⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 i2c.c

📁 u-boot 源代码
💻 C
字号:
/* * TI DaVinci (TMS320DM644x) I2C driver. * * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> * * -------------------------------------------------------- * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#ifdef CONFIG_DRIVER_DAVINCI_I2C#include <i2c.h>#include <asm/arch/hardware.h>#include <asm/arch/i2c_defs.h>#define CHECK_NACK() \	do {\		if (tmp & (I2C_TIMEOUT | I2C_STAT_NACK)) {\			REG(I2C_CON) = 0;\			return(1);\		}\	} while (0)static int wait_for_bus(void){	int	stat, timeout;	REG(I2C_STAT) = 0xffff;	for (timeout = 0; timeout < 10; timeout++) {		if (!((stat = REG(I2C_STAT)) & I2C_STAT_BB)) {			REG(I2C_STAT) = 0xffff;			return(0);		}		REG(I2C_STAT) = stat;		udelay(50000);	}	REG(I2C_STAT) = 0xffff;	return(1);}static int poll_i2c_irq(int mask){	int	stat, timeout;	for (timeout = 0; timeout < 10; timeout++) {		udelay(1000);		stat = REG(I2C_STAT);		if (stat & mask) {			return(stat);		}	}	REG(I2C_STAT) = 0xffff;	return(stat | I2C_TIMEOUT);}void flush_rx(void){	int	dummy;	while (1) {		if (!(REG(I2C_STAT) & I2C_STAT_RRDY))			break;		dummy = REG(I2C_DRR);		REG(I2C_STAT) = I2C_STAT_RRDY;		udelay(1000);	}}void i2c_init(int speed, int slaveadd){	u_int32_t	div, psc;	if (REG(I2C_CON) & I2C_CON_EN) {		REG(I2C_CON) = 0;		udelay (50000);	}	psc = 2;	div = (CFG_HZ_CLOCK / ((psc + 1) * speed)) - 10;	/* SCLL + SCLH */	REG(I2C_PSC) = psc;			/* 27MHz / (2 + 1) = 9MHz */	REG(I2C_SCLL) = (div * 50) / 100;	/* 50% Duty */	REG(I2C_SCLH) = div - REG(I2C_SCLL);	REG(I2C_OA) = slaveadd;	REG(I2C_CNT) = 0;	/* Interrupts must be enabled or I2C module won't work */	REG(I2C_IE) = I2C_IE_SCD_IE | I2C_IE_XRDY_IE |		I2C_IE_RRDY_IE | I2C_IE_ARDY_IE | I2C_IE_NACK_IE;	/* Now enable I2C controller (get it out of reset) */	REG(I2C_CON) = I2C_CON_EN;	udelay(1000);}int i2c_probe(u_int8_t chip){	int	rc = 1;	if (chip == REG(I2C_OA)) {		return(rc);	}	REG(I2C_CON) = 0;	if (wait_for_bus()) {return(1);}	/* try to read one byte from current (or only) address */	REG(I2C_CNT) = 1;	REG(I2C_SA) = chip;	REG(I2C_CON) = (I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP);	udelay (50000);	if (!(REG(I2C_STAT) & I2C_STAT_NACK)) {		rc = 0;		flush_rx();		REG(I2C_STAT) = 0xffff;	} else {		REG(I2C_STAT) = 0xffff;		REG(I2C_CON) |= I2C_CON_STP;		udelay(20000);		if (wait_for_bus()) {return(1);}	}	flush_rx();	REG(I2C_STAT) = 0xffff;	REG(I2C_CNT) = 0;	return(rc);}int i2c_read(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len){	u_int32_t	tmp;	int		i;	if ((alen < 0) || (alen > 2)) {		printf("%s(): bogus address length %x\n", __FUNCTION__, alen);		return(1);	}	if (wait_for_bus()) {return(1);}	if (alen != 0) {		/* Start address phase */		tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX;		REG(I2C_CNT) = alen;		REG(I2C_SA) = chip;		REG(I2C_CON) = tmp;		tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);		CHECK_NACK();		switch (alen) {			case 2:				/* Send address MSByte */				if (tmp & I2C_STAT_XRDY) {					REG(I2C_DXR) = (addr >> 8) & 0xff;				} else {					REG(I2C_CON) = 0;					return(1);				}				tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);				CHECK_NACK();				/* No break, fall through */			case 1:				/* Send address LSByte */				if (tmp & I2C_STAT_XRDY) {					REG(I2C_DXR) = addr & 0xff;				} else {					REG(I2C_CON) = 0;					return(1);				}				tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK | I2C_STAT_ARDY);				CHECK_NACK();				if (!(tmp & I2C_STAT_ARDY)) {					REG(I2C_CON) = 0;					return(1);				}		}	}	/* Address phase is over, now read 'len' bytes and stop */	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_STP;	REG(I2C_CNT) = len & 0xffff;	REG(I2C_SA) = chip;	REG(I2C_CON) = tmp;	for (i = 0; i < len; i++) {		tmp = poll_i2c_irq(I2C_STAT_RRDY | I2C_STAT_NACK | I2C_STAT_ROVR);		CHECK_NACK();		if (tmp & I2C_STAT_RRDY) {			buf[i] = REG(I2C_DRR);		} else {			REG(I2C_CON) = 0;			return(1);		}	}	tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);	CHECK_NACK();	if (!(tmp & I2C_STAT_SCD)) {		REG(I2C_CON) = 0;		return(1);	}	flush_rx();	REG(I2C_STAT) = 0xffff;	REG(I2C_CNT) = 0;	REG(I2C_CON) = 0;	return(0);}int i2c_write(u_int8_t chip, u_int32_t addr, int alen, u_int8_t *buf, int len){	u_int32_t	tmp;	int		i;	if ((alen < 0) || (alen > 2)) {		printf("%s(): bogus address length %x\n", __FUNCTION__, alen);		return(1);	}	if (len < 0) {		printf("%s(): bogus length %x\n", __FUNCTION__, len);		return(1);	}	if (wait_for_bus()) {return(1);}	/* Start address phase */	tmp = I2C_CON_EN | I2C_CON_MST | I2C_CON_STT | I2C_CON_TRX | I2C_CON_STP;	REG(I2C_CNT) = (alen == 0) ? len & 0xffff : (len & 0xffff) + alen;	REG(I2C_SA) = chip;	REG(I2C_CON) = tmp;	switch (alen) {		case 2:			/* Send address MSByte */			tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);			CHECK_NACK();			if (tmp & I2C_STAT_XRDY) {				REG(I2C_DXR) = (addr >> 8) & 0xff;			} else {				REG(I2C_CON) = 0;				return(1);			}			/* No break, fall through */		case 1:			/* Send address LSByte */			tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);			CHECK_NACK();			if (tmp & I2C_STAT_XRDY) {				REG(I2C_DXR) = addr & 0xff;			} else {				REG(I2C_CON) = 0;				return(1);			}	}	for (i = 0; i < len; i++) {		tmp = poll_i2c_irq(I2C_STAT_XRDY | I2C_STAT_NACK);		CHECK_NACK();		if (tmp & I2C_STAT_XRDY) {			REG(I2C_DXR) = buf[i];		} else {			return(1);		}	}	tmp = poll_i2c_irq(I2C_STAT_SCD | I2C_STAT_NACK);	CHECK_NACK();	if (!(tmp & I2C_STAT_SCD)) {		REG(I2C_CON) = 0;		return(1);	}	flush_rx();	REG(I2C_STAT) = 0xffff;	REG(I2C_CNT) = 0;	REG(I2C_CON) = 0;	return(0);}u_int8_t i2c_reg_read(u_int8_t chip, u_int8_t reg){	u_int8_t	tmp;	i2c_read(chip, reg, 1, &tmp, 1);	return(tmp);}void i2c_reg_write(u_int8_t chip, u_int8_t reg, u_int8_t val){	u_int8_t	tmp;	i2c_write(chip, reg, 1, &tmp, 1);}#endif /* CONFIG_DRIVER_DAVINCI_I2C */

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -