ntiologc.h

本源码是vc环境下的usb程序

//
#define IO_ERR_MEMORY_RESOURCE_CONFLICT  ((NTSTATUS)0xC004001DL)

//
// MessageId: IO_ERR_PORT_RESOURCE_CONFLICT
//
// MessageText:
//
//  The device could not allocate one or more required resources due to conflicts
//  with other devices.  The device port setting of '%2' could not be
//  satisified due to a conflict with Driver '%3'.
//
#define IO_ERR_PORT_RESOURCE_CONFLICT    ((NTSTATUS)0xC004001EL)

//
// MessageId: IO_BAD_BLOCK_WITH_NAME
//
// MessageText:
//
//  The file %2 on device %1 contains a bad disk block.
//
#define IO_BAD_BLOCK_WITH_NAME           ((NTSTATUS)0xC004001FL)

//
// MessageId: IO_WRITE_CACHE_ENABLED
//
// MessageText:
//
//  The driver detected that the device %1 has its write cache enabled. Data corruption
//  may occur.
//
#define IO_WRITE_CACHE_ENABLED           ((NTSTATUS)0x80040020L)

//
// MessageId: IO_RECOVERED_VIA_ECC
//
// MessageText:
//
//  Data was recovered using error correction code on device %1.
//
#define IO_RECOVERED_VIA_ECC             ((NTSTATUS)0x80040021L)

//
// MessageId: IO_WRITE_CACHE_DISABLED
//
// MessageText:
//
//  The driver disabled the write cache on device %1.
//
#define IO_WRITE_CACHE_DISABLED          ((NTSTATUS)0x80040022L)

//
// MessageId: IO_FILE_QUOTA_THRESHOLD
//
// MessageText:
//
//  A user hit their quota threshold on volume %2.
//
#define IO_FILE_QUOTA_THRESHOLD          ((NTSTATUS)0x40040024L)

//
// MessageId: IO_FILE_QUOTA_LIMIT
//
// MessageText:
//
//  A user hit their quota limit on volume %2.
//
#define IO_FILE_QUOTA_LIMIT              ((NTSTATUS)0x40040025L)

//
// MessageId: IO_FILE_QUOTA_STARTED
//
// MessageText:
//
//  The system has started rebuilding the user disk quota information on
//  device %1 with label "%2".
//
#define IO_FILE_QUOTA_STARTED            ((NTSTATUS)0x40040026L)

//
// MessageId: IO_FILE_QUOTA_SUCCEEDED
//
// MessageText:
//
//  The system has successfully rebuilt the user disk quota information on
//  device %1 with label "%2".
//
#define IO_FILE_QUOTA_SUCCEEDED          ((NTSTATUS)0x40040027L)

//
// MessageId: IO_FILE_QUOTA_FAILED
//
// MessageText:
//
//  The system has encounted an error rebuilding the user disk quota
//  information on device %1 with label "%2".
//
#define IO_FILE_QUOTA_FAILED             ((NTSTATUS)0x80040028L)

//
// MessageId: IO_FILE_SYSTEM_CORRUPT
//
// MessageText:
//
//  The file system structure on the disk is corrupt and unusable.
//  Please run the chkdsk utility on the device %1 with label "%2".
//
#define IO_FILE_SYSTEM_CORRUPT           ((NTSTATUS)0xC0040029L)

//
// MessageId: IO_FILE_QUOTA_CORRUPT
//
// MessageText:
//
//  The user disk quota information is unusable.
//  To ensure accuracy, the file system quota information on the device %1 with label "%2" will
//  be rebuilt.
//
#define IO_FILE_QUOTA_CORRUPT            ((NTSTATUS)0xC004002AL)

//
// MessageId: IO_SYSTEM_SLEEP_FAILED
//
// MessageText:
//
//  The system sleep operation failed
//
#define IO_SYSTEM_SLEEP_FAILED           ((NTSTATUS)0xC004002BL)

//
// MessageId: IO_DUMP_POINTER_FAILURE
//
// MessageText:
//
//  The system could not get file retrieval pointers for the dump file.
//
#define IO_DUMP_POINTER_FAILURE          ((NTSTATUS)0xC004002CL)

//
// MessageId: IO_DUMP_DRIVER_LOAD_FAILURE
//
// MessageText:
//
//  The system could not sucessfully load the crash dump driver.
//
#define IO_DUMP_DRIVER_LOAD_FAILURE      ((NTSTATUS)0xC004002DL)

//
// MessageId: IO_DUMP_INITIALIZATION_FAILURE
//
// MessageText:
//
//  Crash dump initialization failed!
//
#define IO_DUMP_INITIALIZATION_FAILURE   ((NTSTATUS)0xC004002EL)

//
// MessageId: IO_DUMP_DUMPFILE_CONFLICT
//
// MessageText:
//
//  A valid crash dump was found in the paging file while trying to configure
//  a direct dump. Direct dump is disabled! This occurs when the direct dump
//  option is set in the registry but a stop error occured before configuration
//  completed
//
#define IO_DUMP_DUMPFILE_CONFLICT        ((NTSTATUS)0xC004002FL)

//
// MessageId: IO_DUMP_DIRECT_CONFIG_FAILED
//
// MessageText:
//
//  Direct dump configuration failed. Validate the filename and make sure the target device
//  is not a Fault Tolerant set member, remote, or floppy device. The failure may
//  be because there is not enough room on the dump device to create the dump file.
//
#define IO_DUMP_DIRECT_CONFIG_FAILED     ((NTSTATUS)0xC0040030L)

//
// MessageId: IO_DUMP_PAGE_CONFIG_FAILED
//
// MessageText:
//
//  Configuring the Page file for crash dump failed. Make sure there is a page
//  file on the boot partition and that is large enough to contain all physical
//  memory.
//
#define IO_DUMP_PAGE_CONFIG_FAILED       ((NTSTATUS)0xC0040031L)

//
// MessageId: IO_LOST_DELAYED_WRITE
//
// MessageText:
//
//  {Delayed Write Failed}
//  Windows was unable to save all the data for the file %1. The data has been lost.
//  This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere.
//
#define IO_LOST_DELAYED_WRITE            ((NTSTATUS)0x80040032L)

//
// MessageId: IO_WARNING_PAGING_FAILURE
//
// MessageText:
//
//  An error was detected on device %1 during a paging operation.
//
#define IO_WARNING_PAGING_FAILURE        ((NTSTATUS)0x80040033L)

//
// MessageId: IO_WRN_FAILURE_PREDICTED
//
// MessageText:
//
//  The driver has detected that device %1 has predicted that it will fail. 
//  Immediately back up your data and replace your hard disk drive. A failure 
//  may be imminent.
//
#define IO_WRN_FAILURE_PREDICTED         ((NTSTATUS)0x80040034L)

//
// MessageId: IO_WARNING_INTERRUPT_STILL_PENDING
//
// MessageText:
//
//  A pending interrupt was detected on device %1 during a timeout operation.  A
//  large number of these warnings may indicate that the system is not correctly 
//  receiving or processing interrupts from the device.
//
#define IO_WARNING_INTERRUPT_STILL_PENDING ((NTSTATUS)0x80040035L)

//
// MessageId: IO_DRIVER_CANCEL_TIMEOUT
//
// MessageText:
//
//  An Io Request to the device %1 did not complete or canceled within the
//  specific timeout. This can occur if the device driver does not set a 
//  cancel routine for a given IO request packet.
//
#define IO_DRIVER_CANCEL_TIMEOUT         ((NTSTATUS)0x80040036L)

//
// MessageId: IO_FILE_SYSTEM_CORRUPT_WITH_NAME
//
// MessageText:
//
//  The file system structure on the disk is corrupt and unusable.
//  Please run the chkdsk utility on the volume %2.
//
#define IO_FILE_SYSTEM_CORRUPT_WITH_NAME ((NTSTATUS)0xC0040037L)

//
// MessageId: IO_WARNING_ALLOCATION_FAILED
//
// MessageText:
//
//  The driver failed to allocate memory. 
//
#define IO_WARNING_ALLOCATION_FAILED     ((NTSTATUS)0x80040038L)

//
// MessageId: IO_WARNING_LOG_FLUSH_FAILED
//
// MessageText:
//
//  The system failed to flush data to the transaction log. Corruption may occur.
//
#define IO_WARNING_LOG_FLUSH_FAILED      ((NTSTATUS)0x80040039L)

//
// MessageId: IO_WARNING_DUPLICATE_SIGNATURE
//
// MessageText:
//
//  Changing the disk signature of disk %2 because it is equal to the disk
//  signature of disk %3.
//
#define IO_WARNING_DUPLICATE_SIGNATURE   ((NTSTATUS)0x8004003AL)

//
// MessageId: IO_WARNING_DUPLICATE_PATH
//
// MessageText:
//
//  Disk %2 will not be used because it is a redundant path for disk %3.
//
#define IO_WARNING_DUPLICATE_PATH        ((NTSTATUS)0x8004003BL)

//
// MessageId: MCA_WARNING_CACHE
//
// MessageText:
//
//  Machine Check Event reported is a corrected level %3 Cache error reported to CPU %1. %2 additional error(s) are contained within the record.
//
#define MCA_WARNING_CACHE                ((NTSTATUS)0x8005003CL)

//
// MessageId: MCA_ERROR_CACHE
//
// MessageText:
//
//  Machine Check Event reported is a fatal level %3 Cache error reported to CPU %1. %2 additional error(s) are contained within the record.
//
#define MCA_ERROR_CACHE                  ((NTSTATUS)0xC005003DL)

//
// MessageId: MCA_WARNING_TLB
//
// MessageText:
//
//  Machine Check Event reported is a corrected level %3 translation Buffer error reported to CPU %1. %2 additional error(s) are contained within the record.
//
#define MCA_WARNING_TLB                  ((NTSTATUS)0x8005003EL)

//
// MessageId: MCA_ERROR_TLB
//
// MessageText:
//
//  Machine Check Event reported is a fatal level %3 translation Buffer error reported to CPU %1. %2 additional error(s) are contained within the record.
//
#define MCA_ERROR_TLB                    ((NTSTATUS)0xC005003FL)

//
// MessageId: MCA_WARNING_CPU_BUS
//
// MessageText:
//
//  Machine Check Event reported is a corrected External/Internal bus error reported to CPU %1. %2 additional error(s) are contained within the record.
//
#define MCA_WARNING_CPU_BUS              ((NTSTATUS)0x80050040L)

//
// MessageId: MCA_ERROR_CPU_BUS
//
// MessageText:
//
//  Machine Check Event reported is a fatal External/Internal bus error reported to CPU %1. %2 additional error(s) are contained within the record.
//
#define MCA_ERROR_CPU_BUS                ((NTSTATUS)0xC0050041L)

//
// MessageId: MCA_WARNING_REGISTER_FILE
//
// MessageText:
//
//  Machine Check Event reported is a corrected internal CPU register access error reported to CPU %1. %2 additional error(s) are contained within the record.
//
#define MCA_WARNING_REGISTER_FILE        ((NTSTATUS)0x80050042L)

//
// MessageId: MCA_ERROR_REGISTER_FILE
//
// MessageText:
//
//  Machine Check Event reported is a fatal internal CPU register access error reported to CPU %1. %2 additional error(s) are contained within the record.
//
#define MCA_ERROR_REGISTER_FILE          ((NTSTATUS)0xC0050043L)

//
// MessageId: MCA_WARNING_MAS
//
// MessageText:
//
//  Machine Check Event reported is a corrected Micro Architecture Structure error reported to CPU %1. %2 additional error(s) are contained within the record.
//