winerror.h

本源码是vc环境下的usb程序

/************************************************************************
*                                                                       *
*   winerror.h --  error code definitions for the Win32 API functions   *
*                                                                       *
*   Copyright (c) Microsoft Corp.  All rights reserved.                 *
*                                                                       *
************************************************************************/

#ifndef _WINERROR_
#define _WINERROR_

#if defined (_MSC_VER) && (_MSC_VER >= 1020) && !defined(__midl)
#pragma once
#endif

//
//  Values are 32 bit values layed out as follows:
//
//   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
//   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
//  +---+-+-+-----------------------+-------------------------------+
//  |Sev|C|R|     Facility          |               Code            |
//  +---+-+-+-----------------------+-------------------------------+
//
//  where
//
//      Sev - is the severity code
//
//          00 - Success
//          01 - Informational
//          10 - Warning
//          11 - Error
//
//      C - is the Customer code flag
//
//      R - is a reserved bit
//
//      Facility - is the facility code
//
//      Code - is the facility's status code
//
//
// Define the facility codes
//
#define FACILITY_WINDOWSUPDATE           36
#define FACILITY_WINDOWS_CE              24
#define FACILITY_WINDOWS                 8
#define FACILITY_URT                     19
#define FACILITY_UMI                     22
#define FACILITY_SXS                     23
#define FACILITY_STORAGE                 3
#define FACILITY_SSPI                    9
#define FACILITY_SCARD                   16
#define FACILITY_SETUPAPI                15
#define FACILITY_SECURITY                9
#define FACILITY_RPC                     1
#define FACILITY_WIN32                   7
#define FACILITY_CONTROL                 10
#define FACILITY_NULL                    0
#define FACILITY_MSMQ                    14
#define FACILITY_MEDIASERVER             13
#define FACILITY_INTERNET                12
#define FACILITY_ITF                     4
#define FACILITY_HTTP                    25
#define FACILITY_DPLAY                   21
#define FACILITY_DISPATCH                2
#define FACILITY_CONFIGURATION           33
#define FACILITY_COMPLUS                 17
#define FACILITY_CERT                    11
#define FACILITY_BACKGROUNDCOPY          32
#define FACILITY_ACS                     20
#define FACILITY_AAF                     18


//
// Define the severity codes
//


//
// MessageId: ERROR_SUCCESS
//
// MessageText:
//
//  The operation completed successfully.
//
#define ERROR_SUCCESS                    0L

#define NO_ERROR 0L                                                 // dderror
#define SEC_E_OK                         ((HRESULT)0x00000000L)

//
// MessageId: ERROR_INVALID_FUNCTION
//
// MessageText:
//
//  Incorrect function.
//
#define ERROR_INVALID_FUNCTION           1L    // dderror

//
// MessageId: ERROR_FILE_NOT_FOUND
//
// MessageText:
//
//  The system cannot find the file specified.
//
#define ERROR_FILE_NOT_FOUND             2L

//
// MessageId: ERROR_PATH_NOT_FOUND
//
// MessageText:
//
//  The system cannot find the path specified.
//
#define ERROR_PATH_NOT_FOUND             3L

//
// MessageId: ERROR_TOO_MANY_OPEN_FILES
//
// MessageText:
//
//  The system cannot open the file.
//
#define ERROR_TOO_MANY_OPEN_FILES        4L

//
// MessageId: ERROR_ACCESS_DENIED
//
// MessageText:
//
//  Access is denied.
//
#define ERROR_ACCESS_DENIED              5L

//
// MessageId: ERROR_INVALID_HANDLE
//
// MessageText:
//
//  The handle is invalid.
//
#define ERROR_INVALID_HANDLE             6L

//
// MessageId: ERROR_ARENA_TRASHED
//
// MessageText:
//
//  The storage control blocks were destroyed.
//
#define ERROR_ARENA_TRASHED              7L

//
// MessageId: ERROR_NOT_ENOUGH_MEMORY
//
// MessageText:
//
//  Not enough storage is available to process this command.
//
#define ERROR_NOT_ENOUGH_MEMORY          8L    // dderror

//
// MessageId: ERROR_INVALID_BLOCK
//
// MessageText:
//
//  The storage control block address is invalid.
//
#define ERROR_INVALID_BLOCK              9L

//
// MessageId: ERROR_BAD_ENVIRONMENT
//
// MessageText:
//
//  The environment is incorrect.
//
#define ERROR_BAD_ENVIRONMENT            10L

//
// MessageId: ERROR_BAD_FORMAT
//
// MessageText:
//
//  An attempt was made to load a program with an incorrect format.
//
#define ERROR_BAD_FORMAT                 11L

//
// MessageId: ERROR_INVALID_ACCESS
//
// MessageText:
//
//  The access code is invalid.
//
#define ERROR_INVALID_ACCESS             12L

//
// MessageId: ERROR_INVALID_DATA
//
// MessageText:
//
//  The data is invalid.
//
#define ERROR_INVALID_DATA               13L

//
// MessageId: ERROR_OUTOFMEMORY
//
// MessageText:
//
//  Not enough storage is available to complete this operation.
//
#define ERROR_OUTOFMEMORY                14L

//
// MessageId: ERROR_INVALID_DRIVE
//
// MessageText:
//
//  The system cannot find the drive specified.
//
#define ERROR_INVALID_DRIVE              15L

//
// MessageId: ERROR_CURRENT_DIRECTORY
//
// MessageText:
//
//  The directory cannot be removed.
//
#define ERROR_CURRENT_DIRECTORY          16L

//
// MessageId: ERROR_NOT_SAME_DEVICE
//
// MessageText:
//
//  The system cannot move the file to a different disk drive.
//
#define ERROR_NOT_SAME_DEVICE            17L

//
// MessageId: ERROR_NO_MORE_FILES
//
// MessageText:
//
//  There are no more files.
//
#define ERROR_NO_MORE_FILES              18L

//
// MessageId: ERROR_WRITE_PROTECT
//
// MessageText:
//
//  The media is write protected.
//
#define ERROR_WRITE_PROTECT              19L

//
// MessageId: ERROR_BAD_UNIT
//
// MessageText:
//
//  The system cannot find the device specified.
//
#define ERROR_BAD_UNIT                   20L

//
// MessageId: ERROR_NOT_READY
//
// MessageText:
//
//  The device is not ready.
//
#define ERROR_NOT_READY                  21L

//
// MessageId: ERROR_BAD_COMMAND
//
// MessageText:
//
//  The device does not recognize the command.
//
#define ERROR_BAD_COMMAND                22L

//
// MessageId: ERROR_CRC
//
// MessageText:
//
//  Data error (cyclic redundancy check).
//
#define ERROR_CRC                        23L

//
// MessageId: ERROR_BAD_LENGTH
//
// MessageText:
//
//  The program issued a command but the command length is incorrect.
//
#define ERROR_BAD_LENGTH                 24L

//
// MessageId: ERROR_SEEK
//
// MessageText:
//
//  The drive cannot locate a specific area or track on the disk.
//
#define ERROR_SEEK                       25L

//
// MessageId: ERROR_NOT_DOS_DISK
//
// MessageText:
//
//  The specified disk or diskette cannot be accessed.
//
#define ERROR_NOT_DOS_DISK               26L

//
// MessageId: ERROR_SECTOR_NOT_FOUND
//
// MessageText:
//
//  The drive cannot find the sector requested.
//
#define ERROR_SECTOR_NOT_FOUND           27L

//
// MessageId: ERROR_OUT_OF_PAPER
//
// MessageText:
//
//  The printer is out of paper.
//
#define ERROR_OUT_OF_PAPER               28L

//
// MessageId: ERROR_WRITE_FAULT
//
// MessageText:
//
//  The system cannot write to the specified device.
//
#define ERROR_WRITE_FAULT                29L

//
// MessageId: ERROR_READ_FAULT
//
// MessageText:
//
//  The system cannot read from the specified device.
//
#define ERROR_READ_FAULT                 30L

//
// MessageId: ERROR_GEN_FAILURE
//
// MessageText:
//
//  A device attached to the system is not functioning.
//
#define ERROR_GEN_FAILURE                31L

//
// MessageId: ERROR_SHARING_VIOLATION
//
// MessageText:
//
//  The process cannot access the file because it is being used by another process.
//
#define ERROR_SHARING_VIOLATION          32L

//
// MessageId: ERROR_LOCK_VIOLATION
//
// MessageText:
//
//  The process cannot access the file because another process has locked a portion of the file.
//
#define ERROR_LOCK_VIOLATION             33L

//
// MessageId: ERROR_WRONG_DISK
//
// MessageText:
//
//  The wrong diskette is in the drive.
//  Insert %2 (Volume Serial Number: %3) into drive %1.
//
#define ERROR_WRONG_DISK                 34L

//
// MessageId: ERROR_SHARING_BUFFER_EXCEEDED
//
// MessageText:
//
//  Too many files opened for sharing.
//
#define ERROR_SHARING_BUFFER_EXCEEDED    36L

//
// MessageId: ERROR_HANDLE_EOF
//
// MessageText:
//
//  Reached the end of the file.
//
#define ERROR_HANDLE_EOF                 38L

//
// MessageId: ERROR_HANDLE_DISK_FULL
//
// MessageText:
//
//  The disk is full.
//
#define ERROR_HANDLE_DISK_FULL           39L

//
// MessageId: ERROR_NOT_SUPPORTED
//
// MessageText:
//
//  The request is not supported.
//
#define ERROR_NOT_SUPPORTED              50L

//
// MessageId: ERROR_REM_NOT_LIST
//
// MessageText:
//
//  Windows cannot find the network path. Verify that the network path is correct and the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator.
//
#define ERROR_REM_NOT_LIST               51L

//
// MessageId: ERROR_DUP_NAME
//
// MessageText:
//
//  You were not connected because a duplicate name exists on the network. Go to System in Control Panel to change the computer name and try again.
//
#define ERROR_DUP_NAME                   52L

//
// MessageId: ERROR_BAD_NETPATH
//
// MessageText:
//
//  The network path was not found.
//
#define ERROR_BAD_NETPATH                53L

//
// MessageId: ERROR_NETWORK_BUSY
//
// MessageText:
//
//  The network is busy.
//
#define ERROR_NETWORK_BUSY               54L

//
// MessageId: ERROR_DEV_NOT_EXIST
//
// MessageText:
//
//  The specified network resource or device is no longer available.
//
#define ERROR_DEV_NOT_EXIST              55L    // dderror

//
// MessageId: ERROR_TOO_MANY_CMDS
//
// MessageText:
//
//  The network BIOS command limit has been reached.
//
#define ERROR_TOO_MANY_CMDS              56L

//
// MessageId: ERROR_ADAP_HDW_ERR
//
// MessageText:
//
//  A network adapter hardware error occurred.
//
#define ERROR_ADAP_HDW_ERR               57L

//
// MessageId: ERROR_BAD_NET_RESP
//
// MessageText:
//
//  The specified server cannot perform the requested operation.
//
#define ERROR_BAD_NET_RESP               58L

//
// MessageId: ERROR_UNEXP_NET_ERR
//
// MessageText:
//
//  An unexpected network error occurred.
//
#define ERROR_UNEXP_NET_ERR              59L

//
// MessageId: ERROR_BAD_REM_ADAP
//
// MessageText:
//
//  The remote adapter is not compatible.
//
#define ERROR_BAD_REM_ADAP               60L

//
// MessageId: ERROR_PRINTQ_FULL
//
// MessageText:
//
//  The printer queue is full.
//
#define ERROR_PRINTQ_FULL                61L

//
// MessageId: ERROR_NO_SPOOL_SPACE
//
// MessageText:
//
//  Space to store the file waiting to be printed is not available on the server.
//
#define ERROR_NO_SPOOL_SPACE             62L

//
// MessageId: ERROR_PRINT_CANCELLED
//
// MessageText:
//
//  Your file waiting to be printed was deleted.
//
#define ERROR_PRINT_CANCELLED            63L

//
// MessageId: ERROR_NETNAME_DELETED
//
// MessageText:
//
//  The specified network name is no longer available.
//
#define ERROR_NETNAME_DELETED            64L

//
// MessageId: ERROR_NETWORK_ACCESS_DENIED
//
// MessageText:
//
//  Network access is denied.
//
#define ERROR_NETWORK_ACCESS_DENIED      65L

//
// MessageId: ERROR_BAD_DEV_TYPE
//
// MessageText:
//
//  The network resource type is not correct.
//
#define ERROR_BAD_DEV_TYPE               66L

//
// MessageId: ERROR_BAD_NET_NAME
//
// MessageText:
//
//  The network name cannot be found.
//
#define ERROR_BAD_NET_NAME               67L

//
// MessageId: ERROR_TOO_MANY_NAMES
//
// MessageText:
//
//  The name limit for the local computer network adapter card was exceeded.
//
#define ERROR_TOO_MANY_NAMES             68L

//
// MessageId: ERROR_TOO_MANY_SESS
//
// MessageText:
//
//  The network BIOS session limit was exceeded.
//
#define ERROR_TOO_MANY_SESS              69L

//
// MessageId: ERROR_SHARING_PAUSED
//
// MessageText:
//
//  The remote server has been paused or is in the process of being started.
//
#define ERROR_SHARING_PAUSED             70L

//
// MessageId: ERROR_REQ_NOT_ACCEP
//
// MessageText:
//
//  No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
//
#define ERROR_REQ_NOT_ACCEP              71L

//
// MessageId: ERROR_REDIR_PAUSED
//
// MessageText:
//
//  The specified printer or disk device has been paused.
//
#define ERROR_REDIR_PAUSED               72L

//
// MessageId: ERROR_FILE_EXISTS
//
// MessageText: