ufi.c

HardDiskUSBconnectsourcecode

/**************************************************************************
 *                         H E A D E R   F I L E S
 *************************************************************************/
#include <reg51.h>
#include <intrins.h>
#include <stdio.h>
#include "AT89C51SND.h"
#include "typedef.h"
#include "config.h"
#include "constant.h"
#include "global.h"
#include "gpio.h"
#include "macro.h"
#include "external.h"
#include "usb.h"

/**************************************************************************
 *                           C O N S T A N T S
 *************************************************************************/

/**************************************************************************
 *                              M A C R O S
 *************************************************************************/

/**************************************************************************
 *                          D A T A    T Y P E S
 *************************************************************************/

/**************************************************************************
 *                         G L O B A L    D A T A
 *************************************************************************/
//answer for UFI inquery command
UINT8 code ATAInquiryData[] =
{
	 0x00,0x00,0x00,0x01,0x1F,0,0,0,            //peripheral device type=0x00,RMB=0,ANSI=0,RESPONSE DATAFORMAT=1,Direct-access device
	 'w','e','i','c','h','i','n','g',                        //8 bytes for Vendor Information
	 'U','S','B',' ','D','E','V','I','C','E',' ',' ',' ',' ',' ',' ',   //16 bytes for Product Information
	 ' ',' ',' ',' ',                           //4 bytes for Product Revision

};

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
void dmaCopyIn(UINT16 u16Offset, UINT8 *pu8Buf, UINT8 u8Size)
{
	UINT8 i ;
	u16Offset=0;
	for(i=0; i<u8Size; i++) UEPDATX= *(pu8Buf++) ;
}

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiInquiry(void)
{
	UINT8 TransLength;

	Usb_sel_ep(1);
	if(gCBWDataLen>36)
		TransLength=36;
	else
		TransLength=gCBWDataLen;
	
	dmaCopyIn(0, ATAInquiryData,TransLength);
	Usb_set_TXRDY_bit();
	while (!(Usb_tx_complete_bit()));
	Usb_clear_TXCMPL_bit();
	gCBWDataLen-=TransLength;
	return (0);

}

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiRead10(void)
{
	UINT8 Status ;
	gbUsbReadError=0;//for Request Sense

	Status=stReadSectors(gCmdBlock.CB1.LUN,gCmdBlock.CB1.LBA.ULONG, gCmdBlock.CB1.Length2.INTEGER) ;

	if(Status)
	{
		if(gCBWDataLen!=0)//SEND NULL DATA IN BULK-IN ENDPOINT.
		{
			Usb_set_TXRDY_bit();
			while (!(Usb_tx_complete_bit()));
			Usb_clear_TXCMPL_bit();
		}
		gCBWDataLen=gOrgCBWDataLen;
		gbUsbReadError=1;
	}

	return(Status);
}
/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiWrite10(void)
{
	UINT8 Status;
	gbUsbWriteError=0;

	Status=stWriteSectors(gCmdBlock.CB1.LUN, gCmdBlock.CB1.LBA.ULONG, gCmdBlock.CB1.Length2.INTEGER) ;
	if(Status)
	{
		if(gCBWDataLen!=0)//STALL ENDPOINT2
		{

			Usb_sel_ep(2);
				Usb_set_STALLRQ();
		}
		gCBWDataLen=gOrgCBWDataLen;
		gbUsbWriteError=1;
	}
	return(Status);
}

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiRequestSense(void)
{
	Usb_sel_ep(1);
	UEPDATX=0x70;
	UEPDATX=0x00;
	UEPDATX=0x05;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x0a;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x24;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x00;
	
	Usb_set_TXRDY_bit();
	while (!(Usb_tx_complete_bit()));
	Usb_clear_TXCMPL_bit();
	gCBWDataLen=0;
	return (0);
}

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiReadCapacity(void)
{
	LongByte BAddr,TotalSectors;
		Usb_sel_ep(1);
	TotalSectors.ULONG =stGetCapacity(gCmdBlock.CB1.LUN) ;
	if(TotalSectors.ULONG==0)
		 BAddr.ULONG = 0;
	else
		 BAddr.ULONG = TotalSectors.ULONG-1;                //Last Logical Block Address

	UEPDATX= BAddr.BYTE.B3 ;                //(J)LBA range
	UEPDATX= BAddr.BYTE.B2 ;
	UEPDATX= BAddr.BYTE.B1 ;
	UEPDATX= BAddr.BYTE.B0 ;
	//Block Length In Bytes
	UEPDATX= 0x00 ;                     //(J)Block length=512 bytes
	UEPDATX= 0x00 ;
	UEPDATX= 0x02 ;
	UEPDATX= 0x00 ;
	Usb_set_TXRDY_bit();
	while (!(Usb_tx_complete_bit()));
	Usb_clear_TXCMPL_bit();
	gCBWDataLen=0;

	if(TotalSectors.ULONG==0) return(1);
	else return(0);

}


/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiReadFormatCapacities(void)
{
 
	LongByte TotalSectors;
	Usb_sel_ep(1);

	TotalSectors.ULONG =stGetCapacity(gCmdBlock.CB1.LUN) ;

	//*Capacity List
	//Reserved
	UEPDATX=0x00;
	UEPDATX=0x00;
	UEPDATX=0x00;
	//Capacity List Length
	UEPDATX= 16 ;

	//*Current/Maximum Capacity descriptor
	//Number of Blocks
	UEPDATX= TotalSectors.BYTE.B3 ;
	UEPDATX= TotalSectors.BYTE.B2 ;
	UEPDATX= TotalSectors.BYTE.B1 ;
	UEPDATX= TotalSectors.BYTE.B0 ;

	//Descriptor Code 10b Formatted Media
	UEPDATX= 0x02 ;

	//Block Length
	UEPDATX= 0x00 ;
	UEPDATX= 0x02 ;
	UEPDATX= 0x00 ;

	//*Formattable Capacity Descriptor

	//Number of Block
	UEPDATX= TotalSectors.BYTE.B3 ;
	UEPDATX= TotalSectors.BYTE.B2 ;
	UEPDATX= TotalSectors.BYTE.B1 ;
	UEPDATX= TotalSectors.BYTE.B0 ;
	//Reserved
	UEPDATX= 0x00 ;
	//Block Length
	UEPDATX= 0x00 ;
	UEPDATX= 0x02 ;
	UEPDATX= 0x00 ;
	Usb_set_TXRDY_bit();
	while (!(Usb_tx_complete_bit()));
	Usb_clear_TXCMPL_bit();
		gCBWDataLen-=20;
	if(TotalSectors.ULONG==0)return(1);
	else return(0);

}

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiTestUnitReady(void)
{
	gCBWDataLen=0;
	return 0;
}

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiModeSense6(void)
{
 	
 	Usb_sel_ep(1);
	Usb_set_TXRDY_bit();
	while (!(Usb_tx_complete_bit()));
	Usb_clear_TXCMPL_bit();
	return 1;
}
/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiModeSelect(void)
{
	Usb_sel_ep(1);
	Usb_set_TXRDY_bit();
	while (!(Usb_tx_complete_bit()));
	Usb_clear_TXCMPL_bit();
	return 1;
	
}

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiModeSense10(void)
{

	Usb_sel_ep(1);
	Usb_set_TXRDY_bit();
	while (!(Usb_tx_complete_bit()));
	Usb_clear_TXCMPL_bit();
	return 1;
}

/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 UFI_NOTSUPPORT_CMD(void)
{
	
	if(gCBWDataLen!=0)
	{
		if(gCBWFlags)//send NULL data on bulk in endpoint.
		{
			Usb_sel_ep(1);
			Usb_set_TXRDY_bit();
			while (!(Usb_tx_complete_bit()));
			Usb_clear_TXCMPL_bit();
			return 1;
		}
		else        //STALL bulk-out endpoint.
		{   Usb_sel_ep(2);
				Usb_set_STALLRQ();
			return 1;
		}
	}
	else return 1;

}
/**************************************************************************
 *  Function Name:
 *
 *  Descriptions:
 *
 *  Arguments:
 *
 *  Returns: None
 **************************************************************************/
UINT8 ufiCommandDecoder(void)
{

	//printf("UFICMD:%#X\n",gCmdBlock.CB1.OPcode);
	switch (gCmdBlock.CB1.OPcode) {
		case UFI_RequestSense :                               //0x03
			return ufiRequestSense();
		case UFI_Inquiry :                                        //0x12
			return ufiInquiry();
		case UFI_ModeSense :                                  //0x5a
			return ufiModeSense10();
		case UFI_ModeSense_ :                                 //0x1a
			return ufiModeSense6();
		case UFI_ModeSelect :                                  //0x55
		case UFI_ModeSelect_ :                                //0x15
			return ufiModeSelect();
		case UFI_Read10 :                                       //0X28
			return ufiRead10();
		case UFI_ReadCapacity :                              //0x25
			return ufiReadCapacity();
		case UFI_Write10 :
			return ufiWrite10();                             //0X2A
		case UFI_TestUnitReady:                              //0x00
			return ufiTestUnitReady();
		case UFI_ReadFormatCapacities :                   //0x23
			return ufiReadFormatCapacities();
		case UFI_AllowMediaRemove :                       //0x1e
		case UFI_Verify :                                        //0x2f
			return (0);
		default:
			return  UFI_NOTSUPPORT_CMD();          
	}
}