⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci.c

📁 u-boot 源代码
💻 C
字号:
/* * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA * */#include <asm/mmu.h>#include <common.h>#include <asm/global_data.h>#include <pci.h>#include <asm/mpc8349_pci.h>#include <i2c.h>#if defined(CONFIG_OF_FLAT_TREE)#include <ft_build.h>#elif defined(CONFIG_OF_LIBFDT)#include <libfdt.h>#endifDECLARE_GLOBAL_DATA_PTR;#ifdef CONFIG_PCI/* System RAM mapped to PCI space */#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE#ifndef CONFIG_PCI_PNPstatic struct pci_config_table pci_mpc8349emds_config_table[] = {	{PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,	 PCI_IDSEL_NUMBER, PCI_ANY_ID, 	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,				     PCI_ENET0_MEMADDR,				     PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER		}	},	{}};#endifstatic struct pci_controller pci_hose[] = {       {#ifndef CONFIG_PCI_PNP       config_table:pci_mpc8349emds_config_table,#endif       },       {#ifndef CONFIG_PCI_PNP       config_table:pci_mpc8349emds_config_table,#endif       }};/************************************************************************** * * pib_init() -- initialize the PCA9555PW IO expander on the PIB board * */voidpib_init(void){	u8 val8, orig_i2c_bus;	/*	 * Assign PIB PMC slot to desired PCI bus	 */	/* Switch temporarily to I2C bus #2 */	orig_i2c_bus = i2c_get_bus_num();	i2c_set_bus_num(1);	val8 = 0;	i2c_write(0x23, 0x6, 1, &val8, 1);	i2c_write(0x23, 0x7, 1, &val8, 1);	val8 = 0xff;	i2c_write(0x23, 0x2, 1, &val8, 1);	i2c_write(0x23, 0x3, 1, &val8, 1);	val8 = 0;	i2c_write(0x26, 0x6, 1, &val8, 1);	val8 = 0x34;	i2c_write(0x26, 0x7, 1, &val8, 1);#if defined(PCI_64BIT)	val8 = 0xf4;	/* PMC2:PCI1/64-bit */#elif defined(PCI_ALL_PCI1)	val8 = 0xf3;	/* PMC1:PCI1 PMC2:PCI1 PMC3:PCI1 */#elif defined(PCI_ONE_PCI1)	val8 = 0xf9;	/* PMC1:PCI1 PMC2:PCI2 PMC3:PCI2 */#else	val8 = 0xf5;	/* PMC1:PCI1 PMC2:PCI1 PMC3:PCI2 */#endif	i2c_write(0x26, 0x2, 1, &val8, 1);	val8 = 0xff;	i2c_write(0x26, 0x3, 1, &val8, 1);	val8 = 0;	i2c_write(0x27, 0x6, 1, &val8, 1);	i2c_write(0x27, 0x7, 1, &val8, 1);	val8 = 0xff;	i2c_write(0x27, 0x2, 1, &val8, 1);	val8 = 0xef;	i2c_write(0x27, 0x3, 1, &val8, 1);	asm("eieio");#if defined(PCI_64BIT)	printf("PCI1: 64-bit on PMC2\n");#elif defined(PCI_ALL_PCI1)	printf("PCI1: 32-bit on PMC1, PMC2, PMC3\n");#elif defined(PCI_ONE_PCI1)	printf("PCI1: 32-bit on PMC1\n");	printf("PCI2: 32-bit on PMC2, PMC3\n");#else	printf("PCI1: 32-bit on PMC1, PMC2\n");	printf("PCI2: 32-bit on PMC3\n");#endif	/* Reset to original I2C bus */	i2c_set_bus_num(orig_i2c_bus);}/************************************************************************** * pci_init_board() * * NOTICE: PCI2 is not currently supported * */voidpci_init_board(void){	volatile immap_t *	immr;	volatile clk83xx_t *	clk;	volatile law83xx_t *	pci_law;	volatile pot83xx_t *	pci_pot;	volatile pcictrl83xx_t *	pci_ctrl;	volatile pciconf83xx_t *	pci_conf;	u16 reg16;	u32 reg32;	u32 dev;	struct	pci_controller * hose;	immr = (immap_t *)CFG_IMMR;	clk = (clk83xx_t *)&immr->clk;	pci_law = immr->sysconf.pcilaw;	pci_pot = immr->ios.pot;	pci_ctrl = immr->pci_ctrl;	pci_conf = immr->pci_conf;	hose = &pci_hose[0];	pib_init();	/*	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode	 */	reg32 = clk->occr;	udelay(2000);	clk->occr = 0xff000000;	udelay(2000);	/*	 * Release PCI RST Output signal	 */	pci_ctrl[0].gcr = 0;	udelay(2000);	pci_ctrl[0].gcr = 1;#ifdef CONFIG_MPC83XX_PCI2	pci_ctrl[1].gcr = 0;	udelay(2000);	pci_ctrl[1].gcr = 1;#endif	/* We need to wait at least a 1sec based on PCI specs */	{		int i;		for (i = 0; i < 1000; ++i)			udelay (1000);	}	/*	 * Configure PCI Local Access Windows	 */	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_4M;	/*	 * Configure PCI Outbound Translation Windows	 */	/* PCI1 mem space - prefetch */	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);	/* PCI1 IO space */	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);	/* PCI1 mmio - non-prefetch mem space */	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[2].pocmr = POCMR_EN | (POCMR_CM_256M & POCMR_CM_MASK);	/*	 * Configure PCI Inbound Translation Windows	 */	/* we need RAM mapped to PCI space for the devices to	 * access main memory */	pci_ctrl[0].pitar1 = 0x0;	pci_ctrl[0].pibar1 = 0x0;	pci_ctrl[0].piebar1 = 0x0;	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);	hose->first_busno = 0;	hose->last_busno = 0xff;	/* PCI memory prefetch space */	pci_set_region(hose->regions + 0,		       CFG_PCI1_MEM_BASE,		       CFG_PCI1_MEM_PHYS,		       CFG_PCI1_MEM_SIZE,		       PCI_REGION_MEM|PCI_REGION_PREFETCH);	/* PCI memory space */	pci_set_region(hose->regions + 1,		       CFG_PCI1_MMIO_BASE,		       CFG_PCI1_MMIO_PHYS,		       CFG_PCI1_MMIO_SIZE,		       PCI_REGION_MEM);	/* PCI IO space */	pci_set_region(hose->regions + 2,		       CFG_PCI1_IO_BASE,		       CFG_PCI1_IO_PHYS,		       CFG_PCI1_IO_SIZE,		       PCI_REGION_IO);	/* System memory space */	pci_set_region(hose->regions + 3,		       CONFIG_PCI_SYS_MEM_BUS,		       CONFIG_PCI_SYS_MEM_PHYS,		       gd->ram_size,		       PCI_REGION_MEM | PCI_REGION_MEMORY);	hose->region_count = 4;	pci_setup_indirect(hose,			   (CFG_IMMR+0x8300),			   (CFG_IMMR+0x8304));	pci_register_hose(hose);	/*	 * Write to Command register	 */	reg16 = 0xff;	dev = PCI_BDF(hose->first_busno, 0, 0);	pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);	/*	 * Clear non-reserved bits in status register.	 */	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);#ifdef CONFIG_PCI_SCAN_SHOW	printf("PCI:   Bus Dev VenId DevId Class Int\n");#endif	/*	 * Hose scan.	 */	hose->last_busno = pci_hose_scan(hose);#ifdef CONFIG_MPC83XX_PCI2	hose = &pci_hose[1];	/*	 * Configure PCI Outbound Translation Windows	 */	/* PCI2 mem space - prefetch */	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | (POCMR_CM_256M & POCMR_CM_MASK);	/* PCI2 IO space */	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | (POCMR_CM_1M & POCMR_CM_MASK);	/* PCI2 mmio - non-prefetch mem space */	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | (POCMR_CM_256M & POCMR_CM_MASK);	/*	 * Configure PCI Inbound Translation Windows	 */	/* we need RAM mapped to PCI space for the devices to	 * access main memory */	pci_ctrl[1].pitar1 = 0x0;	pci_ctrl[1].pibar1 = 0x0;	pci_ctrl[1].piebar1 = 0x0;	pci_ctrl[1].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);	hose->first_busno = pci_hose[0].last_busno + 1;	hose->last_busno = 0xff;	/* PCI memory prefetch space */	pci_set_region(hose->regions + 0,		       CFG_PCI2_MEM_BASE,		       CFG_PCI2_MEM_PHYS,		       CFG_PCI2_MEM_SIZE,		       PCI_REGION_MEM|PCI_REGION_PREFETCH);	/* PCI memory space */	pci_set_region(hose->regions + 1,		       CFG_PCI2_MMIO_BASE,		       CFG_PCI2_MMIO_PHYS,		       CFG_PCI2_MMIO_SIZE,		       PCI_REGION_MEM);	/* PCI IO space */	pci_set_region(hose->regions + 2,		       CFG_PCI2_IO_BASE,		       CFG_PCI2_IO_PHYS,		       CFG_PCI2_IO_SIZE,		       PCI_REGION_IO);	/* System memory space */	pci_set_region(hose->regions + 3,		       CONFIG_PCI_SYS_MEM_BUS,		       CONFIG_PCI_SYS_MEM_PHYS,		       gd->ram_size,		       PCI_REGION_MEM | PCI_REGION_MEMORY);	hose->region_count = 4;	pci_setup_indirect(hose,			   (CFG_IMMR+0x8380),			   (CFG_IMMR+0x8384));	pci_register_hose(hose);	/*	 * Write to Command register	 */	reg16 = 0xff;	dev = PCI_BDF(hose->first_busno, 0, 0);	pci_hose_read_config_word (hose, dev, PCI_COMMAND, &reg16);	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);	/*	 * Clear non-reserved bits in status register.	 */	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);	/*	 * Hose scan.	 */	hose->last_busno = pci_hose_scan(hose);#endif}#if defined(CONFIG_OF_LIBFDT)voidft_pci_setup(void *blob, bd_t *bd){	int nodeoffset;	int err;	int tmp[2];	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");	if (nodeoffset >= 0) {		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);		err = fdt_setprop(blob, nodeoffset, "bus-range",				  tmp, sizeof(tmp));		tmp[0] = cpu_to_be32(gd->pci_clk);		err = fdt_setprop(blob, nodeoffset, "clock-frequency",				  tmp, sizeof(tmp[0]));	}#ifdef CONFIG_MPC83XX_PCI2	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8600");	if (nodeoffset >= 0) {		tmp[0] = cpu_to_be32(pci_hose[1].first_busno);		tmp[1] = cpu_to_be32(pci_hose[1].last_busno);		err = fdt_setprop(blob, nodeoffset, "bus-range",				  tmp, sizeof(tmp));		tmp[0] = cpu_to_be32(gd->pci_clk);		err = fdt_setprop(blob, nodeoffset, "clock-frequency",				  tmp, sizeof(tmp[0]));	}#endif}#elif defined(CONFIG_OF_FLAT_TREE)voidft_pci_setup(void *blob, bd_t *bd){       	u32 *p;       	int len;       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);       	if (p != NULL) {		p[0] = pci_hose[0].first_busno;		p[1] = pci_hose[0].last_busno;       	}#ifdef CONFIG_MPC83XX_PCI2	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);	if (p != NULL) {		p[0] = pci_hose[1].first_busno;		p[1] = pci_hose[1].last_busno;	}#endif}#endif /* CONFIG_OF_FLAT_TREE */#endif /* CONFIG_PCI */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -