d3dx9core.h

VC+DirectX写的飞机小游戏

    D3DXCreateFontA(
        LPDIRECT3DDEVICE9       pDevice,  
        INT                     Height,
        UINT                    Width,
        UINT                    Weight,
        UINT                    MipLevels,
        BOOL                    Italic,
        DWORD                   CharSet,
        DWORD                   OutputPrecision,
        DWORD                   Quality,
        DWORD                   PitchAndFamily,
        LPCSTR                  pFaceName,
        LPD3DXFONT*             ppFont);

HRESULT WINAPI 
    D3DXCreateFontW(
        LPDIRECT3DDEVICE9       pDevice,  
        INT                     Height,
        UINT                    Width,
        UINT                    Weight,
        UINT                    MipLevels,
        BOOL                    Italic,
        DWORD                   CharSet,
        DWORD                   OutputPrecision,
        DWORD                   Quality,
        DWORD                   PitchAndFamily,
        LPCWSTR                 pFaceName,
        LPD3DXFONT*             ppFont);

#ifdef UNICODE
#define D3DXCreateFont D3DXCreateFontW
#else
#define D3DXCreateFont D3DXCreateFontA
#endif


HRESULT WINAPI 
    D3DXCreateFontIndirectA( 
        LPDIRECT3DDEVICE9       pDevice, 
        CONST D3DXFONT_DESCA*   pDesc, 
        LPD3DXFONT*             ppFont);

HRESULT WINAPI 
    D3DXCreateFontIndirectW( 
        LPDIRECT3DDEVICE9       pDevice, 
        CONST D3DXFONT_DESCW*   pDesc, 
        LPD3DXFONT*             ppFont);

#ifdef UNICODE
#define D3DXCreateFontIndirect D3DXCreateFontIndirectW
#else
#define D3DXCreateFontIndirect D3DXCreateFontIndirectA
#endif


#ifdef __cplusplus
}
#endif //__cplusplus



///////////////////////////////////////////////////////////////////////////
// ID3DXRenderToSurface:
// ---------------------
// This object abstracts rendering to surfaces.  These surfaces do not 
// necessarily need to be render targets.  If they are not, a compatible
// render target is used, and the result copied into surface at end scene.
//
// BeginScene, EndScene -
//    Call BeginScene() and EndScene() at the beginning and ending of your
//    scene.  These calls will setup and restore render targets, viewports, 
//    etc.. 
//
// OnLostDevice, OnResetDevice -
//    Call OnLostDevice() on this object before calling Reset() on the
//    device, so that this object can release any stateblocks and video
//    memory resources.  After Reset(), the call OnResetDevice().
///////////////////////////////////////////////////////////////////////////

typedef struct _D3DXRTS_DESC
{
    UINT                Width;
    UINT                Height;
    D3DFORMAT           Format;
    BOOL                DepthStencil;
    D3DFORMAT           DepthStencilFormat;

} D3DXRTS_DESC, *LPD3DXRTS_DESC;


typedef interface ID3DXRenderToSurface ID3DXRenderToSurface;
typedef interface ID3DXRenderToSurface *LPD3DXRENDERTOSURFACE;


// {6985F346-2C3D-43b3-BE8B-DAAE8A03D894}
DEFINE_GUID(IID_ID3DXRenderToSurface, 
0x6985f346, 0x2c3d, 0x43b3, 0xbe, 0x8b, 0xda, 0xae, 0x8a, 0x3, 0xd8, 0x94);


#undef INTERFACE
#define INTERFACE ID3DXRenderToSurface

DECLARE_INTERFACE_(ID3DXRenderToSurface, IUnknown)
{
    // IUnknown
    STDMETHOD(QueryInterface)(THIS_ REFIID iid, LPVOID *ppv) PURE;
    STDMETHOD_(ULONG, AddRef)(THIS) PURE;
    STDMETHOD_(ULONG, Release)(THIS) PURE;

    // ID3DXRenderToSurface
    STDMETHOD(GetDevice)(THIS_ LPDIRECT3DDEVICE9* ppDevice) PURE;
    STDMETHOD(GetDesc)(THIS_ D3DXRTS_DESC* pDesc) PURE;

    STDMETHOD(BeginScene)(THIS_ LPDIRECT3DSURFACE9 pSurface, CONST D3DVIEWPORT9* pViewport) PURE;
    STDMETHOD(EndScene)(THIS_ DWORD MipFilter) PURE;

    STDMETHOD(OnLostDevice)(THIS) PURE;
    STDMETHOD(OnResetDevice)(THIS) PURE;
};


#ifdef __cplusplus
extern "C" {
#endif //__cplusplus

HRESULT WINAPI
    D3DXCreateRenderToSurface(
        LPDIRECT3DDEVICE9       pDevice,
        UINT                    Width,
        UINT                    Height,
        D3DFORMAT               Format,
        BOOL                    DepthStencil,
        D3DFORMAT               DepthStencilFormat,
        LPD3DXRENDERTOSURFACE*  ppRenderToSurface);

#ifdef __cplusplus
}
#endif //__cplusplus



///////////////////////////////////////////////////////////////////////////
// ID3DXRenderToEnvMap:
// --------------------
// This object abstracts rendering to environment maps.  These surfaces 
// do not necessarily need to be render targets.  If they are not, a 
// compatible render target is used, and the result copied into the
// environment map at end scene.
//
// BeginCube, BeginSphere, BeginHemisphere, BeginParabolic -
//    This function initiates the rendering of the environment map.  As
//    parameters, you pass the textures in which will get filled in with
//    the resulting environment map.
//
// Face -
//    Call this function to initiate the drawing of each face.  For each 
//    environment map, you will call this six times.. once for each face 
//    in D3DCUBEMAP_FACES.
//
// End -
//    This will restore all render targets, and if needed compose all the
//    rendered faces into the environment map surfaces.
//
// OnLostDevice, OnResetDevice -
//    Call OnLostDevice() on this object before calling Reset() on the
//    device, so that this object can release any stateblocks and video
//    memory resources.  After Reset(), the call OnResetDevice().
///////////////////////////////////////////////////////////////////////////

typedef struct _D3DXRTE_DESC
{
    UINT        Size;
    UINT        MipLevels;
    D3DFORMAT   Format;
    BOOL        DepthStencil;
    D3DFORMAT   DepthStencilFormat;

} D3DXRTE_DESC, *LPD3DXRTE_DESC;


typedef interface ID3DXRenderToEnvMap ID3DXRenderToEnvMap;
typedef interface ID3DXRenderToEnvMap *LPD3DXRenderToEnvMap;


// {313F1B4B-C7B0-4fa2-9D9D-8D380B64385E}
DEFINE_GUID(IID_ID3DXRenderToEnvMap, 
0x313f1b4b, 0xc7b0, 0x4fa2, 0x9d, 0x9d, 0x8d, 0x38, 0xb, 0x64, 0x38, 0x5e);


#undef INTERFACE
#define INTERFACE ID3DXRenderToEnvMap

DECLARE_INTERFACE_(ID3DXRenderToEnvMap, IUnknown)
{
    // IUnknown
    STDMETHOD(QueryInterface)(THIS_ REFIID iid, LPVOID *ppv) PURE;
    STDMETHOD_(ULONG, AddRef)(THIS) PURE;
    STDMETHOD_(ULONG, Release)(THIS) PURE;

    // ID3DXRenderToEnvMap
    STDMETHOD(GetDevice)(THIS_ LPDIRECT3DDEVICE9* ppDevice) PURE;
    STDMETHOD(GetDesc)(THIS_ D3DXRTE_DESC* pDesc) PURE;

    STDMETHOD(BeginCube)(THIS_ 
        LPDIRECT3DCUBETEXTURE9 pCubeTex) PURE;

    STDMETHOD(BeginSphere)(THIS_
        LPDIRECT3DTEXTURE9 pTex) PURE;

    STDMETHOD(BeginHemisphere)(THIS_ 
        LPDIRECT3DTEXTURE9 pTexZPos,
        LPDIRECT3DTEXTURE9 pTexZNeg) PURE;

    STDMETHOD(BeginParabolic)(THIS_ 
        LPDIRECT3DTEXTURE9 pTexZPos,
        LPDIRECT3DTEXTURE9 pTexZNeg) PURE;

    STDMETHOD(Face)(THIS_ D3DCUBEMAP_FACES Face, DWORD MipFilter) PURE;
    STDMETHOD(End)(THIS_ DWORD MipFilter) PURE;

    STDMETHOD(OnLostDevice)(THIS) PURE;
    STDMETHOD(OnResetDevice)(THIS) PURE;
};


#ifdef __cplusplus
extern "C" {
#endif //__cplusplus

HRESULT WINAPI
    D3DXCreateRenderToEnvMap(
        LPDIRECT3DDEVICE9       pDevice,
        UINT                    Size,
        UINT                    MipLevels,
        D3DFORMAT               Format,
        BOOL                    DepthStencil,
        D3DFORMAT               DepthStencilFormat,
        LPD3DXRenderToEnvMap*   ppRenderToEnvMap);

#ifdef __cplusplus
}
#endif //__cplusplus



///////////////////////////////////////////////////////////////////////////
// ID3DXLine:
// ------------
// This object intends to provide an easy way to draw lines using D3D.
//
// Begin - 
//    Prepares device for drawing lines
//
// Draw -
//    Draws a line strip in screen-space.
//    Input is in the form of a array defining points on the line strip. of D3DXVECTOR2 
//
// DrawTransform -
//    Draws a line in screen-space with a specified input transformation matrix.
//
// End - 
//     Restores device state to how it was when Begin was called.
//
// SetPattern - 
//     Applies a stipple pattern to the line.  Input is one 32-bit
//     DWORD which describes the stipple pattern. 1 is opaque, 0 is
//     transparent.
//
// SetPatternScale - 
//     Stretches the stipple pattern in the u direction.  Input is one
//     floating-point value.  0.0f is no scaling, whereas 1.0f doubles
//     the length of the stipple pattern.
//
// SetWidth - 
//     Specifies the thickness of the line in the v direction.  Input is
//     one floating-point value.
//
// SetAntialias - 
//     Toggles line antialiasing.  Input is a BOOL.
//     TRUE  = Antialiasing on.
//     FALSE = Antialiasing off.
//
// SetGLLines - 
//     Toggles non-antialiased OpenGL line emulation.  Input is a BOOL.
//     TRUE  = OpenGL line emulation on.
//     FALSE = OpenGL line emulation off.
//
// OpenGL line:     Regular line:  
//   *\                *\
//   | \              /  \
//   |  \            *\   \
//   *\  \             \   \
//     \  \             \   \
//      \  *             \   *
//       \ |              \ /
//        \|               *
//         *
//
// OnLostDevice, OnResetDevice -
//    Call OnLostDevice() on this object before calling Reset() on the
//    device, so that this object can release any stateblocks and video
//    memory resources.  After Reset(), the call OnResetDevice().
///////////////////////////////////////////////////////////////////////////


typedef interface ID3DXLine ID3DXLine;
typedef interface ID3DXLine *LPD3DXLINE;


// {D379BA7F-9042-4ac4-9F5E-58192A4C6BD8}
DEFINE_GUID(IID_ID3DXLine, 
0xd379ba7f, 0x9042, 0x4ac4, 0x9f, 0x5e, 0x58, 0x19, 0x2a, 0x4c, 0x6b, 0xd8);

#undef INTERFACE
#define INTERFACE ID3DXLine

DECLARE_INTERFACE_(ID3DXLine, IUnknown)
{
    // IUnknown
    STDMETHOD(QueryInterface)(THIS_ REFIID iid, LPVOID *ppv) PURE;
    STDMETHOD_(ULONG, AddRef)(THIS) PURE;
    STDMETHOD_(ULONG, Release)(THIS) PURE;

    // ID3DXLine
    STDMETHOD(GetDevice)(THIS_ LPDIRECT3DDEVICE9* ppDevice) PURE;

    STDMETHOD(Begin)(THIS) PURE;

    STDMETHOD(Draw)(THIS_ CONST D3DXVECTOR2 *pVertexList,
        DWORD dwVertexListCount, D3DCOLOR Color) PURE;

    STDMETHOD(DrawTransform)(THIS_ CONST D3DXVECTOR3 *pVertexList,
        DWORD dwVertexListCount, CONST D3DXMATRIX* pTransform, 
        D3DCOLOR Color) PURE;

    STDMETHOD(SetPattern)(THIS_ DWORD dwPattern) PURE;
    STDMETHOD_(DWORD, GetPattern)(THIS) PURE;

    STDMETHOD(SetPatternScale)(THIS_ FLOAT fPatternScale) PURE;
    STDMETHOD_(FLOAT, GetPatternScale)(THIS) PURE;

    STDMETHOD(SetWidth)(THIS_ FLOAT fWidth) PURE;
    STDMETHOD_(FLOAT, GetWidth)(THIS) PURE;

    STDMETHOD(SetAntialias)(THIS_ BOOL bAntialias) PURE;
    STDMETHOD_(BOOL, GetAntialias)(THIS) PURE;

    STDMETHOD(SetGLLines)(THIS_ BOOL bGLLines) PURE;
    STDMETHOD_(BOOL, GetGLLines)(THIS) PURE;

    STDMETHOD(End)(THIS) PURE;

    STDMETHOD(OnLostDevice)(THIS) PURE;
    STDMETHOD(OnResetDevice)(THIS) PURE;
};


#ifdef __cplusplus
extern "C" {
#endif //__cplusplus


HRESULT WINAPI
    D3DXCreateLine(
        LPDIRECT3DDEVICE9   pDevice,
        LPD3DXLINE*         ppLine);

#ifdef __cplusplus
}
#endif //__cplusplus

#endif //__D3DX9CORE_H__