📄 hp871xb readme.html
字号:
<html>
<head>
<title>hp871xb Instrument Driver Readme</title>
</head>
<body>
<pre>
<font face = "Times New Roman", size = 3>
<h2>hp871xb Instrument Driver Readme</h2>
To rate this driver, go to the hp871xb driver download page on the <a href = http://www.ni.com/idnet>Instrument Driver Network</a>.
<h4>1. Overview</h4>
Instrument Driver Technology: Plug and Play
Supported Language(s): LabVIEW
Supported Model(s): 8711B, 8712B, 8713B, 8714B
Model(s) Tested: n/a
Interface(s): GPIB
Firmware Revision Tested: n/a
Certified: Yes
NI Supported: Yes
Source Code Available: Yes
Driver Revision: 1.1
Original Release Date: 01/01/96
Current Revision Date: 06/29/04
<h4>2. Required Software</h4>
Some software components need to be installed before using this instrument driver. The minimum versions of
these components are listed below, and can be downloaded from the Download Site.
VISA 1.2
Note: VISA has additional software requirements. For example, unless you are using a serial interface,
NI-VISA requires that NI-488.2 and/or NI-VXI be installed on your system. Check with VISA help for additional
support software and hardware requirements.
<h4>3. Installation Instructions</h4>
LabVIEW:
Instrument drivers should be installed as a subdirectory of the labview\instr.lib. For example, the HP34401A
instrument driver, which is included with LabVIEW, is installed in the following directory:
labview\instr.lib\hp34401a
Within this directory you can find the menu files and VI libraries that make up an instrument driver. The
menu files allow you to view the instrument driver VIs from the Functions palette. The VI libraries contain
the instrument driver VIs.
<h4>4. Using the Instrument Driver</h4>
LabVIEW:
To verify communication with your instrument and test a typical programmatic instrument operation, you should
first open the Getting Started or Example VIs the instrument driver. Look over each of the controls and set
them appropriately. Generally, with the exception of the address field, the defaults for most controls will
be sufficient for your first run. You will need to set the instrument resource name appropriately. After
running the VI, check to see that reasonable data was returned and an error was not reported in the error
cluster.
After you have verified basic communication with your instrument, you might want to customize instrument
control for your needs. If your application needs are similar to the Getting Started or Example VI, the
simplest means of creating a customized VI is to save a copy of the Getting Started or Example VI by
selecting Save As from the File menu. You can then modify this example to meet your specific needs.
For more details, reference the <i>LabVIEW Help</i> under <i>Help » VI, Function, & How-To Help</i>.
<h4>5. Known Issues</h4>
To report issues or provide feedback about this instrument driver, please send an email to <a
href="mailto:instrument.driver@ni.com">instrument.drivers@ni.com</a>.
<!-- Add known issues here as necessary. -->
"HP871xb Split Directory/File" does not have a VI extension but still works inside the .llb, VI Tree, and
other subVIs. Also, all VI's containing "/" in the file name are not compatible with windows explorer.
In order to keep backwards compability, these issues are not resolved.
<h4>6. Revision History</h4>
The latest version of this and other LabVIEW and LabWindows/CVI instrument drivers can be downloaded at the
<a href = http://www.ni.com/idnet>Instrument Driver Network</a>.
REV 1.0, 01/01/96
REV 1.1, 06/29/04, LV 7.0
Minor Updates throughout driver
HP871xB Limit Line.vi - VI was modified in accordance with Chapter 10 RF Network Analyzers
Programmers Guide to include the commands "TYPE LMAX/LMIN/PMAX/PMIN", "AMPL:STAR/AMP:STOP",
"FREQ:STAR/FREQ:STOP", and "POW:STAR/POW:STOP". These commands were not tested on the instrument
and therefore have not been verified.
Modified by: Aaron Jones, Austin, TX
<!-- add the date the update was made, what changes were made, and Who made it
example:
REV 1.01, 04/09/04, LV 7.0
Minor Update made on such and such.vi
Modified by: John Doe, Austin,TX. -->
<!-- add additional Revision Information here if necessary.-->
</font>
</pre>
</body>
</html>
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -