ntddser.h

本源码是vc环境下的usb程序

/*++ BUILD Version: 0002    // Increment this if a change has global effects

Copyright (c) Microsoft Corporation. All rights reserved.

Module Name:

    ntddser.h

Abstract:

    This is the include file that defines all constants and types for
    accessing the Serial device.

Author:

    Steve Wood (stevewo) 27-May-1990

Revision History:
    Louis J. Giliberto, Jr. (louisg) 28-Oct-97

--*/


//
// Interface GUIDs
//
// need these GUIDs outside conditional includes so that user can
//   #include <ntddser.h> in precompiled header
//   #include <initguid.h> in a single source file
//   #include <ntddser.h> in that source file a second time to instantiate the GUIDs
//
#ifdef DEFINE_GUID
//
// Make sure FAR is defined...
//
#ifndef FAR
#ifdef _WIN32
#define FAR
#else
#define FAR _far
#endif
#endif

// begin_wioctlguids
DEFINE_GUID(GUID_DEVINTERFACE_COMPORT,                0x86e0d1e0L, 0x8089, 0x11d0, 0x9c, 0xe4, 0x08, 0x00, 0x3e, 0x30, 0x1f, 0x73);
DEFINE_GUID(GUID_DEVINTERFACE_SERENUM_BUS_ENUMERATOR, 0x4D36E978L, 0xE325, 0x11CE, 0xBF, 0xC1, 0x08, 0x00, 0x2B, 0xE1, 0x03, 0x18);
// end_wioctlguids

// begin_wioctlobsoleteguids
#define GUID_CLASS_COMPORT          GUID_DEVINTERFACE_COMPORT
#define GUID_SERENUM_BUS_ENUMERATOR GUID_DEVINTERFACE_SERENUM_BUS_ENUMERATOR
// end_wioctlobsoleteguids
#endif // DEFINE_GUID

#ifndef _NTDDSER_
#define _NTDDSER_

#ifdef __cplusplus
extern "C" {
#endif

//
// NtDeviceIoControlFile IoControlCode values for this device.
//

#define IOCTL_SERIAL_SET_BAUD_RATE      CTL_CODE(FILE_DEVICE_SERIAL_PORT, 1,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_QUEUE_SIZE     CTL_CODE(FILE_DEVICE_SERIAL_PORT, 2,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_LINE_CONTROL   CTL_CODE(FILE_DEVICE_SERIAL_PORT, 3,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_BREAK_ON       CTL_CODE(FILE_DEVICE_SERIAL_PORT, 4,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_BREAK_OFF      CTL_CODE(FILE_DEVICE_SERIAL_PORT, 5,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_IMMEDIATE_CHAR     CTL_CODE(FILE_DEVICE_SERIAL_PORT, 6,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_TIMEOUTS       CTL_CODE(FILE_DEVICE_SERIAL_PORT, 7,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_TIMEOUTS       CTL_CODE(FILE_DEVICE_SERIAL_PORT, 8,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_DTR            CTL_CODE(FILE_DEVICE_SERIAL_PORT, 9,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_CLR_DTR            CTL_CODE(FILE_DEVICE_SERIAL_PORT,10,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_RESET_DEVICE       CTL_CODE(FILE_DEVICE_SERIAL_PORT,11,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_RTS            CTL_CODE(FILE_DEVICE_SERIAL_PORT,12,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_CLR_RTS            CTL_CODE(FILE_DEVICE_SERIAL_PORT,13,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_XOFF           CTL_CODE(FILE_DEVICE_SERIAL_PORT,14,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_XON            CTL_CODE(FILE_DEVICE_SERIAL_PORT,15,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_WAIT_MASK      CTL_CODE(FILE_DEVICE_SERIAL_PORT,16,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_WAIT_MASK      CTL_CODE(FILE_DEVICE_SERIAL_PORT,17,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_WAIT_ON_MASK       CTL_CODE(FILE_DEVICE_SERIAL_PORT,18,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_PURGE              CTL_CODE(FILE_DEVICE_SERIAL_PORT,19,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_BAUD_RATE      CTL_CODE(FILE_DEVICE_SERIAL_PORT,20,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_LINE_CONTROL   CTL_CODE(FILE_DEVICE_SERIAL_PORT,21,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_CHARS          CTL_CODE(FILE_DEVICE_SERIAL_PORT,22,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_CHARS          CTL_CODE(FILE_DEVICE_SERIAL_PORT,23,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_HANDFLOW       CTL_CODE(FILE_DEVICE_SERIAL_PORT,24,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_HANDFLOW       CTL_CODE(FILE_DEVICE_SERIAL_PORT,25,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_MODEMSTATUS    CTL_CODE(FILE_DEVICE_SERIAL_PORT,26,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_COMMSTATUS     CTL_CODE(FILE_DEVICE_SERIAL_PORT,27,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_XOFF_COUNTER       CTL_CODE(FILE_DEVICE_SERIAL_PORT,28,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_PROPERTIES     CTL_CODE(FILE_DEVICE_SERIAL_PORT,29,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_DTRRTS         CTL_CODE(FILE_DEVICE_SERIAL_PORT,30,METHOD_BUFFERED,FILE_ANY_ACCESS)

//
// Serenum reserves function codes between 128 and 255.  Do not use.
//

// begin_winioctl

#define IOCTL_SERIAL_LSRMST_INSERT      CTL_CODE(FILE_DEVICE_SERIAL_PORT,31,METHOD_BUFFERED,FILE_ANY_ACCESS)

#define IOCTL_SERENUM_EXPOSE_HARDWARE   CTL_CODE(FILE_DEVICE_SERENUM,128,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERENUM_REMOVE_HARDWARE   CTL_CODE(FILE_DEVICE_SERENUM,129,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERENUM_PORT_DESC         CTL_CODE(FILE_DEVICE_SERENUM,130,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERENUM_GET_PORT_NAME     CTL_CODE(FILE_DEVICE_SERENUM,131,METHOD_BUFFERED,FILE_ANY_ACCESS)

// end_winioctl

#define IOCTL_SERIAL_CONFIG_SIZE        CTL_CODE(FILE_DEVICE_SERIAL_PORT,32,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_COMMCONFIG     CTL_CODE(FILE_DEVICE_SERIAL_PORT,33,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_COMMCONFIG     CTL_CODE(FILE_DEVICE_SERIAL_PORT,34,METHOD_BUFFERED,FILE_ANY_ACCESS)

#define IOCTL_SERIAL_GET_STATS          CTL_CODE(FILE_DEVICE_SERIAL_PORT,35,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_CLEAR_STATS        CTL_CODE(FILE_DEVICE_SERIAL_PORT,36,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_GET_MODEM_CONTROL  CTL_CODE(FILE_DEVICE_SERIAL_PORT,37,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_MODEM_CONTROL  CTL_CODE(FILE_DEVICE_SERIAL_PORT,38,METHOD_BUFFERED,FILE_ANY_ACCESS)
#define IOCTL_SERIAL_SET_FIFO_CONTROL   CTL_CODE(FILE_DEVICE_SERIAL_PORT,39,METHOD_BUFFERED,FILE_ANY_ACCESS)


//
// internal serial IOCTL's
//

#define IOCTL_SERIAL_INTERNAL_DO_WAIT_WAKE      CTL_CODE(FILE_DEVICE_SERIAL_PORT, 1, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_SERIAL_INTERNAL_CANCEL_WAIT_WAKE  CTL_CODE(FILE_DEVICE_SERIAL_PORT, 2, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_SERIAL_INTERNAL_BASIC_SETTINGS    CTL_CODE(FILE_DEVICE_SERIAL_PORT, 3, METHOD_BUFFERED, FILE_ANY_ACCESS)
#define IOCTL_SERIAL_INTERNAL_RESTORE_SETTINGS  CTL_CODE(FILE_DEVICE_SERIAL_PORT, 4, METHOD_BUFFERED, FILE_ANY_ACCESS)

typedef struct _SERIALPERF_STATS {
    ULONG ReceivedCount;
    ULONG TransmittedCount;
    ULONG FrameErrorCount;
    ULONG SerialOverrunErrorCount;
    ULONG BufferOverrunErrorCount;
    ULONG ParityErrorCount;
} SERIALPERF_STATS, *PSERIALPERF_STATS;

typedef struct _SERIALCONFIG {
    ULONG Size;
    USHORT Version;
    ULONG SubType;
    ULONG ProvOffset;
    ULONG ProviderSize;
    WCHAR ProviderData[1];
} SERIALCONFIG,*PSERIALCONFIG;

//
// NtDeviceIoControlFile InputBuffer/OutputBuffer record structures for
// this device.
//

//
// This structure used to set line parameters.
//

typedef struct _SERIAL_LINE_CONTROL {
    UCHAR StopBits;
    UCHAR Parity;
    UCHAR WordLength;
    } SERIAL_LINE_CONTROL,*PSERIAL_LINE_CONTROL;

typedef struct _SERIAL_TIMEOUTS {
    ULONG ReadIntervalTimeout;
    ULONG ReadTotalTimeoutMultiplier;
    ULONG ReadTotalTimeoutConstant;
    ULONG WriteTotalTimeoutMultiplier;
    ULONG WriteTotalTimeoutConstant;
    } SERIAL_TIMEOUTS,*PSERIAL_TIMEOUTS;

//
// This structure used to resize the input/output buffers.
// An error code will be returned if the size exceeds the
// drivers capacity.  The driver reserves the right to
// allocate a larger buffer.
//

typedef struct _SERIAL_QUEUE_SIZE {
    ULONG InSize;
    ULONG OutSize;
    } SERIAL_QUEUE_SIZE,*PSERIAL_QUEUE_SIZE;


//
// This structure used by set baud rate
//

typedef struct _SERIAL_BAUD_RATE {
    ULONG BaudRate;
    } SERIAL_BAUD_RATE,*PSERIAL_BAUD_RATE;



//
// Defines the bitmask that the driver can used to notify
// app of various changes in the state of the UART.
//

#define SERIAL_EV_RXCHAR           0x0001  // Any Character received
#define SERIAL_EV_RXFLAG           0x0002  // Received certain character
#define SERIAL_EV_TXEMPTY          0x0004  // Transmitt Queue Empty
#define SERIAL_EV_CTS              0x0008  // CTS changed state
#define SERIAL_EV_DSR              0x0010  // DSR changed state
#define SERIAL_EV_RLSD             0x0020  // RLSD changed state
#define SERIAL_EV_BREAK            0x0040  // BREAK received
#define SERIAL_EV_ERR              0x0080  // Line status error occurred
#define SERIAL_EV_RING             0x0100  // Ring signal detected
#define SERIAL_EV_PERR             0x0200  // Printer error occured
#define SERIAL_EV_RX80FULL         0x0400  // Receive buffer is 80 percent full
#define SERIAL_EV_EVENT1           0x0800  // Provider specific event 1
#define SERIAL_EV_EVENT2           0x1000  // Provider specific event 2

//
// A longword is used to send down a mask that
// instructs the driver what to purge.
//
// SERIAL_PURGE_TXABORT - Implies the current and all pending writes.
// SERIAL_PURGE_RXABORT - Implies the current and all pending reads.
// SERIAL_PURGE_TXCLEAR - Implies the transmit buffer if exists
// SERIAL_PURGE_RXCLEAR - Implies the receive buffer if exists.
//

#define SERIAL_PURGE_TXABORT 0x00000001
#define SERIAL_PURGE_RXABORT 0x00000002
#define SERIAL_PURGE_TXCLEAR 0x00000004
#define SERIAL_PURGE_RXCLEAR 0x00000008

//
// Communication defines
//

#define STOP_BIT_1      0
#define STOP_BITS_1_5   1
#define STOP_BITS_2     2

#define NO_PARITY        0
#define ODD_PARITY       1
#define EVEN_PARITY      2
#define MARK_PARITY      3
#define SPACE_PARITY     4


//
// This structure is used to set and retrieve the special characters
// used by the nt serial driver.
//
// Note that the driver will return an error if xonchar == xoffchar.
//

typedef struct _SERIAL_CHARS {
    UCHAR EofChar;
    UCHAR ErrorChar;
    UCHAR BreakChar;
    UCHAR EventChar;
    UCHAR XonChar;
    UCHAR XoffChar;
    } SERIAL_CHARS,*PSERIAL_CHARS;

//
// This structure is used to contain the flow control
// and handshaking setup.
//
// A reasonably precise explaination of how they all
// work can be found in the OS/2 tech references.
//
// For Xon/Xofflimit:
//
// When there are more characters then
//
// (typeaheadbuffersize - xofflimit)
//
// in the typeahead buffer then the driver will perform all flow
// control that the app has enabled so that the sender will (hopefully)
// stop sending characters.
//
// When there are less than xonlimit number of characters in the
// typeahead buffer the driver will perform all flow control that
// the app has enabled so that the sender will hopefully start sending
// characters again.
//
// It should be noted that if Xoff character is sent then the
// driver will also stop transmitting any more characters.  This is to
// provide support for those systems that take any character that
// follows an Xoff as an implied Xon.
//

typedef struct _SERIAL_HANDFLOW {
    ULONG ControlHandShake;
    ULONG FlowReplace;
    LONG XonLimit;
    LONG XoffLimit;
    } SERIAL_HANDFLOW,*PSERIAL_HANDFLOW;

#define SERIAL_DTR_MASK           ((ULONG)0x03)
#define SERIAL_DTR_CONTROL        ((ULONG)0x01)
#define SERIAL_DTR_HANDSHAKE      ((ULONG)0x02)
#define SERIAL_CTS_HANDSHAKE      ((ULONG)0x08)
#define SERIAL_DSR_HANDSHAKE      ((ULONG)0x10)
#define SERIAL_DCD_HANDSHAKE      ((ULONG)0x20)
#define SERIAL_OUT_HANDSHAKEMASK  ((ULONG)0x38)
#define SERIAL_DSR_SENSITIVITY    ((ULONG)0x40)
#define SERIAL_ERROR_ABORT        ((ULONG)0x80000000)
#define SERIAL_CONTROL_INVALID    ((ULONG)0x7fffff84)
#define SERIAL_AUTO_TRANSMIT      ((ULONG)0x01)
#define SERIAL_AUTO_RECEIVE       ((ULONG)0x02)
#define SERIAL_ERROR_CHAR         ((ULONG)0x04)
#define SERIAL_NULL_STRIPPING     ((ULONG)0x08)
#define SERIAL_BREAK_CHAR         ((ULONG)0x10)
#define SERIAL_RTS_MASK           ((ULONG)0xc0)
#define SERIAL_RTS_CONTROL        ((ULONG)0x40)
#define SERIAL_RTS_HANDSHAKE      ((ULONG)0x80)
#define SERIAL_TRANSMIT_TOGGLE    ((ULONG)0xc0)
#define SERIAL_XOFF_CONTINUE      ((ULONG)0x80000000)
#define SERIAL_FLOW_INVALID       ((ULONG)0x7fffff20)

//
// These are the following reasons that the device could be holding.
//
#define SERIAL_TX_WAITING_FOR_CTS      ((ULONG)0x00000001)
#define SERIAL_TX_WAITING_FOR_DSR      ((ULONG)0x00000002)
#define SERIAL_TX_WAITING_FOR_DCD      ((ULONG)0x00000004)
#define SERIAL_TX_WAITING_FOR_XON      ((ULONG)0x00000008)
#define SERIAL_TX_WAITING_XOFF_SENT    ((ULONG)0x00000010)
#define SERIAL_TX_WAITING_ON_BREAK     ((ULONG)0x00000020)
#define SERIAL_RX_WAITING_FOR_DSR      ((ULONG)0x00000040)

//
// These are the error values that can be returned by the
// driver.
//
#define SERIAL_ERROR_BREAK             ((ULONG)0x00000001)
#define SERIAL_ERROR_FRAMING           ((ULONG)0x00000002)
#define SERIAL_ERROR_OVERRUN           ((ULONG)0x00000004)
#define SERIAL_ERROR_QUEUEOVERRUN      ((ULONG)0x00000008)
#define SERIAL_ERROR_PARITY            ((ULONG)0x00000010)


//
// This structure is used by IOCTL_SERIAL_INTERNAL_BASIC_SETTINGS
// and IOCTL_SERIAL_INTERNAL_RESTORE_SETTINGS
//

typedef struct _SERIAL_BASIC_SETTINGS {
   SERIAL_TIMEOUTS Timeouts;
   SERIAL_HANDFLOW HandFlow;
   ULONG RxFifo;
   ULONG TxFifo;