⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 pci.c

📁 u-boot 源代码
💻 C
字号:
/* * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#ifdef CONFIG_PCI#include <asm/mmu.h>#include <asm/global_data.h>#include <pci.h>#include <asm/mpc8349_pci.h>#include <i2c.h>#if defined(CONFIG_OF_FLAT_TREE)#include <ft_build.h>#elif defined(CONFIG_OF_LIBFDT)#include <libfdt.h>#endifDECLARE_GLOBAL_DATA_PTR;/* System RAM mapped to PCI space */#define CONFIG_PCI_SYS_MEM_BUS	CFG_SDRAM_BASE#define CONFIG_PCI_SYS_MEM_PHYS	CFG_SDRAM_BASE#ifndef CONFIG_PCI_PNPstatic struct pci_config_table pci_mpc8349itx_config_table[] = {	{	 PCI_ANY_ID,	 PCI_ANY_ID,	 PCI_ANY_ID,	 PCI_ANY_ID,	 PCI_IDSEL_NUMBER,	 PCI_ANY_ID,	 pci_cfgfunc_config_device,	 {	  PCI_ENET0_IOADDR,	  PCI_ENET0_MEMADDR,	  PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER}	 },	{}};#endifstatic struct pci_controller pci_hose[] = {	{#ifndef CONFIG_PCI_PNP	      config_table:pci_mpc8349itx_config_table,#endif	 },	{#ifndef CONFIG_PCI_PNP	      config_table:pci_mpc8349itx_config_table,#endif	 }};/************************************************************************** * pci_init_board() * * NOTICE: PCI2 is not currently supported * */void pci_init_board(void){	volatile immap_t *immr;	volatile clk83xx_t *clk;	volatile law83xx_t *pci_law;	volatile pot83xx_t *pci_pot;	volatile pcictrl83xx_t *pci_ctrl;	volatile pciconf83xx_t *pci_conf;	u8 reg8;	u16 reg16;	u32 reg32;	u32 dev;	struct pci_controller *hose;	immr = (immap_t *) CFG_IMMR;	clk = (clk83xx_t *) & immr->clk;	pci_law = immr->sysconf.pcilaw;	pci_pot = immr->ios.pot;	pci_ctrl = immr->pci_ctrl;	pci_conf = immr->pci_conf;	hose = &pci_hose[0];	/*	 * Configure PCI controller and PCI_CLK_OUTPUT both in 66M mode	 */	reg32 = clk->occr;	udelay(2000);#ifdef CONFIG_HARD_I2C	i2c_set_bus_num(1);	/* Read the PCI_M66EN jumper setting */	if ((i2c_read(CFG_I2C_8574_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0) ||	    (i2c_read(CFG_I2C_8574A_ADDR2, 0, 0, &reg8, sizeof(reg8)) == 0)) {		if (reg8 & I2C_8574_PCI66)			clk->occr = 0xff000000;	/* 66 MHz PCI */		else			clk->occr = 0xff600001;	/* 33 MHz PCI */	} else {		clk->occr = 0xff600001;	/* 33 MHz PCI */	}#else	clk->occr = 0xff000000;	/* 66 MHz PCI */#endif	udelay(2000);	/*	 * Release PCI RST Output signal	 */	pci_ctrl[0].gcr = 0;	udelay(2000);	pci_ctrl[0].gcr = 1;#ifdef CONFIG_MPC83XX_PCI2	pci_ctrl[1].gcr = 0;	udelay(2000);	pci_ctrl[1].gcr = 1;#endif	/* We need to wait at least a 1sec based on PCI specs */	{		int i;		for (i = 0; i < 1000; i++)			udelay(1000);	}	/*	 * Configure PCI Local Access Windows	 */	pci_law[0].bar = CFG_PCI1_MEM_PHYS & LAWBAR_BAR;	pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_1G;	pci_law[1].bar = CFG_PCI1_IO_PHYS & LAWBAR_BAR;	pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_32M;	/*	 * Configure PCI Outbound Translation Windows	 */	/* PCI1 mem space - prefetch */	pci_pot[0].potar = (CFG_PCI1_MEM_BASE >> 12) & POTAR_TA_MASK;	pci_pot[0].pobar = (CFG_PCI1_MEM_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[0].pocmr = POCMR_EN | POCMR_PREFETCH_EN | POCMR_CM_256M;	/* PCI1 IO space */	pci_pot[1].potar = (CFG_PCI1_IO_BASE >> 12) & POTAR_TA_MASK;	pci_pot[1].pobar = (CFG_PCI1_IO_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M;	/* PCI1 mmio - non-prefetch mem space */	pci_pot[2].potar = (CFG_PCI1_MMIO_BASE >> 12) & POTAR_TA_MASK;	pci_pot[2].pobar = (CFG_PCI1_MMIO_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M;	/*	 * Configure PCI Inbound Translation Windows	 */	/* we need RAM mapped to PCI space for the devices to	 * access main memory */	pci_ctrl[0].pitar1 = 0x0;	pci_ctrl[0].pibar1 = 0x0;	pci_ctrl[0].piebar1 = 0x0;	pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP |	    PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1);	hose->first_busno = 0;	hose->last_busno = 0xff;	/* PCI memory prefetch space */	pci_set_region(hose->regions + 0,		       CFG_PCI1_MEM_BASE,		       CFG_PCI1_MEM_PHYS,		       CFG_PCI1_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);	/* PCI memory space */	pci_set_region(hose->regions + 1,		       CFG_PCI1_MMIO_BASE,		       CFG_PCI1_MMIO_PHYS, CFG_PCI1_MMIO_SIZE, PCI_REGION_MEM);	/* PCI IO space */	pci_set_region(hose->regions + 2,		       CFG_PCI1_IO_BASE,		       CFG_PCI1_IO_PHYS, CFG_PCI1_IO_SIZE, PCI_REGION_IO);	/* System memory space */	pci_set_region(hose->regions + 3,		       CONFIG_PCI_SYS_MEM_BUS,		       CONFIG_PCI_SYS_MEM_PHYS,		       gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);	hose->region_count = 4;	pci_setup_indirect(hose,			   (CFG_IMMR + 0x8300), (CFG_IMMR + 0x8304));	pci_register_hose(hose);	/*	 * Write to Command register	 */	reg16 = 0xff;	dev = PCI_BDF(hose->first_busno, 0, 0);	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);	/*	 * Clear non-reserved bits in status register.	 */	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);#ifdef CONFIG_PCI_SCAN_SHOW	printf("PCI:   Bus Dev VenId DevId Class Int\n");#endif	/*	 * Hose scan.	 */	hose->last_busno = pci_hose_scan(hose);#ifdef CONFIG_MPC83XX_PCI2	hose = &pci_hose[1];	/*	 * Configure PCI Outbound Translation Windows	 */	/* PCI2 mem space - prefetch */	pci_pot[3].potar = (CFG_PCI2_MEM_BASE >> 12) & POTAR_TA_MASK;	pci_pot[3].pobar = (CFG_PCI2_MEM_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[3].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_PREFETCH_EN | POCMR_CM_256M;	/* PCI2 IO space */	pci_pot[4].potar = (CFG_PCI2_IO_BASE >> 12) & POTAR_TA_MASK;	pci_pot[4].pobar = (CFG_PCI2_IO_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[4].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_IO | POCMR_CM_16M;	/* PCI2 mmio - non-prefetch mem space */	pci_pot[5].potar = (CFG_PCI2_MMIO_BASE >> 12) & POTAR_TA_MASK;	pci_pot[5].pobar = (CFG_PCI2_MMIO_PHYS >> 12) & POBAR_BA_MASK;	pci_pot[5].pocmr = POCMR_EN | POCMR_PCI2 | POCMR_CM_256M;	/*	 * Configure PCI Inbound Translation Windows	 */	/* we need RAM mapped to PCI space for the devices to	 * access main memory */	pci_ctrl[1].pitar1 = 0x0;	pci_ctrl[1].pibar1 = 0x0;	pci_ctrl[1].piebar1 = 0x0;	pci_ctrl[1].piwar1 =	    PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | PIWAR_WTT_SNOOP |	    (__ilog2(gd->ram_size) - 1);	hose->first_busno = pci_hose[0].last_busno + 1;	hose->last_busno = 0xff;	/* PCI memory prefetch space */	pci_set_region(hose->regions + 0,		       CFG_PCI2_MEM_BASE,		       CFG_PCI2_MEM_PHYS,		       CFG_PCI2_MEM_SIZE, PCI_REGION_MEM | PCI_REGION_PREFETCH);	/* PCI memory space */	pci_set_region(hose->regions + 1,		       CFG_PCI2_MMIO_BASE,		       CFG_PCI2_MMIO_PHYS, CFG_PCI2_MMIO_SIZE, PCI_REGION_MEM);	/* PCI IO space */	pci_set_region(hose->regions + 2,		       CFG_PCI2_IO_BASE,		       CFG_PCI2_IO_PHYS, CFG_PCI2_IO_SIZE, PCI_REGION_IO);	/* System memory space */	pci_set_region(hose->regions + 3,		       CONFIG_PCI_SYS_MEM_BUS,		       CONFIG_PCI_SYS_MEM_PHYS,		       gd->ram_size, PCI_REGION_MEM | PCI_REGION_MEMORY);	hose->region_count = 4;	pci_setup_indirect(hose,			   (CFG_IMMR + 0x8380), (CFG_IMMR + 0x8384));	pci_register_hose(hose);	/*	 * Write to Command register	 */	reg16 = 0xff;	dev = PCI_BDF(hose->first_busno, 0, 0);	pci_hose_read_config_word(hose, dev, PCI_COMMAND, &reg16);	reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;	pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16);	/*	 * Clear non-reserved bits in status register.	 */	pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);	pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);	pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08);	/*	 * Hose scan.	 */	hose->last_busno = pci_hose_scan(hose);#endif}#if defined(CONFIG_OF_LIBFDT)voidft_pci_setup(void *blob, bd_t *bd){	int nodeoffset;	int err;	int tmp[2];	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");	if (nodeoffset >= 0) {		tmp[0] = cpu_to_be32(pci_hose[0].first_busno);		tmp[1] = cpu_to_be32(pci_hose[0].last_busno);		err = fdt_setprop(blob, nodeoffset, "bus-range",				  tmp, sizeof(tmp));		tmp[0] = cpu_to_be32(gd->pci_clk);		err = fdt_setprop(blob, nodeoffset, "clock-frequency",				  tmp, sizeof(tmp[0]));	}#ifdef CONFIG_MPC83XX_PCI2	nodeoffset = fdt_path_offset(blob, "/" OF_SOC "/pci@8500");	if (nodeoffset >= 0) {		tmp[0] = cpu_to_be32(pci_hose[1].first_busno);		tmp[1] = cpu_to_be32(pci_hose[1].last_busno);		err = fdt_setprop(blob, nodeoffset, "bus-range",				  tmp, sizeof(tmp));		tmp[0] = cpu_to_be32(gd->pci_clk);		err = fdt_setprop(blob, nodeoffset, "clock-frequency",				  tmp, sizeof(tmp[0]));	}#endif}#elif defined(CONFIG_OF_FLAT_TREE)voidft_pci_setup(void *blob, bd_t *bd){       	u32 *p;       	int len;       	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8500/bus-range", &len);       	if (p != NULL) {		p[0] = pci_hose[0].first_busno;		p[1] = pci_hose[0].last_busno;       	}#ifdef CONFIG_MPC83XX_PCI2	p = (u32 *)ft_get_prop(blob, "/" OF_SOC "/pci@8600/bus-range", &len);	if (p != NULL) {		p[0] = pci_hose[1].first_busno;		p[1] = pci_hose[1].last_busno;	}#endif}#endif /* CONFIG_OF_FLAT_TREE */#endif /* CONFIG_PCI */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -