readme_recoverexcdemo

来自「Vxworks官方demo源代码 学习VXWORKS很好的资料」· 代码 · 共 242 行

FILE LIST -
             recoverExcDemo.c

DESCRIPTION -
	     Demonstrates using signals to allow a task to recover gracefully
	     from an exception.

RUNNING DEMO -
	     Place the recoverExcDemo.c in your <Tornado> dir. Depending on
	     the target you have, define the CPU in your compile line and
	     use the Makefile in the BSP dir. to compile.

             To run this code invoke the function recoverDemo().

CAVEAT    -  This code fails on a mv1604 board.

TESTED ON -   Host/Target : Solaris 2.5.1 / hkv960
	      VxWorks     : 5.3.1

EXAMPLE COMPILE LINE -
	      make recoverExcDemo.o

%make recoverExcDemo.o
/folk/mayur/tor101-ppc/target/config/hkv960> make recoverExcDemo.o
cc960 -B/petaluma1/mayur/tor101-ppc/host/sun4-solaris2/lib/gcc-lib/ -mca 
-mstrict-align -ansi -nostdinc -O -fvolatile -fno-builtin  -Wall -I/h   -I. 
-I/petaluma1/mayur/tor101-ppc/target/config/all 
-I/petaluma1/mayur/tor101-ppc/target/h 
-I/petaluma1/mayur/tor101-ppc/target/src/config 
-I/petaluma1/mayur/tor101-ppc/target/src/drv -DCPU=I960CA 
-DVX_IGNORE_GNU_LIBS    -c recoverExcDemo.c

OUTPUTS/LOGFILE -

On VxWorks target:
==================

-> ld <recoverExcDemo.o
value = 666272 = 0xa2aa0
-> recoverDemo()

Exception number 2: Task: 0x7cd540 () 

Operation Fault
fault type: 0x2
subtype   : 0x2
ip        : 0xe19a0
pcw       : 0xd86088ff
acw       : 0x1002
value = 0 = 0x0

The Output on Console:
======================
demo_recover...
demo_recover...setup sigvec
causing bus error

Signal SIGILL received
recover from signal 4. val = 50 

TESTED ON -   Host/Target : Solaris 2.5.1 / mv177
              VxWorks     : 5.3.1

EXAMPLE COMPILE LINE -
              make MC68060 recoverExcDemo.o

%make MC68060 recoverExcDemo.o
cc68k -B/petaluma1/mayur/tor101-ppc/host/sun4-solaris2/lib/gcc-lib/ -m68040 
-ansi -nostdinc -O2 -fvolatile -fno-builtin -Wall -I/h   -I. 
-I/petaluma1/mayur/tor101-ppc/target/config/all 
-I/petaluma1/mayur/tor101-ppc/target/h 
-I/petaluma1/mayur/tor101-ppc/target/src/config 
-I/petaluma1/mayur/tor101-ppc/target/src/drv -DCPU=MC68060     
-c recoverExcDemo.c

OUTPUTS/LOGFILE -

On VxWorks target:
==================

-> ld <recoverExcDemo.o
value = 662336 = 0xa1b40
-> recoverDemo()

Exception number 4: Task: 0x1fb57b4 () 

Illegal Instruction
Status Register     : 0
value = 0 = 0x0
 
The Output on Console:
======================
demo_recover...
demo_recover...setup sigvec
causing bus error

Signal SIGILL received
recover from signal 4. val = 50 

TESTED ON -  Host/Target : Solaris 2.5.1 / mv1603
	     VxWorks     : 5.3.1

EXAMPLE COMPILE LINE -
	     make CPU=PPC603 recoverExcDemo.o

%make CPU=PPC603 recoverExcDemo.o
ccppc -B/petaluma1/mayur/tor101-ppc/host/sun4-solaris2/lib/gcc-lib/ 
-mstrict-align -ansi -nostdinc -O2 -fvolatile -fno-builtin -fno-for-scope  
-Wall -I/h   -I. -I/petaluma1/mayur/tor101-ppc/target/config/all 
-I/petaluma1/mayur/tor101-ppc/target/h 
-I/petaluma1/mayur/tor101-ppc/target/src/config 
-I/petaluma1/mayur/tor101-ppc/target/src/drv -DCPU=PPC603  -DMV1600 
-DTARGET_DIR="\"mv1603\""   -c recoverExcDemo.c

OUTPUTS/LOGFILE -

On VxWorks target:
==================

-> ld <recoverExcDemo.o
value = 662248 = 0xa1ae8
-> recoverDemo ()

Exception number 1792: Task: 0x5d1ca0 () 

program
program counter:  0xffffffff
machine status:   0
value = 0 = 0x0

The Output on Console:
======================
demo_recover...
demo_recover...setup sigvec
causing bus error

Signal SIGILL received
recover from signal 4. val = 50 


TESTED ON -  Host/Target : Solaris 2.5.1 / mv2604
	     VxWorks     : 5.3.1

EXAMPLE COMPILE LINE -
             ccppc -c -I/petaluma1/mayur/tor101/target/h -DCPU=PPC604 -c recoverExcDemo.c

%ccppc -c -I/petaluma1/mayur/tor101/target/h -DCPU=PPC604 -c recoverExcDemo.c

OUTPUTS/LOGFILE -

On VxWorks target:
==================
-> ld <recoverExcDemo.o
value = 662184 = 0xa1aa8
-> recoverDemo()

Exception number 1792: Task: 0xbe7c20 () 

program
program counter:  0xffffffff
machine status:   0
value = 0 = 0x0

The Output on Console:
======================
demo_recover...
demo_recover...setup sigvec
causing bus error

Signal SIGILL received
recover from signal 4. val = 50 


TESTED ON - Host/Target : Solaris 2.5.1 /mv2603
	    VxWorks     : 5.3.1

EXAMPLE COMPILE LINE -
	    ccppc -c -I/petaluma1/mayur/tor101/target/h -DCPU=PPC604 -c recoverExcDemo.c

% ccppc -c -I/petaluma1/mayur/tor101/target/h -DCPU=PPC604 -c recoverExcDemo.c

OUTPUTS/LOGFILE -

On VxWorks target:
==================

-> ld< recoverExcDemo.o
value = 661544 = 0xa1828
-> recoverDemo()       

Exception number 1792: Task: 0xbe7d28 () 

Unknown floating point exception
program counter:  0xffffffff
machine status:   0xbe7c48
FP status & ctrl: 0
value = 0 = 0x0

The Output on Console:
======================
demo_recover...
demo_recover...setup sigvec
causing bus error

Signal SIGILL received
recover from signal 4. val = 50 


TESTED ON -  Host/Target : Solaris 2.5.1 / mv1603
	     VxWorks     : 5.3.1

EXAMPLE COMPILE LINE -
	     ccppc -c -I/petaluma1/mayur/tor101/target/h -DCPU=PPC604 -c recoverExcDemo.c

%ccppc -c -I/petaluma1/mayur/tor101/target/h -DCPU=PPC604 -c recoverExcDemo.c

OUTPUTS/LOGFILE -

On VxWorks target:
==================
-> ld <recoverExcDemo.o
value = 662184 = 0xa1aa8 = in_losing + 0x2c
-> recoverDemo ()

Exception number 1792: Task: 0x5cc8d8 () 

Unknown floating point exception
program counter:  0xffffffff
machine status:   0x5cc7f8
FP status & ctrl: 0
value = 0 = 0x0

The Output on Console:
======================
demo_recover...
demo_recover...setup sigvec
causing bus error

Signal SIGILL received
recover from signal 4. val = 50