makefile

Calc Software Package for Number Calc

#    HAVE_MALLOC_H= NO		assume that the include file does not exist
#
# Select HAVE_MALLOC_H= YES for DJGPP.
#
# When in doubt, leave HAVE_MALLOC_H empty.
#
HAVE_MALLOC_H=
#HAVE_MALLOC_H= YES
#HAVE_MALLOC_H= NO

# Determine if we have the <stdlib.h> include file.
#
#    HAVE_STDLIB_H=		let the Makefile look for the include file
#    HAVE_STDLIB_H= YES		assume that the include file exists
#    HAVE_STDLIB_H= NO		assume that the include file does not exist
#
# Select HAVE_STDLIB_H= YES for DJGPP.
#
# When in doubt, leave HAVE_STDLIB_H empty.
#
HAVE_STDLIB_H=
#HAVE_STDLIB_H= YES
#HAVE_STDLIB_H= NO

# Determine if we have the <string.h> include file.
#
#    HAVE_STRING_H=		let the Makefile look for the include file
#    HAVE_STRING_H= YES		assume that the include file exists
#    HAVE_STRING_H= NO		assume that the include file does not exist
#
# Select HAVE_STRING_H= YES for DJGPP.
#
# When in doubt, leave HAVE_STRING_H empty.
#
HAVE_STRING_H=
#HAVE_STRING_H= YES
#HAVE_STRING_H= NO

# Determine if we have the <times.h> include file.
#
#    HAVE_TIMES_H=		let the Makefile look for the include file
#    HAVE_TIMES_H= YES		assume that the include file exists
#    HAVE_TIMES_H= NO		assume that the include file does not exist
#
# Select HAVE_TIMES_H= NO for DJGPP.
#
# When in doubt, leave HAVE_TIMES_H empty.
#
HAVE_TIMES_H=
#HAVE_TIMES_H= YES
#HAVE_TIMES_H= NO

# Determine if we have the <sys/times.h> include file.
#
#    HAVE_SYS_TIMES_H=		let the Makefile look for the include file
#    HAVE_SYS_TIMES_H= YES	assume that the include file exists
#    HAVE_SYS_TIMES_H= NO	assume that the include file does not exist
#
# Select HAVE_SYS_TIMES_H= YES for DJGPP.
#
# When in doubt, leave HAVE_SYS_TIMES_H empty.
#
HAVE_SYS_TIMES_H=
#HAVE_SYS_TIMES_H= YES
#HAVE_SYS_TIMES_H= NO

# Determine if we have the <time.h> include file.
#
#    HAVE_TIME_H=		let the Makefile look for the include file
#    HAVE_TIME_H= YES		assume that the include file exists
#    HAVE_TIME_H= NO		assume that the include file does not exist
#
# Select HAVE_TIME_H= YES for DJGPP.
#
# When in doubt, leave HAVE_TIME_H empty.
#
HAVE_TIME_H=
#HAVE_TIME_H= YES
#HAVE_TIME_H= NO

# Determine if we have the <sys/time.h> include file.
#
#    HAVE_SYS_TIME_H=		let the Makefile look for the include file
#    HAVE_SYS_TIME_H= YES	assume that the include file exists
#    HAVE_SYS_TIME_H= NO	assume that the include file does not exist
#
# Select HAVE_SYS_TIME_H= YES for DJGPP.
#
# When in doubt, leave HAVE_SYS_TIME_H empty.
#
HAVE_SYS_TIME_H=
#HAVE_SYS_TIME_H= YES
#HAVE_SYS_TIME_H= NO

# Determine if we have the <unistd.h> include file.
#
#    HAVE_UNISTD_H=		let the Makefile look for the include file
#    HAVE_UNISTD_H= YES		assume that the include file exists
#    HAVE_UNISTD_H= NO		assume that the include file does not exist
#
# Select HAVE_UNISTD_H= YES for DJGPP.
#
# When in doubt, leave HAVE_UNISTD_H empty.
#
HAVE_UNISTD_H=
#HAVE_UNISTD_H= YES
#HAVE_UNISTD_H= NO

# Determine if our compiler allows the -Wno-implicit flag
#
#    HAVE_NO_IMPLICIT=		let the Makefile test the -Wno-implicit flag
#    HAVE_NO_IMPLICIT= NO	Our compiler does not have -Wno-implicit flags
#    HAVE_NO_IMPLICIT= YES	Our compiler has a -Wno-implicit flag
#
# Select HAVE_NO_IMPLICIT= for DJGPP.
#
HAVE_NO_IMPLICIT=
# HAVE_NO_IMPLICIT= NO
# HAVE_NO_IMPLICIT= YES

# Determine if our compiler allows the unused attribute
#
# If HAVE_UNUSED is empty, this Makefile will run the have_unused program
# to determine if the unused attribute is supported.  If HAVE_UNUSED is set to
# -DHAVE_NO_UNUSED, then the unused attribute will not be used.
#
# Select HAVE_UNUSED= for DJGPP.
#
# If in doubt, leave HAVE_UNUSED empty and this Makefile will figure it out.
#
HAVE_UNUSED=
#HAVE_UNUSED= -DHAVE_NO_UNUSED

# System include files
#
# ${INCDIR}		where the system include (.h) files are kept
#
# For DJGPP, select:
#
#	INCDIR= /dev/env/DJDIR/include
#
# If in doubt, set:
#
#	INCDIR= /usr/include
#

#INCDIR= /usr/local/include
#INCDIR= /dev/env/DJDIR/include
INCDIR= /usr/include

# Where to install calc realted things
#
# ${BINDIR}		where to install calc binary files
# ${LIBDIR}		where calc link library (*.a) files are installed
# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
# ${CALC_INCDIR}	where the calc include files are installed
#
# NOTE: The install rule prepends installation paths with ${T}, which
#	by default is empty.  If ${T} is non-empty, then installation
#	locations will be relative to the ${T} directory.
#
# For DJGPP, select:
#
#	BINDIR= /dev/env/DJDIR/bin
#	LIBDIR= /dev/env/DJDIR/lib
#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
#
# If in doubt, set:
#
#	BINDIR= /usr/bin
#	LIBDIR= /usr/lib
#	CALC_SHAREDIR= /usr/share/calc
#
#BINDIR= /usr/local/bin
#BINDIR= /dev/env/DJDIR/bin
BINDIR= /usr/bin

#LIBDIR= /usr/local/lib
#LIBDIR= /dev/env/DJDIR/lib
LIBDIR= /usr/lib

#CALC_SHAREDIR= /usr/local/lib/calc
#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
CALC_SHAREDIR= /usr/share/calc

#CALC_INCDIR= /usr/local/include/calc
#CALC_INCDIR= /dev/env/DJDIR/include/calc
CALC_INCDIR= ${INCDIR}/calc

# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
# ---------------------------------------------------------------
# ${HELPDIR}		where the help directory is installed
# ${CUSTOMCALDIR}	where custom *.cal files are installed
# ${CUSTOMHELPDIR}	where custom help files are installed
# ${CUSTOMINCDIR}	where custom .h files are installed
# ${SCRIPTDIR}		where calc shell scripts are installed
#
# NOTE: The install rule prepends installation paths with ${T}, which
#	by default is empty.  If ${T} is non-empty, then installation
#	locations will be relative to the ${T} directory.
#
# If in doubt, set:
#
#	HELPDIR= ${CALC_SHAREDIR}/help
#	CALC_INCDIR= ${INCDIR}/calc
#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
#	SCRIPTDIR= ${BINDIR}/cscript
#
HELPDIR= ${CALC_SHAREDIR}/help
CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
CUSTOMINCDIR= ${CALC_INCDIR}/custom
SCRIPTDIR= ${BINDIR}/cscript

# T - top level directory under which calc will be installed
#
# The calc install is performed under ${T}, the calc build is
# performed under /.	The purpose for ${T} is to allow someone
# to install calc somewhere other than into the system area.
#
# For example, if:
#
#     BINDIR= /usr/bin
#     LIBDIR= /usr/lib
#     CALC_SHAREDIR= /usr/share/calc
#
# and if:
#
#     T= /var/tmp/testing
#
# Then the installation locations will be:
#
#     calc binary files:	/var/tmp/testing/usr/bin
#     calc link library:	/var/tmp/testing/usr/lib
#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
#     ... etc ...		/var/tmp/testing/...
#
# If ${T} is empty, calc is installed under /, which is the same
# top of tree for which it was built.  If ${T} is non-empty, then
# calc is installed under ${T}, as if one had to chroot under
# ${T} for calc to operate.
#
# If in doubt, use T=
#
T=

# where man pages are installed
#
# Select MANDIR= /dev/env/DJDIR/man/man1 for DJGPP.
#
# Use MANDIR= to disable installation of the calc man (source) page.
#
#MANDIR=
#MANDIR= /usr/local/man/man1
#MANDIR= /usr/man/man1
MANDIR= /usr/share/man/man1
#MANDIR= /dev/env/DJDIR/man/man1
#MANDIR= /usr/man/u_man/man1
#MANDIR= /usr/contrib/man/man1

# where cat (formatted man) pages are installed
#
# Select CATDIR= /dev/env/DJDIR/man/cat1 for DJGPP.
#
# Use CATDIR= to disable installation of the calc cat (formatted) page.
#
CATDIR=
#CATDIR= /usr/local/man/cat1
#CATDIR= /usr/local/catman/cat1
#CATDIR= /usr/man/cat1
#CATDIR= /usr/share/man/cat1
#CATDIR= /dev/env/DJDIR/man/cat1
#CATDIR= /var/cache/man/cat1
#CATDIR= /usr/man/u_man/cat1
#CATDIR= /usr/contrib/man/cat1

# extension to add on to the calc man page filename
#
# This is ignored if CATDIR is empty.
#
MANEXT= 1
#MANEXT= l

# extension to add on to the calc man page filename
#
# This is ignored if CATDIR is empty.
#
CATEXT= 1
#CATEXT= 1.gz
#CATEXT= 0
#CATEXT= l

# how to format a man page
#
# If CATDIR is non-empty, then
#
#     If NROFF is non-empty, then
#
#	  ${NROFF} ${NROFF_ARG} calc.1 > ${CATDIR}/calc.${CATEXT}
#	  	   is used to built and install the cat page
#
#     else (NROFF is empty)
#
#	  ${MANMAKE} calc.1 ${CATDIR}
#	  	     is used to built and install the cat page
# else
#
#     The cat page is not built or installed
#
# Select NROFF= groff for DJGPP.
#
# If in doubt and you don't want to fool with man pages, set MANDIR
# and CATDIR to empty and ignore the NROFF, NROFF_ARG and MANMAKE
# lines below.
#
#NROFF= nroff
NROFF=
#NROFF= groff
NROFF_ARG= -man
#NROFF_ARG= -mandoc
MANMAKE= /usr/local/bin/manmake
#MANMAKE= manmake
MANMODE= 0444
CATMODE= 0444

# If the $CALCPATH environment variable is not defined, then the following
# path will be search for calc resource file routines.
#
# Select CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR} for DJGPP.
#
CALCPATH= .:./cal:~/.cal:${CALC_SHAREDIR}:${CUSTOMCALDIR}
#CALCPATH= .;./cal;~/.cal;${CALC_SHAREDIR};${CUSTOMCALDIR}

# If the $CALCRC environment variable is not defined, then the following
# path will be search for calc resource files.
#
# Select CALCRC= ${CALC_SHAREDIR}/startup;~/.calcrc;./.calcinit for DJGPP.
#
CALCRC= ${CALC_SHAREDIR}/startup:~/.calcrc:./.calcinit
#CALCRC= ${CALC_SHAREDIR}/startup;~/.calcrc;./.calcinit

# Determine of the GNU-readline facility will be used instead of the
# built-in calc binding method.
#
# USE_READLINE=			    Do not use GNU-readline, use calc bindings
# USE_READLINE= -DUSE_READLINE	    Use GNU-readline, do not use calc bindings
#
# NOTE: If you select the 'USE_READLINE= -DUSE_READLINE' mode, you must set:
#
#	READLINE_LIB		The flags needed to link in the readline
#				and history link libraries
#	READLINE_INCLUDE	Where the readline include files reside
#				(leave blank if they are /usr/include/readline)
#
# NOTE: The GNU-readline code is not shipped with calc.	 You must have
#	the appropriate headers and link libs installed on your system in
#	order to use it.
#
# If in doubt, set USE_READLINE, READLINE_LIB and READLINE_INCLUDE to nothing.
#
USE_READLINE=
#USE_READLINE= -DUSE_READLINE
#
READLINE_LIB=
#READLINE_LIB= -lreadline -lhistory -lncurses
#READLINE_LIB= -L/usr/gnu/lib -lreadline -lhistory -lncurses
#READLINE_LIB= -L/usr/local/lib -lreadline -lhistory -lncurses
#
# For Apple OS X: install fink from http://fink.sourceforge.net
#		  and then do a 'fink install readline' and then use:
#
#READLINE_LIB= -L/sw/lib -lreadline -lhistory -lncurses
#
READLINE_INCLUDE=
#READLINE_INCLUDE= -I/usr/gnu/include
#READLINE_INCLUDE= -I/usr/local/include

# If $PAGER is not set, use this program to display a help file
#
# Select CALCPAGER= less.exe -ci for DJGPP.
#
#CALCPAGER= more
#CALCPAGER= pg
#CALCPAGER= cat
CALCPAGER= less
#CALCPAGER= less.exe -ci

# Debug/Optimize options for ${CC} and ${LCC}
#
# Select DEBUG= -O2 -gstabs+ for DJGPP.
#
#DEBUG=
#
#DEBUG= -O
#DEBUG= -O -g
#DEBUG= -O -g3
#
#DEBUG= -O1
#DEBUG= -O1 -g
#DEBUG= -O1 -g3
#
#DEBUG= -O2
#DEBUG= -O2 -g
#DEBUG= -O2 -g3
#DEBUG= -O2 -ipa
#DEBUG= -O2 -g3 -ipa
#
#DEBUG= -O3
#DEBUG= -O3 -g
DEBUG= -O3 -g3
#DEBUG= -O3 -ipa
#DEBUG= -O3 -g3 -ipa
#
#DEBUG= -std0 -fast -O4 -static
#
#DEBUG= -g
#DEBUG= -g3
#DEBUG= -gx
#DEBUG= -WM,-g
#
#DEBUG= -O2 -gstabs+

# On systems that have dynamic shared link libs, you may want want to disable