main.c

来自「dsp28335例程」· C语言 代码 · 共 52 行

#include "DSP2833x_Device.h"     // DSP2833x Headerfile Include File
#include "DSP2833x_Examples.h"   // DSP2833x Examples Include File

Uint16    *ExRamStart = (Uint16 *)0x100000;
extern  void   InitXintf(void);
extern	Uint16	SYSTAB[];
extern	Uint16	SCRTAB[];
void	SendData(Uint16  data);


void main(void)
{
// Step 1. Initialize System Control:
// PLL, WatchDog, enable Peripheral Clocks
// This example function is found in the DSP2833x_SysCtrl.c file.
   InitSysCtrl();

// Step 2. Initalize GPIO:
// This example function is found in the DSP2833x_Gpio.c file and
// illustrates how to set the GPIO to it's default state.
// InitGpio();  // Skipped for this example
   InitXintf();

   InitXintf16Gpio();	//zq

// Step 3. Clear all interrupts and initialize PIE vector table:
// Disable CPU interrupts
   DINT;

// Initialize the PIE control registers to their default state.
// The default state is all PIE interrupts disabled and flags
// are cleared.
// This function is found in the DSP2833x_PieCtrl.c file.
   InitPieCtrl();

// Disable CPU interrupts and clear all CPU interrupt flags:
   IER = 0x0000;
   IFR = 0x0000;

	LedReg = 0xFF;
	LcdInit(SYSTAB,SCRTAB);
	ClearScr();
	MainWindows();

    for(; ;);

}

//===========================================================================
// No more.
//===========================================================================