📄 mmddk.h
字号:
DWORD_PTR dnDevNode; // if device is PnP
} MIXEROPENDESC, *PMIXEROPENDESC, FAR *LPMIXEROPENDESC;
//
//
//
//
#define MXDM_INIT 100
#define MXDM_USER DRV_USER
#define MXDM_BASE (1)
#define MXDM_GETNUMDEVS (MXDM_BASE + 0)
#define MXDM_GETDEVCAPS (MXDM_BASE + 1)
#define MXDM_OPEN (MXDM_BASE + 2)
#define MXDM_CLOSE (MXDM_BASE + 3)
#define MXDM_GETLINEINFO (MXDM_BASE + 4)
#define MXDM_GETLINECONTROLS (MXDM_BASE + 5)
#define MXDM_GETCONTROLDETAILS (MXDM_BASE + 6)
#define MXDM_SETCONTROLDETAILS (MXDM_BASE + 7)
#endif // MMNOMIXERDEV
// #endif /* ifdef WINVER >= 0x030B */
#if !defined(MMNOTIMERDEV)
/****************************************************************************
Timer device driver support
****************************************************************************/
typedef struct timerevent_tag {
WORD wDelay; // delay required
WORD wResolution; // resolution required
LPTIMECALLBACK lpFunction; // ptr to callback function
DWORD dwUser; // user DWORD
WORD wFlags; // defines how to program event
WORD wReserved1; // structure packing
} TIMEREVENT;
typedef TIMEREVENT FAR *LPTIMEREVENT;
// messages sent to tddMessage() function
#define TDD_KILLTIMEREVENT (DRV_RESERVED+0) // indices into a table of
#define TDD_SETTIMEREVENT (DRV_RESERVED+4) // functions; thus offset by
#define TDD_GETSYSTEMTIME (DRV_RESERVED+8) // four each time...
#define TDD_GETDEVCAPS (DRV_RESERVED+12) // room for future expansion
#define TDD_BEGINMINPERIOD (DRV_RESERVED+16) // room for future expansion
#define TDD_ENDMINPERIOD (DRV_RESERVED+20) // room for future expansion
#endif // ifndef MMNOTIMERDEV
#ifndef MMNOJOYDEV
/****************************************************************************
Joystick device driver support
****************************************************************************/
/* RegisterWindowMessage with this to get msg id of config changes */
#define JOY_CONFIGCHANGED_MSGSTRING "MSJSTICK_VJOYD_MSGSTR"
/* pre-defined joystick types */
#define JOY_HW_NONE 0
#define JOY_HW_CUSTOM 1
#define JOY_HW_2A_2B_GENERIC 2
#define JOY_HW_2A_4B_GENERIC 3
#define JOY_HW_2B_GAMEPAD 4
#define JOY_HW_2B_FLIGHTYOKE 5
#define JOY_HW_2B_FLIGHTYOKETHROTTLE 6
#define JOY_HW_3A_2B_GENERIC 7
#define JOY_HW_3A_4B_GENERIC 8
#define JOY_HW_4B_GAMEPAD 9
#define JOY_HW_4B_FLIGHTYOKE 10
#define JOY_HW_4B_FLIGHTYOKETHROTTLE 11
#define JOY_HW_LASTENTRY 12
/* calibration flags */
#define JOY_ISCAL_XY 0x00000001l /* XY are calibrated */
#define JOY_ISCAL_Z 0x00000002l /* Z is calibrated */
#define JOY_ISCAL_R 0x00000004l /* R is calibrated */
#define JOY_ISCAL_U 0x00000008l /* U is calibrated */
#define JOY_ISCAL_V 0x00000010l /* V is calibrated */
#define JOY_ISCAL_POV 0x00000020l /* POV is calibrated */
/* point of view constants */
#define JOY_POV_NUMDIRS 4
#define JOY_POVVAL_FORWARD 0
#define JOY_POVVAL_BACKWARD 1
#define JOY_POVVAL_LEFT 2
#define JOY_POVVAL_RIGHT 3
/* Specific settings for joystick hardware */
#define JOY_HWS_HASZ 0x00000001l /* has Z info? */
#define JOY_HWS_HASPOV 0x00000002l /* point of view hat present */
#define JOY_HWS_POVISBUTTONCOMBOS 0x00000004l /* pov done through combo of buttons */
#define JOY_HWS_POVISPOLL 0x00000008l /* pov done through polling */
#define JOY_HWS_ISYOKE 0x00000010l /* joystick is a flight yoke */
#define JOY_HWS_ISGAMEPAD 0x00000020l /* joystick is a game pad */
#define JOY_HWS_ISCARCTRL 0x00000040l /* joystick is a car controller */
/* X defaults to J1 X axis */
#define JOY_HWS_XISJ1Y 0x00000080l /* X is on J1 Y axis */
#define JOY_HWS_XISJ2X 0x00000100l /* X is on J2 X axis */
#define JOY_HWS_XISJ2Y 0x00000200l /* X is on J2 Y axis */
/* Y defaults to J1 Y axis */
#define JOY_HWS_YISJ1X 0x00000400l /* Y is on J1 X axis */
#define JOY_HWS_YISJ2X 0x00000800l /* Y is on J2 X axis */
#define JOY_HWS_YISJ2Y 0x00001000l /* Y is on J2 Y axis */
/* Z defaults to J2 Y axis */
#define JOY_HWS_ZISJ1X 0x00002000l /* Z is on J1 X axis */
#define JOY_HWS_ZISJ1Y 0x00004000l /* Z is on J1 Y axis */
#define JOY_HWS_ZISJ2X 0x00008000l /* Z is on J2 X axis */
/* POV defaults to J2 Y axis, if it is not button based */
#define JOY_HWS_POVISJ1X 0x00010000l /* pov done through J1 X axis */
#define JOY_HWS_POVISJ1Y 0x00020000l /* pov done through J1 Y axis */
#define JOY_HWS_POVISJ2X 0x00040000l /* pov done through J2 X axis */
/* R defaults to J2 X axis */
#define JOY_HWS_HASR 0x00080000l /* has R (4th axis) info */
#define JOY_HWS_RISJ1X 0x00100000l /* R done through J1 X axis */
#define JOY_HWS_RISJ1Y 0x00200000l /* R done through J1 Y axis */
#define JOY_HWS_RISJ2Y 0x00400000l /* R done through J2 X axis */
/* U & V for future hardware */
#define JOY_HWS_HASU 0x00800000l /* has U (5th axis) info */
#define JOY_HWS_HASV 0x01000000l /* has V (6th axis) info */
/* Usage settings */
#define JOY_US_HASRUDDER 0x00000001l /* joystick configured with rudder */
#define JOY_US_PRESENT 0x00000002l /* is joystick actually present? */
#define JOY_US_ISOEM 0x00000004l /* joystick is an OEM defined type */
/* struct for storing x,y, z, and rudder values */
typedef struct joypos_tag {
DWORD dwX;
DWORD dwY;
DWORD dwZ;
DWORD dwR;
DWORD dwU;
DWORD dwV;
} JOYPOS, FAR *LPJOYPOS;
/* struct for storing ranges */
typedef struct joyrange_tag {
JOYPOS jpMin;
JOYPOS jpMax;
JOYPOS jpCenter;
} JOYRANGE,FAR *LPJOYRANGE;
typedef struct joyreguservalues_tag {
DWORD dwTimeOut; /* value at which to timeout joystick polling */
JOYRANGE jrvRanges; /* range of values app wants returned for axes */
JOYPOS jpDeadZone; /* area around center to be considered
as "dead". specified as a percentage
(0-100). Only X & Y handled by system driver */
} JOYREGUSERVALUES, FAR *LPJOYREGUSERVALUES;
typedef struct joyreghwsettings_tag {
DWORD dwFlags;
DWORD dwNumButtons; /* number of buttons */
} JOYREGHWSETTINGS, FAR *LPJOYHWSETTINGS;
/* range of values returned by the hardware (filled in by calibration) */
typedef struct joyreghwvalues_tag {
JOYRANGE jrvHardware; /* values returned by hardware */
DWORD dwPOVValues[JOY_POV_NUMDIRS];/* POV values returned by hardware */
DWORD dwCalFlags; /* what has been calibrated */
} JOYREGHWVALUES, FAR *LPJOYREGHWVALUES;
/* hardware configuration */
typedef struct joyreghwconfig_tag {
JOYREGHWSETTINGS hws; /* hardware settings */
DWORD dwUsageSettings;/* usage settings */
JOYREGHWVALUES hwv; /* values returned by hardware */
DWORD dwType; /* type of joystick */
DWORD dwReserved; /* reserved for OEM drivers */
} JOYREGHWCONFIG, FAR *LPJOYREGHWCONFIG;
// joystick calibration info structure
typedef struct joycalibrate_tag {
WORD wXbase;
WORD wXdelta;
WORD wYbase;
WORD wYdelta;
WORD wZbase;
WORD wZdelta;
} JOYCALIBRATE;
typedef JOYCALIBRATE FAR *LPJOYCALIBRATE;
// prototype for joystick message function
typedef DWORD (JOYDEVMSGPROC)(DWORD, UINT, LONG, LONG);
typedef JOYDEVMSGPROC FAR *LPJOYDEVMSGPROC;
// messages sent to joystick driver's DriverProc() function
#define JDD_GETNUMDEVS (DRV_RESERVED + 0x0001)
#define JDD_GETDEVCAPS (DRV_RESERVED + 0x0002)
#define JDD_GETPOS (DRV_RESERVED + 0x0101)
#define JDD_SETCALIBRATION (DRV_RESERVED + 0x0102)
#define JDD_CONFIGCHANGED (DRV_RESERVED + 0x0103)
#define JDD_GETPOSEX (DRV_RESERVED + 0x0104)
#endif // ifndef MMNOJOYDEV
#ifndef MAKELRESULT
#define MAKELRESULT(low, high) ((LRESULT)MAKELONG(low, high))
#endif//MAKELRESULT
#ifndef MMNOMCIDEV
/****************************************************************************
MCI device driver support
****************************************************************************/
// internal MCI messages
#define MCI_OPEN_DRIVER 0x0801
#define MCI_CLOSE_DRIVER 0x0802
#define MAKEMCIRESOURCE(wRet, wRes) MAKELRESULT((wRet), (wRes))
// string return values only used with MAKEMCIRESOURCE
#define MCI_FALSE (MCI_STRING_OFFSET + 19)
#define MCI_TRUE (MCI_STRING_OFFSET + 20)
// resource string return values
#define MCI_FORMAT_RETURN_BASE MCI_FORMAT_MILLISECONDS_S
#define MCI_FORMAT_MILLISECONDS_S (MCI_STRING_OFFSET + 21)
#define MCI_FORMAT_HMS_S (MCI_STRING_OFFSET + 22)
#define MCI_FORMAT_MSF_S (MCI_STRING_OFFSET + 23)
#define MCI_FORMAT_FRAMES_S (MCI_STRING_OFFSET + 24)
#define MCI_FORMAT_SMPTE_24_S (MCI_STRING_OFFSET + 25)
#define MCI_FORMAT_SMPTE_25_S (MCI_STRING_OFFSET + 26)
#define MCI_FORMAT_SMPTE_30_S (MCI_STRING_OFFSET + 27)
#define MCI_FORMAT_SMPTE_30DROP_S (MCI_STRING_OFFSET + 28)
#define MCI_FORMAT_BYTES_S (MCI_STRING_OFFSET + 29)
#define MCI_FORMAT_SAMPLES_S (MCI_STRING_OFFSET + 30)
#define MCI_FORMAT_TMSF_S (MCI_STRING_OFFSET + 31)
#define MCI_VD_FORMAT_TRACK_S (MCI_VD_OFFSET + 5)
#define WAVE_FORMAT_PCM_S (MCI_WAVE_OFFSET + 0)
#define WAVE_MAPPER_S (MCI_WAVE_OFFSET + 1)
#define MCI_SEQ_MAPPER_S (MCI_SEQ_OFFSET + 5)
#define MCI_SEQ_FILE_S (MCI_SEQ_OFFSET + 6)
#define MCI_SEQ_MIDI_S (MCI_SEQ_OFFSET + 7)
#define MCI_SEQ_SMPTE_S (MCI_SEQ_OFFSET + 8)
#define MCI_SEQ_FORMAT_SONGPTR_S (MCI_SEQ_OFFSET + 9)
#define MCI_SEQ_NONE_S (MCI_SEQ_OFFSET + 10)
#define MIDIMAPPER_S (MCI_SEQ_OFFSET + 11)
#define MCI_TABLE_NOT_PRESENT ((UINT)-1)
// parameters for internal version of MCI_OPEN message sent from
// mciOpenDevice() to the driver
typedef struct {
MCIDEVICEID wDeviceID; // device ID
LPCWSTR lpstrParams; // parameter string for entry in SYSTEM.INI
UINT wCustomCommandTable; // custom command table ((-1) if none)
// filled in by the driver
UINT wType; // driver type
// filled in by the driver
} MCI_OPEN_DRIVER_PARMS;
typedef MCI_OPEN_DRIVER_PARMS FAR * LPMCI_OPEN_DRIVER_PARMS;
// maximum length of an MCI device type
#define MCI_MAX_DEVICE_TYPE_LENGTH 80
// flags for mciSendCommandInternal() which direct mciSendString() how to
// interpret the return value
#define MCI_RESOURCE_RETURNED 0x00010000 // resource ID
#define MCI_COLONIZED3_RETURN 0x00020000 // colonized ID, 3 bytes data
#define MCI_COLONIZED4_RETURN 0x00040000 // colonized ID, 4 bytes data
#define MCI_INTEGER_RETURNED 0x00080000 // integer conversion needed
#define MCI_RESOURCE_DRIVER 0x00100000 // driver owns returned resource
// invalid command table ID
#define MCI_NO_COMMAND_TABLE ((UINT)(-1))
// command table information type tags
#define MCI_COMMAND_HEAD 0
#define MCI_STRING 1
#define MCI_INTEGER 2
#define MCI_END_COMMAND 3
#define MCI_RETURN 4
#define MCI_FLAG 5
#define MCI_END_COMMAND_LIST 6
#define MCI_RECT 7
#define MCI_CONSTANT 8
#define MCI_END_CONSTANT 9
#define MCI_HWND 10
#define MCI_HPAL 11
#define MCI_HDC 12
// function prototypes for MCI driver functions
DWORD_PTR APIENTRY mciGetDriverData(MCIDEVICEID wDeviceID);
BOOL APIENTRY mciSetDriverData(MCIDEVICEID wDeviceID, DWORD_PTR dwData);
UINT APIENTRY mciDriverYield (MCIDEVICEID wDeviceID);
BOOL APIENTRY mciDriverNotify (HANDLE hwndCallback, MCIDEVICEID wDeviceID,
UINT uStatus);
UINT APIENTRY mciLoadCommandResource(HANDLE hInstance,
LPCWSTR lpResName, UINT wType);
BOOL APIENTRY mciFreeCommandResource(UINT wTable);
#endif // ifndef MMNOMCIDEV
#ifndef MMNOTASKDEV
/*****************************************************************************
Task support
*****************************************************************************/
// error return values
#define TASKERR_NOTASKSUPPORT 1
#define TASKERR_OUTOFMEMORY 2
// task support function prototypes
typedef VOID (TASKCALLBACK) (DWORD_PTR dwInst);
typedef TASKCALLBACK FAR *LPTASKCALLBACK;
UINT APIENTRY mmTaskCreate(LPTASKCALLBACK lpfn, HANDLE FAR * lph, DWORD_PTR dwInst);
VOID APIENTRY mmTaskBlock(DWORD h);
BOOL APIENTRY mmTaskSignal(DWORD h);
VOID APIENTRY mmTaskYield(VOID);
DWORD APIENTRY mmGetCurrentTask(VOID);
#endif // endif MMNOTASKDEV
#define MMDDKINC
#ifdef __cplusplus
}
#endif /* __cplusplus */
#include "poppack.h" /* Revert to default packing */
#endif /* _INC_MMDDK */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -