - IPNAME:microblaze_0 INSTANCE:microblaze -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 126 - tcl is overriding PARAMETER C_D_OPB value to 0
INFO:MDT - IPNAME:microblaze_0 INSTANCE:microblaze -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 128 - tcl is overriding PARAMETER C_I_PLB value to 1
INFO:MDT - IPNAME:microblaze_0 INSTANCE:microblaze -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 129 - tcl is overriding PARAMETER C_I_OPB value to 0
INFO:MDT - IPNAME:mb_plb INSTANCE:plb_v46 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\plb_v46_v1_02_a\data\plb_v4
   6_v2_1_0.mpd line 35 - tool is overriding PARAMETER C_PLBV46_NUM_MASTERS
   value to 2
INFO:MDT - IPNAME:mb_plb INSTANCE:plb_v46 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\plb_v46_v1_02_a\data\plb_v4
   6_v2_1_0.mpd line 36 - tool is overriding PARAMETER C_PLBV46_NUM_SLAVES value
   to 7
INFO:MDT - IPNAME:mb_plb INSTANCE:plb_v46 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\plb_v46_v1_02_a\data\plb_v4
   6_v2_1_0.mpd line 37 - tool is overriding PARAMETER C_PLBV46_MID_WIDTH value
   to 1
INFO:MDT - IPNAME:mb_plb INSTANCE:plb_v46 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\plb_v46_v1_02_a\data\plb_v4
   6_v2_1_0.mpd line 39 - tool is overriding PARAMETER C_PLBV46_DWIDTH value to
   32
INFO:MDT - IPNAME:ilmb INSTANCE:lmb_v10 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v1
   0_v2_1_0.mpd line 37 - tool is overriding PARAMETER C_LMB_NUM_SLAVES value to
   1
INFO:MDT - IPNAME:dlmb INSTANCE:lmb_v10 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_v10_v1_00_a\data\lmb_v1
   0_v2_1_0.mpd line 37 - tool is overriding PARAMETER C_LMB_NUM_SLAVES value to
   1

INFO:MDT - IPNAME:dlmb_cntlr INSTANCE:lmb_bram_if_cntlr -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_a\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 43 - tcl is overriding PARAMETER C_MASK
   value to 0x80000000
INFO:MDT - IPNAME:ilmb_cntlr INSTANCE:lmb_bram_if_cntlr -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\lmb_bram_if_cntlr_v2_10_a\d
   ata\lmb_bram_if_cntlr_v2_1_0.mpd line 43 - tcl is overriding PARAMETER C_MASK
   value to 0x80000000
INFO:MDT - IPNAME:lmb_bram INSTANCE:bram_block -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\bram_block_v1_00_a\data\bra
   m_block_v2_1_0.mpd line 36 - tool is overriding PARAMETER C_MEMSIZE value to
   0x8000
INFO:MDT - IPNAME:RS232_Uart INSTANCE:xps_uartlite -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_uartlite_v1_00_a\data\x
   ps_uartlite_v2_1_0.mpd line 45 - tool is overriding PARAMETER
   C_SPLB_NUM_MASTERS value to 2
INFO:MDT - IPNAME:LEDs_4Bit INSTANCE:xps_gpio -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_gpio_v1_00_a\data\xps_g
   pio_v2_1_0.mpd line 41 - tool is overriding PARAMETER C_SPLB_NUM_MASTERS
   value to 2
INFO:MDT - IPNAME:LEDs_Positions INSTANCE:xps_gpio -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_gpio_v1_00_a\data\xps_g
   pio_v2_1_0.mpd line 41 - tool is overriding PARAMETER C_SPLB_NUM_MASTERS
   value to 2
INFO:MDT - IPNAME:SRAM INSTANCE:xps_mch_emc -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_mch_emc_v1_01_a\data\xp
   s_mch_emc_v2_1_0.mpd line 47 - tool is overriding PARAMETER
   C_SPLB_NUM_MASTERS value to 2
INFO:MDT - IPNAME:xps_timer_1 INSTANCE:xps_timer -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_timer_v1_00_a\data\xps_
   timer_v2_1_0.mpd line 46 - tool is overriding PARAMETER C_SPLB_MID_WIDTH
   value to 1
INFO:MDT - IPNAME:xps_timer_1 INSTANCE:xps_timer -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_timer_v1_00_a\data\xps_
   timer_v2_1_0.mpd line 47 - tool is overriding PARAMETER C_SPLB_NUM_MASTERS
   value to 2
INFO:MDT - IPNAME:debug_module INSTANCE:mdm -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 55 - tool is overriding PARAMETER C_SPLB_MID_WIDTH value to 1
INFO:MDT - IPNAME:debug_module INSTANCE:mdm -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 56 - tool is overriding PARAMETER C_SPLB_NUM_MASTERS value to 2
INFO:MDT - IPNAME:xps_intc_0 INSTANCE:xps_intc -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_intc_v1_00_a\data\xps_i
   ntc_v2_1_0.mpd line 44 - tool is overriding PARAMETER C_SPLB_NUM_MASTERS
   value to 2
INFO:MDT - IPNAME:xps_intc_0 INSTANCE:xps_intc -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_intc_v1_00_a\data\xps_i
   ntc_v2_1_0.mpd line 48 - tcl is overriding PARAMETER C_NUM_INTR_INPUTS value
   to 1
INFO:MDT - IPNAME:xps_intc_0 INSTANCE:xps_intc -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_intc_v1_00_a\data\xps_i
   ntc_v2_1_0.mpd line 49 - tcl is overriding PARAMETER C_KIND_OF_INTR value to
   0b00000000000000000000000000000000

INFO:MDT - IPNAME:xps_intc_0 INSTANCE:xps_intc -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_intc_v1_00_a\data\xps_i
   ntc_v2_1_0.mpd line 50 - tcl is overriding PARAMETER C_KIND_OF_EDGE value to
   0b00000000000000000000000000000000
INFO:MDT - IPNAME:xps_intc_0 INSTANCE:xps_intc -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\xps_intc_v1_00_a\data\xps_i
   ntc_v2_1_0.mpd line 51 - tcl is overriding PARAMETER C_KIND_OF_LVL value to
   0b00000000000000000000000000000001

Running system level Update ...

Running UPDATE Tcl procedures for OPTION SYSLEVEL_UPDATE_PROC...

Performing System level DRCs on properties...

Running DRC Tcl procedures for OPTION SYSLEVEL_DRC_PROC...

Check platform configuration ...
IPNAME:plb_v46 INSTANCE:mb_plb -
C:\work_dir\xilinx\AN1013-uCOS-II-MicroBlaze\uCOS-II_and_uBlaze_EDK_10_1_01\syst
em.mhs line 49 - 2 master(s) : 7 slave(s)
IPNAME:lmb_v10 INSTANCE:ilmb -
C:\work_dir\xilinx\AN1013-uCOS-II-MicroBlaze\uCOS-II_and_uBlaze_EDK_10_1_01\syst
em.mhs line 56 - 1 master(s) : 1 slave(s)
IPNAME:lmb_v10 INSTANCE:dlmb -
C:\work_dir\xilinx\AN1013-uCOS-II-MicroBlaze\uCOS-II_and_uBlaze_EDK_10_1_01\syst
em.mhs line 63 - 1 master(s) : 1 slave(s)

Check port drivers...

WARNING:MDT - PORT:IWAIT CONNECTOR:ilmb_LMB_Wait -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 196 - No driver found. Port will be driven to GND!
WARNING:MDT - PORT:DWAIT CONNECTOR:dlmb_LMB_Wait -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 232 - No driver found. Port will be driven to GND!
WARNING:MDT - PORT:bscan_tdo1 CONNECTOR:bscan_tdo1 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 197 - No driver found. Port will be driven to GND!
WARNING:MDT - PORT:I_ADDRTAG CONNECTOR:ilmb_M_ADDRTAG -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 194 - floating connection!
WARNING:MDT - PORT:D_ADDRTAG CONNECTOR:dlmb_M_ADDRTAG -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\microblaze_v7_10_b\data\mic
   roblaze_v2_1_0.mpd line 235 - floating connection!
WARNING:MDT - PORT:bscan_tdi CONNECTOR:bscan_tdi -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 190 - floating connection!
WARNING:MDT - PORT:bscan_reset CONNECTOR:bscan_reset -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 191 - floating connection!
WARNING:MDT - PORT:bscan_shift CONNECTOR:bscan_shift -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 192 - floating connection!
WARNING:MDT - PORT:bscan_update CONNECTOR:bscan_update -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 193 - floating connection!
WARNING:MDT - PORT:bscan_capture CONNECTOR:bscan_capture -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 194 - floating connection!
WARNING:MDT - PORT:bscan_sel1 CONNECTOR:bscan_sel1 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 195 - floating connection!
WARNING:MDT - PORT:bscan_drck1 CONNECTOR:bscan_drck1 -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\mdm_v1_00_b\data\mdm_v2_1_0
   .mpd line 196 - floating connection!
WARNING:MDT - PORT:Peripheral_Reset CONNECTOR:sys_periph_reset -
   C:\work_dir\xilinx\AN1013-uCOS-II-MicroBlaze\uCOS-II_and_uBlaze_EDK_10_1_01\s
   ystem.mhs line 224 - floating connection!

Performing Clock DRCs...

WARNING:MDT - The value for the parameter clock_generator_0:C_DCM1_CLKIN_PERIOD
   -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\clock_generator_v2_01_a\dat
   a\clock_generator_v2_1_0.mpd line 214 is not specified in the MHS. As a
   result, the default value (0.000000) is used from the MPD. However, the value
   should be 10.000000. Please add this parameter in the MHS and set it's value
   to : 10.000000 . Please note that this warning will be converted to an ERROR
   in EDK 11.1 

WARNING:MDT - The value for the parameter clock_generator_0:C_DCM2_CLKIN_PERIOD
   -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\clock_generator_v2_01_a\dat
   a\clock_generator_v2_1_0.mpd line 247 is not specified in the MHS. As a
   result, the default value (0.000000) is used from the MPD. However, the value
   should be 10.000000. Please add this parameter in the MHS and set it's value
   to : 10.000000 . Please note that this warning will be converted to an ERROR
   in EDK 11.1 

WARNING:MDT - The value for the parameter clock_generator_0:C_DCM3_CLKIN_PERIOD
   -
   c:\Xilinx\10.1\EDK\hw\XilinxProcessorIPLib\pcores\clock_generator_v2_01_a\dat
   a\clock_generator_v2_1_0.mpd line 280 is not specified in the MHS. As a
   result, the default value (0.000000) is used from the MPD. However, the value
   should be 10.000000. Please add this parameter in the MHS and set it's value
   to : 10.000000 . Please note that this warning will be converted to an ERROR
   in EDK 11.1 


Running UPDATE Tcl procedures for OPTION PLATGEN_SYSLEVEL_UPDATE_PROC...

Modify defaults ...


Creating stub ...


Processing licensed instances ...
Completion time: 0.00 seconds

Creating hardware output directories ...

Managing hardware (BBD-specified) netlist files ...

Managing cache ...

Elaborating instances ...
IPNAME:bram_block INSTANCE:lmb_bram -
C:\work_dir\xilinx\AN1013-uCOS-II-MicroBlaze\uCOS-II_and_uBlaze_EDK_10_1_01\syst
em.mhs line 88 - elaborating IP


Writing HDL for elaborated instances ...


Inserting wrapper level ...

Completion time: 0.00 seconds

Constructing platform-level connectivity ...

Completion time: 1.00 seconds

Writing (top-level) BMM ...


Writing (top-level and wrappers) HDL ...

Generating synthesis project file ...


Running XST synthesis ...
INFO:MDT - The following instances are synthesized with XST. The MPD option
   IMP_NETLIST=TRUE indicates that a NGC file is to be produced using XST
   synthesis. IMP_NETLIST=FALSE (default) instances are not synthesized.
INSTANCE:microblaze_0 -
C:\work_dir\xilinx\AN1013-uCOS-II-MicroBlaze\uCOS-II_and_uBlaze_EDK_10_1_01\syst
em.mhs line 35 - Running XST synthesis