📄 ps2_mouse9.qsf
字号:
# Copyright (C) 1991-2004 Altera Corporation
# Any megafunction design, and related netlist (encrypted or decrypted),
# support information, device programming or simulation file, and any other
# associated documentation or information provided by Altera or a partner
# under Altera's Megafunction Partnership Program may be used only
# to program PLD devices (but not masked PLD devices) from Altera. Any
# other use of such megafunction design, netlist, support information,
# device programming or simulation file, or any other related documentation
# or information is prohibited for any other purpose, including, but not
# limited to modification, reverse engineering, de-compiling, or use with
# any other silicon devices, unless such use is explicitly licensed under
# a separate agreement with Altera or a megafunction partner. Title to the
# intellectual property, including patents, copyrights, trademarks, trade
# secrets, or maskworks, embodied in any such megafunction design, netlist,
# support information, device programming or simulation file, or any other
# related documentation or information provided by Altera or a megafunction
# partner, remains with Altera, the megafunction partner, or their respective
# licensors. No other licenses, including any licenses needed under any third
# party's intellectual property, are provided herein.
# The default values for assignments are stored in the file
# ps2_mouse9_assignment_defaults.qdf
# If this file doesn't exist, and for assignments not listed, see file
# assignment_defaults.qdf
# Altera recommends that you do not modify this file. This
# file is updated automatically by the Quartus II software
# and any changes you make may be lost or overwritten.
# Project-Wide Assignments
# ========================
set_global_assignment -name ORIGINAL_QUARTUS_VERSION 4.1
set_global_assignment -name PROJECT_CREATION_TIME_DATE "13:16:22 SEPTEMBER 11, 2004"
set_global_assignment -name LAST_QUARTUS_VERSION 6.0
set_global_assignment -name VHDL_FILE ps2.vhd
set_global_assignment -name VHDL_FILE ps2_mouse9.vhd
# Pin & Location Assignments
# ==========================
set_location_assignment PIN_143 -to ps2_clk
set_location_assignment PIN_92 -to CLK1
# Timing Assignments
# ==================
set_global_assignment -name CUT_OFF_READ_DURING_WRITE_PATHS OFF
# Analysis & Synthesis Assignments
# ================================
set_global_assignment -name FAMILY Cyclone
set_global_assignment -name FLEX6K_OPTIMIZATION_TECHNIQUE SPEED
set_global_assignment -name FLEX10K_OPTIMIZATION_TECHNIQUE SPEED
set_global_assignment -name AUTO_LCELL_INSERTION ON
set_global_assignment -name TOP_LEVEL_ENTITY ps2_mouse9
# Fitter Assignments
# ==================
set_global_assignment -name DEVICE EP1C3T144C8
set_global_assignment -name AUTO_RESTART_CONFIGURATION OFF
set_global_assignment -name OPTIMIZE_HOLD_TIMING OFF
set_global_assignment -name FITTER_EFFORT "STANDARD FIT"
set_global_assignment -name AUTO_GLOBAL_CLOCK OFF
set_global_assignment -name AUTO_GLOBAL_OE OFF
set_global_assignment -name AUTO_GLOBAL_REGISTER_CONTROLS OFF
set_global_assignment -name MAX7000B_VCCIO_IOBANK1 3.3V
set_global_assignment -name MAX7000B_VCCIO_IOBANK2 3.3V
# Timing Analysis Assignments
# ===========================
set_global_assignment -name EXCLUDE_TPD_PATHS_LESS_THAN 0.0NS
# Simulator Assignments
# =====================
set_global_assignment -name START_TIME "0 ns"
# LogicLock Region Assignments
# ============================
set_global_assignment -name LOGICLOCK_INCREMENTAL_COMPILE_ASSIGNMENT OFF
set_global_assignment -name CDF_FILE Chain1.cdf
set_global_assignment -name LL_ROOT_REGION ON -section_id "Root Region"
set_global_assignment -name LL_MEMBER_STATE LOCKED -section_id "Root Region"
set_global_assignment -name USE_CONFIGURATION_DEVICE ON
set_global_assignment -name STRATIX_DEVICE_IO_STANDARD "3.3-V LVTTL"
set_location_assignment PIN_93 -to clk
set_location_assignment PIN_85 -to CODE1[0]
set_location_assignment PIN_96 -to CODE1[1]
set_location_assignment PIN_97 -to CODE1[2]
set_location_assignment PIN_98 -to CODE1[3]
set_location_assignment PIN_105 -to ps2_clk00
set_location_assignment PIN_144 -to ps2_data
set_location_assignment PIN_103 -to ps2_data00
set_location_assignment PIN_73 -to ps2_data2[0]
set_location_assignment PIN_74 -to ps2_data2[1]
set_location_assignment PIN_75 -to ps2_data2[2]
set_location_assignment PIN_76 -to ps2_data2[3]
set_location_assignment PIN_77 -to ps2_data2[4]
set_location_assignment PIN_78 -to ps2_data2[5]
set_location_assignment PIN_83 -to ps2_data2[6]
set_location_assignment PIN_84 -to ps2_data2[7]
set_location_assignment PIN_50 -to ps2_data2A[7]
set_location_assignment PIN_49 -to ps2_data2A[6]
set_location_assignment PIN_48 -to ps2_data2A[5]
set_location_assignment PIN_47 -to ps2_data2A[4]
set_location_assignment PIN_42 -to ps2_data2A[3]
set_location_assignment PIN_41 -to ps2_data2A[2]
set_location_assignment PIN_40 -to ps2_data2A[1]
set_location_assignment PIN_39 -to ps2_data2A[0]
set_location_assignment PIN_72 -to ps2_data3A[7]
set_location_assignment PIN_71 -to ps2_data3A[6]
set_location_assignment PIN_70 -to ps2_data3A[5]
set_location_assignment PIN_69 -to ps2_data3A[4]
set_location_assignment PIN_68 -to ps2_data3A[3]
set_location_assignment PIN_67 -to ps2_data3A[2]
set_location_assignment PIN_52 -to ps2_data3A[1]
set_location_assignment PIN_51 -to ps2_data3A[0]
set_location_assignment PIN_1 -to reset
set_location_assignment PIN_129 -to SPKS
set_location_assignment PIN_35 -to enk_1
set_global_assignment -name VECTOR_INPUT_SOURCE ps2_mouse9.scf
set_global_assignment -name VECTOR_WAVEFORM_FILE ps2_mouse9.vwf
set_global_assignment -name VECTOR_WAVEFORM_FILE Waveform1.vwf
set_global_assignment -name IGNORE_CLOCK_SETTINGS ON
set_global_assignment -name TSU_REQUIREMENT "100 ns"
set_global_assignment -name FMAX_REQUIREMENT "100 MHz"
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -