f2812_init.c

TI的2812控制交通灯

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP2;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT2.6
interrupt void T1UFINT_ISR(void)   // EV-A
{
  // Insert ISR Code here

   
  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP2;
  
  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT2.7
interrupt void T1OFINT_ISR(void)   // EV-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP2;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}
      
      
// INT2.8 - Reserved

// -----------------------------------------------------------
// PIE Group 3 - MUXed into CPU INT3
// -----------------------------------------------------------
   
// INT 3.1         
interrupt void T2PINT_ISR(void)     // EV-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT3.2
interrupt void T2CINT_ISR(void)     // EV-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT3.3
interrupt void T2UFINT_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT3.4
interrupt void T2OFINT_ISR(void)    // EV-A
{
  // Insert ISR Code here
  
  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;  

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT3.5
interrupt void CAPINT1_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;  

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT3.6
interrupt void CAPINT2_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT3.7
interrupt void CAPINT3_ISR(void)    // EV-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP3;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}
      
// INT3.8 - Reserved


// -----------------------------------------------------------
// PIE Group 4 - MUXed into CPU INT4
// -----------------------------------------------------------

// INT 4.1
interrupt void CMP4INT_ISR(void)    // EV-B
{
  // Insert ISR Code here
  
  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;  

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT4.2
interrupt void CMP5INT_ISR(void)    // EV-B
{
  // Insert ISR Code here
  
  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT4.3
interrupt void CMP6INT_ISR(void)    // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;
  
  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT4.4
interrupt void T3PINT_ISR(void)     // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT4.5
interrupt void T3CINT_ISR(void)     // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT4.6
interrupt void T3UFINT_ISR(void)    // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT4.7
interrupt void T3OFINT_ISR(void)    // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP4;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}
     
// INT4.8 -- Reserved

// -----------------------------------------------------------
// PIE Group 5 - MUXed into CPU INT5
// -----------------------------------------------------------

// INT 5.1
interrupt void T4PINT_ISR(void)    // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT5.2
interrupt void T4CINT_ISR(void)    // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;
 
  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT5.3
interrupt void T4UFINT_ISR(void)   // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;
  
  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT5.4
interrupt void T4OFINT_ISR(void)   // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT5.5
interrupt void CAPINT4_ISR(void)   // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT5.6
interrupt void CAPINT5_ISR(void)   // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT5.7
interrupt void CAPINT6_ISR(void)   // EV-B
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP5;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}


// INT5.8 - Reserved

// -----------------------------------------------------------
// PIE Group 6 - MUXed into CPU INT6
// -----------------------------------------------------------

// INT6.1
interrupt void SPIRXINTA_ISR(void)    // SPI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT6.2
interrupt void SPITXINTA_ISR(void)     // SPI-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT6.3 - Reserved
// INT6.4 - Reserved

// INT6.5
interrupt void MRINTA_ISR(void)     // McBSP-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT6.6
interrupt void MXINTA_ISR(void)     // McBSP-A
{
  // Insert ISR Code here

  // To receive more interrupts from this PIE group, acknowledge this interrupt 
  // PieCtrlRegs.PIEACK.all = PIEACK_GROUP6;

  // Next two lines for debug only to halt the processor here
  // Remove after inserting ISR Code
   asm ("      ESTOP0");
   for(;;);
}

// INT6.7 - Reserved
// INT6.8 - Reserved


// -----------------------------------------------------------
// PIE Group 7 - MUXed into CPU INT7
// -----------------------------------------------------------

// INT7.1 - Reserved
// INT7.2 - Reserved
// INT7.3 - Reserved
// INT7.4 - Reserved
// INT7.5 - Reserved
// INT7.6 - Reserved
// INT7.7 - Reserved
// INT7.8 - Reserved

// -----------------------------------------------------------
// PIE Group 8 - MUXed into CPU INT8
// -----------------------------------------------------------

// INT8.1 - Reserved
// INT8.2 - Reserved
// INT8.3 - Reserved
// INT8.4 - Reserved
// INT8.5 - Reserved
// INT8.6 - Reserved
// INT8.7 - Reserved
// INT8.8 - Reserved