servosimples2.lst

Code ASM for PIC16F628. Use for CNC/Servo Motor. With simulatio in Proteus (7.0)

MPASM  5.03                 SERVOSIMPLES2.ASM   4-8-2008  15:16:13         PAGE  1


LOC  OBJECT CODE     LINE SOURCE TEXT
  VALUE

Warning[205]: Found directive in column 1. (title)
                      00001 title  "PWMOut - Output a PWM Analog Voltage"
                      00002 ;
                      00003 ;  This Application simply Outputs an Analog Voltage by Driving a 
                      00004 ;   Resistor/Capacitor ("RC") Network with a PWM signal.  
                      00005 ;
                      00006 ;  The PWM runs at 20 kHz, with a Duty Cycle range from 0 to 100% 
                      00007 ;   Demonstrated.
                      00008 ;  This is an Actual PWM Duty Cycle Range of 0 to 50 Instructions/usecs
                      00009 ;
                      00010 ;  Hardware Notes:
                      00011 ;   This application runs on a 16F84 executing at 4 MHz
                      00012 ;   _MCLR is tied through a 4.7K Resistor to Vcc and PWRT is Enabled
                      00013 ;   A 10K Resistor/0.1 uF Capacitor Network is connected to RA0 to Show 
                      00014 ;    the PWM in Operation
                      00015 ;
                      00016 ;  Myke Predko
                      00017 ;  99.12.27
                      00018 ;
                      00019 ;  LIST R=DEC
                      00020 ; ifdef __16F84
                      00021 ;  INCLUDE "p16f84.inc"
                      00022 ; else;
                      00023 ; ifdef __16F877
                      00024 ;  INCLUDE 損16f877.inc