makefile

Calc Software Package for Number Calc

#
# cscript - makefile for calc shell script files
#
# Copyright (C) 1999-2006  Landon Curt Noll
#
# Calc is open software; you can redistribute it and/or modify it under
# the terms of the version 2.1 of the GNU Lesser General Public License
# as published by the Free Software Foundation.
#
# Calc is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU Lesser General
# Public License for more details.
#
# A copy of version 2.1 of the GNU Lesser General Public License is
# distributed with calc under the filename COPYING-LGPL.  You should have
# received a copy with calc; if not, write to Free Software Foundation, Inc.
# 59 Temple Place, Suite 330, Boston, MA  02111-1307, USA.
#
# @(#) $Revision: 29.31 $
# @(#) $Id: Makefile,v 29.31 2007/02/07 01:43:56 chongo Exp $
# @(#) $Source: /usr/local/src/cmd/calc/cscript/RCS/Makefile,v $
#
# Under source code control:	1999/11/29 11:10:26
# File existed as early as:	1999
#
# chongo <was here> /\oo/\	http://www.isthe.com/chongo/
# Share and enjoy!  :-) http://www.isthe.com/chongo/tech/comp/calc/
#
# calculator by David I. Bell with help/mods from others
# Makefile by Landon Curt Noll


# required vars
#
SHELL= /bin/sh
MAKE_FILE= Makefile

####
# Normally, the upper level makefile will set these values.  We provide
# a default here just in case you want to build from this directory.
####

# Where the system include (.h) files are kept
#
# For DJGPP, select:
#
#	INCDIR= /dev/env/DJDIR/include
#
# If in doubt, set:
#
#	INCDIR= /usr/include
#

#INCDIR= /usr/local/include
#INCDIR= /dev/env/DJDIR/include
INCDIR= /usr/include

# where to install calc realted things
#
# ${BINDIR}		where to install calc binary files
# ${LIBDIR}		where calc link library (*.a) files are installed
# ${CALC_SHAREDIR}	where to install calc help, .cal, startup, config files
#
# NOTE: The install rule prepends installation paths with ${T}, which
#	by default is empty.  If ${T} is non-empty, then installation
#	locations will be relative to the ${T} directory.
#
# For DJGPP, select:
#
#	BINDIR= /dev/env/DJDIR/bin
#	LIBDIR= /dev/env/DJDIR/lib
#	CALC_SHAREDIR= /dev/env/DJDIR/share/calc
#
# If in doubt, set:
#
#	BINDIR= /usr/bin
#	LIBDIR= /usr/lib
#	CALC_SHAREDIR= /usr/share/calc
#
#BINDIR= /usr/local/bin
#BINDIR= /dev/env/DJDIR/bin
BINDIR= /usr/bin

#LIBDIR= /usr/local/lib
#LIBDIR= /dev/env/DJDIR/lib
LIBDIR= /usr/lib

#CALC_SHAREDIR= /usr/local/lib/calc
#CALC_SHAREDIR= /dev/env/DJDIR/share/calc
CALC_SHAREDIR= /usr/share/calc

# By default, these values are based CALC_SHAREDIR, INCDIR, BINDIR
# ---------------------------------------------------------------
# ${HELPDIR}		where the help directory is installed
# ${CALC_INCDIR}	where the calc include files are installed
# ${CUSTOMCALDIR}	where custom *.cal files are installed
# ${CUSTOMHELPDIR}	where custom help files are installed
# ${CUSTOMINCDIR}	where custom .h files are installed
# ${SCRIPTDIR}		where calc shell scripts are installed
#
# NOTE: The install rule prepends installation paths with ${T}, which
#	by default is empty.  If ${T} is non-empty, then installation
#	locations will be relative to the ${T} directory.
#
# If in doubt, set:
#
#	HELPDIR= ${CALC_SHAREDIR}/help
#	CALC_INCDIR= ${INCDIR}/calc
#	CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
#	CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
#	CUSTOMINCDIR= ${CALC_INCDIR}/custom
#	SCRIPTDIR= ${BINDIR}/cscript
#
HELPDIR= ${CALC_SHAREDIR}/help
CALC_INCDIR= ${INCDIR}/calc
CUSTOMCALDIR= ${CALC_SHAREDIR}/custom
CUSTOMHELPDIR= ${CALC_SHAREDIR}/custhelp
CUSTOMINCDIR= ${CALC_INCDIR}/custom
SCRIPTDIR= ${BINDIR}/cscript

# T - top level directory under which calc will be installed
#
# The calc install is performed under ${T}, the calc build is
# performed under /.	The purpose for ${T} is to allow someone
# to install calc somewhere other than into the system area.
#
# For example, if:
#
#     BINDIR= /usr/bin
#     LIBDIR= /usr/lib
#     CALC_SHAREDIR= /usr/share/calc
#
# and if:
#
#     T= /var/tmp/testing
#
# Then the installation locations will be:
#
#     calc binary files:	/var/tmp/testing/usr/bin
#     calc link library:	/var/tmp/testing/usr/lib
#     calc help, .cal ...:	/var/tmp/testing/usr/share/calc
#     ... etc ...		/var/tmp/testing/...
#
# If ${T} is empty, calc is installed under /, which is the same
# top of tree for which it was built.  If ${T} is non-empty, then
# calc is installed under ${T}, as if one had to chroot under
# ${T} for calc to operate.
#
# If in doubt, use T=
#
T=

# Makefile debug
#
# Q=@	do not echo internal makefile actions (quiet mode)
# Q=	echo internal makefile actions (debug / verbose mode)
#
#Q=
Q=@

# standard tools
#
CHMOD= chmod
SED= sed
SORT= sort
FMT= fmt
CMP= cmp
MKDIR= mkdir
RMDIR= rmdir
RM= rm
TOUCH= touch
MV= mv
CP= cp
CO= co
TRUE= true

# The ${SCRIPT} list is the list of calc shell script files (without the .calc
# extension) which will be installed.
#
# The ${SCRIPT_SRC} is built from ${SCRIPT} and has the .calc extensions.
#
# This list is produced by the detaillist rule when no WARNINGS are detected.
# To add a script:
#
#	1) Name the file with a .calc filename extension
#	2) Place that file under RCS control
#	3) Add the name, without the .calc extension to the ${SCRIPT} below
#	4) Write out this Makefile
#	5) Replace the ${SCRIPT} and ${SCRIPT_SRC} lines with the output of:
#
#		make detaillist
#
SCRIPT= 4dsphere fproduct mersenne piforever plus powerterm \
	simple square

SCRIPT_SRC= 4dsphere.calc fproduct.calc mersenne.calc \
	piforever.calc plus.calc powerterm.calc simple.calc square.calc

# These files are found (but not built) in the distribution
#
DISTLIST= ${SCRIPT_SRC} ${MAKE_FILE} README.src

# These files are used to make (but not build) a calc .a library
#
CALCLIBLIST=

# complete list of targets
#
# NOTE: This list MUST be coordinated with the ${CSCRIPT_TARGETS} variable
#	in the upper level ../Makefile
#
CSCRIPT_TARGETS= ${SCRIPT}
TARGETS= ${CSCRIPT_TARGETS} README

# The reason for this Makefile
#
all: ${TARGETS} .all

README: README.src
	@${RM} -f $@
	@${SED} -e "s:#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@

# used by the upper level Makefile to determine if we have done all
#
# NOTE: Due to bogus shells found on one common system we must have
#	a non-empty else clause for every if condition.  *sigh*
#
.all:
	${RM} -f .all
	${TOUCH} .all

##
#
# File list generation.	 You can ignore this section.
#
#
# We will form the names of source files as if they were in a
# sub-directory called calc/cscript.
#
##

distlist: ${DISTLIST}
	${Q} for i in ${DISTLIST} /dev/null; do \
	    if [ X"$$i" != X"/dev/null" ]; then \
		echo cscript/$$i; \
	    fi; \
	done | LANG=C ${SORT}

distdir:
	${Q} echo cscript

calcliblist:

# These next rule help me form the ${SCRIPT} and ${SCRIPT_SRC} makefile
# variables above.
#
detaillist:
	${Q} -(echo "xxxxxxx"; \
	   for i in ${SCRIPT} /dev/null; do \
	    if [ X"$$i" != X"/dev/null" ]; then \
		if [ ! -f RCS/$$i.calc,v ]; then \
		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
		else \
		    echo $$i; \
		fi; \
	    fi; \
	done | LANG=C ${SORT}) | ${FMT} -70 | \
	    ${SED} -e '1s/xxxxxxx/SCRIPT=/' -e '2,$$s/^/	/' \
		   -e 's/$$/ \\/' -e '$$s/ \\$$//'
	${Q} echo
	${Q} -(echo "xxxxxxxxxxx"; \
	    for i in ${SCRIPT} /dev/null; do \
	    if [ X"$$i" != X"/dev/null" ]; then \
		if [ ! -f RCS/$$i.calc,v ]; then \
		    echo "WARNING: $$i.calc not under RCS control" 1>&2; \
		else \
		    echo $$i.calc; \
		fi; \
	    fi; \
	done | LANG=C ${SORT}) | ${FMT} -70 | \
	    ${SED} -e '1s/xxxxxxxxxxx/SCRIPT_SRC=/' -e '2,$$s/^/	/' \
		   -e 's/$$/ \\/' -e '$$s/ \\$$//'

##
#
# Home grown make dependency rules.  Your system make not support
# or have the needed tools.  You can ignore this section.
#
# We will form a skelaton tree of *.c files containing only #include "foo.h"
# lines and .h files containing the same lines surrounded by multiple include
# prevention lines.  This allows us to build a static depend list that will
# satisfy all possible cpp symbol definition combinations.
#
##

depend:
	${Q} if [ -f Makefile.bak ]; then \
	    echo "Makefile.bak exists, remove or move it out of the way"; \
	    exit 1; \
	else \
	    ${TRUE}; \
	fi
	-${Q} ${RM} -f makedep.out
	${Q} echo forming cscript dependency list
	${Q} echo "# DO NOT DELETE THIS LINE -- make depend depends on it." > \
		makedep.out
	${Q} echo "" >> makedep.out
	${Q} for i in ${SCRIPT} /dev/null; do \
	    if [ X"$$i" != X"/dev/null" ]; then \
		echo "$$i: $$i.calc"; \
		echo '	@$${RM} -f $$@'; \
		echo '	@$${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!$${BINDIR}/calc:" $$?>$$@'; \
		echo '	@$${CHMOD} +x $$@'; \
	    fi; \
	done >> makedep.out
	${Q} echo sample dependency list formed
	${Q} echo forming new cscript/Makefile
	-${Q} ${RM} -f Makefile.bak
	${Q} ${MV} Makefile Makefile.bak
	${Q} ${SED} -n '1,/^# DO NOT DELETE THIS LINE/p' Makefile.bak > Makefile
	${Q} echo "" >> Makefile
	${Q} ${SED} -n '3,$$p' makedep.out >> Makefile
	-${Q} ${RM} -f makedep.out
	-${Q} if ${CMP} -s Makefile.bak Makefile; then \
	    echo 'sample Makefile was already up to date'; \
	    ${MV} -f Makefile.bak Makefile; \
	else \
	    ${RM} -f Makefile.tmp; \
	    ${MV} Makefile Makefile.tmp; \
	    if [ -d RCS ]; then \
		${CO} -l Makefile; \
	    fi; \
	    ${MV} Makefile.tmp Makefile; \
	    if [ -d RCS ]; then \
		echo new sample Makefile formed, you need to check it in; \
	    fi; \
	fi

##
#
# rpm rules
#
##

echo_inst_files:
	${Q} for i in ${SCRIPT} /dev/null; do \
	    if [ X"$$i" != X"/dev/null" ]; then \
		echo __file__ ${SCRIPTDIR}/$$i; \
	    fi; \
	done

##
#
# Utility rules
#
##

clean:
	-${RM} -f makedep.out

clobber:
	-${RM} -f ${TARGETS}

# install everything
#
# NOTE: Keep the uninstall rule in reverse order to the install rule
#
install: all
	-${Q} if [ ! -d ${T}${BINDIR} ]; then \
	    echo ${MKDIR} ${T}${BINDIR}; \
	    ${MKDIR} ${T}${BINDIR}; \
	    if [ ! -d "${T}${BINDIR}" ]; then \
		echo ${MKDIR} -p "${T}${BINDIR}"; \
		${MKDIR} -p "${T}${BINDIR}"; \
	    fi; \
	    echo ${CHMOD} 0755 ${T}${BINDIR}; \
	    ${CHMOD} 0755 ${T}${BINDIR}; \
	else \
	    ${TRUE}; \
	fi
	-${Q} if [ ! -d ${T}${SCRIPTDIR} ]; then \
	    echo ${MKDIR} ${T}${SCRIPTDIR}; \
	    ${MKDIR} ${T}${SCRIPTDIR}; \
	    if [ ! -d "${T}${SCRIPTDIR}" ]; then \
		echo ${MKDIR} -p "${T}${SCRIPTDIR}"; \
		${MKDIR} -p "${T}${SCRIPTDIR}"; \
	    fi; \
	    echo ${CHMOD} 0755 ${T}${SCRIPTDIR}; \
	    ${CHMOD} 0755 ${T}${SCRIPTDIR}; \
	else \
	    ${TRUE}; \
	fi
	${Q} for i in ${SCRIPT} /dev/null; do \
	    if [ "$$i" = "/dev/null" ]; then \
		continue; \
	    fi; \
	    if ${CMP} -s $$i ${T}${SCRIPTDIR}/$$i; then \
		${TRUE}; \
	    else \
		${RM} -f ${T}${SCRIPTDIR}/$$i.new; \
		${CP} -f $$i ${T}${SCRIPTDIR}/$$i.new; \
		${CHMOD} 0555 ${T}${SCRIPTDIR}/$$i.new; \
		${MV} -f ${T}${SCRIPTDIR}/$$i.new ${T}${SCRIPTDIR}/$$i; \
		echo "installed ${T}${SCRIPTDIR}/$$i"; \
	    fi; \
	done

# Try to remove everything that was installed
#
# NOTE: Keep the uninstall rule in reverse order to the install rule
#
uninstall:
	-${Q} for i in ${SCRIPT} /dev/null; do \
	    if [ "$$i" = "/dev/null" ]; then \
		continue; \
	    fi; \
	    if [ -f "${T}${SCRIPTDIR}/$$i" ]; then \
	    	${RM} -f "${T}${SCRIPTDIR}/$$i"; \
		if [ -f "${T}${SCRIPTDIR}/$$i" ]; then \
		   echo "cannot uninstall ${T}${SCRIPTDIR}/$$i"; \
		else \
		   echo "uninstalled ${T}${SCRIPTDIR}/$$i"; \
		fi; \
	    fi; \
	done
	-${Q} for i in ${SCRIPTDIR} ${BINDIR}; do \
	    if [ -d "${T}$$i" ]; then \
		${RMDIR} "${T}$$i" 2>/dev/null; \
		echo "cleaned up ${T}$$i"; \
	    fi; \
	done

# DO NOT DELETE THIS LINE -- make depend depends on it.

4dsphere: 4dsphere.calc
	@${RM} -f $@
	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
	@${CHMOD} +x $@
fproduct: fproduct.calc
	@${RM} -f $@
	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
	@${CHMOD} +x $@
mersenne: mersenne.calc
	@${RM} -f $@
	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
	@${CHMOD} +x $@
piforever: piforever.calc
	@${RM} -f $@
	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
	@${CHMOD} +x $@
plus: plus.calc
	@${RM} -f $@
	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
	@${CHMOD} +x $@
powerterm: powerterm.calc
	@${RM} -f $@
	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
	@${CHMOD} +x $@
simple: simple.calc
	@${RM} -f $@
	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
	@${CHMOD} +x $@
square: square.calc
	@${RM} -f $@
	@${SED} -e "1s:^#!/usr/local/src/cmd/calc/calc:#!${BINDIR}/calc:" $?>$@
	@${CHMOD} +x $@