⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 dp83848.c

📁 u-boot 源代码
💻 C
字号:
/* * National Semiconductor DP83848 PHY Driver for TI DaVinci * (TMS320DM644x) based boards. * * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * * -------------------------------------------------------- * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <net.h>#include <dp83848.h>#include <asm/arch/emac_defs.h>#ifdef CONFIG_DRIVER_TI_EMAC#ifdef CONFIG_CMD_NETint dp83848_is_phy_connected(int phy_addr){	u_int16_t	id1, id2;	if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID1_REG, &id1))		return(0);	if (!dm644x_eth_phy_read(phy_addr, DP83848_PHYID2_REG, &id2))		return(0);	if ((id1 == DP83848_PHYID1_OUI) && (id2 == DP83848_PHYID2_OUI))		return(1);	return(0);}int dp83848_get_link_speed(int phy_addr){	u_int16_t		tmp;	volatile emac_regs*	emac = (emac_regs *)EMAC_BASE_ADDR;	if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))		return(0);	if (!(tmp & DP83848_LINK_STATUS))	/* link up? */		return(0);	if (!dm644x_eth_phy_read(phy_addr, DP83848_PHY_STAT_REG, &tmp))		return(0);	/* Speed doesn't matter, there is no setting for it in EMAC... */	if (tmp & DP83848_SPEED) {		if (tmp & DP83848_DUPLEX) {			/* set DM644x EMAC for Full Duplex  */			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;		} else {			/*set DM644x EMAC for Half Duplex  */			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;		}		return(1);	} else {		if (tmp & DP83848_DUPLEX) {			/* set DM644x EMAC for Full Duplex  */			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE | EMAC_MACCONTROL_FULLDUPLEX_ENABLE;		} else {			/*set DM644x EMAC for Half Duplex  */			emac->MACCONTROL = EMAC_MACCONTROL_MIIEN_ENABLE;		}		return(1);	}	return(0);}int dp83848_init_phy(int phy_addr){	int	ret = 1;	if (!dp83848_get_link_speed(phy_addr)) {		/* Try another time */		udelay(100000);		ret = dp83848_get_link_speed(phy_addr);	}	/* Disable PHY Interrupts */	dm644x_eth_phy_write(phy_addr, DP83848_PHY_INTR_CTRL_REG, 0);	return(ret);}int dp83848_auto_negotiate(int phy_addr){	u_int16_t	tmp;	if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))		return(0);	/* Restart Auto_negotiation  */	tmp &= ~DP83848_AUTONEG;	/* remove autonegotiation enable */	tmp |= DP83848_ISOLATE;		/* Electrically isolate PHY */	dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);	/* Set the Auto_negotiation Advertisement Register	 * MII advertising for Next page, 100BaseTxFD and HD,	 * 10BaseTFD and HD, IEEE 802.3	 */	tmp = DP83848_NP | DP83848_TX_FDX | DP83848_TX_HDX |	 	DP83848_10_FDX | DP83848_10_HDX | DP83848_AN_IEEE_802_3;	dm644x_eth_phy_write(phy_addr, DP83848_ANA_REG, tmp);	/* Read Control Register */	if (!dm644x_eth_phy_read(phy_addr, DP83848_CTL_REG, &tmp))		return(0);	tmp |= DP83848_SPEED_SELECT | DP83848_AUTONEG | DP83848_DUPLEX_MODE;	dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);	/* Restart Auto_negotiation  */	tmp |= DP83848_RESTART_AUTONEG;	dm644x_eth_phy_write(phy_addr, DP83848_CTL_REG, tmp);	/*check AutoNegotiate complete */	udelay(10000);	if (!dm644x_eth_phy_read(phy_addr, DP83848_STAT_REG, &tmp))		return(0);	if (!(tmp & DP83848_AUTONEG_COMP))		return(0);	return (dp83848_get_link_speed(phy_addr));}#endif	/* CONFIG_CMD_NET */#endif	/* CONFIG_DRIVER_ETHER */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -