动态汉字.c

8×8LED实现汉字显示

#include <reg51.h>
#include<intrins.h>
#define uint unsigned int 
#define uchar unsigned char
//const unsigned char char_7[16]={0x10,0x38,0x7C,0xFE,0x38,0x38,0x38,0x38,0x38,0x38,0x38,0x38,0x38,0x38,0x38,0x38};
uchar  code char_8[320]={     0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                              0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                              0x00,0x20,0x08,0x60,0x0B,0xC0,0x7F,0xFE,0x09,0x80,0x08,0xC0,0x08,0x02,0x08,0x06,
							  0x0B,0xFC,0x4A,0x00,0x6A,0x00,0x2A,0x00,0x0B,0xFC,0x08,0x04,0x08,0x0C,0x00,0x00,//杭
						      0x00,0x00,0x00,0x00,0x01,0xC2,0x00,0x04,0x7F,0xF8,0x00,0x00,0x01,0xC0,0x00,0x00,
							  0x3F,0xFE,0x00,0x00,0x01,0xC0,0x00,0x00,0x7F,0xFE,0x00,0x00,0x00,0x00,0x00,0x00,//
						      0x00,0x00,0x00,0x00,0x00,0x00,0x0F,0xE0,0x09,0x20,0x09,0x20,0x09,0x20,0x7F,0xFE,
						      0x09,0x22,0x09,0x22,0x09,0x22,0x09,0x22,0x0F,0xE2,0x00,0x02,0x00,0x0E,0x00,0x00,//电
						      0x00,0x00,0x03,0x00,0x03,0x00,0x63,0x00,0x63,0x10,0x63,0x18,0x63,0x0C,0x67,0xFE,
							  0x6F,0xFE,0x7B,0x00,0x73,0x00,0x03,0x00,0x03,0x00,0x03,0x00,0x03,0x00,0x00,0x00,//子
							  0x00,0x10,0x24,0x20,0x24,0x40,0x3F,0xFE,0x24,0x20,0x24,0x10,0x24,0x00,0x00,0x20,
                              0x12,0x20,0x09,0x20,0x04,0xA0,0x00,0x20,0x7F,0xFF,0x00,0x20,0x00,0x20,0x00,0x20,//科
							 0x00,0x00,0x08,0x24,0x08,0x42,0x7F,0xFE,0x08,0x80,0x08,0x00,0x01,0x04,0x09,0x84,
                                0x09,0x44,0x09,0x28,0x3F,0x10,0x09,0x28,0x09,0x44,0x09,0x82,0x01,0x02,0x00,0x00,
						      0x00,0x00,0x06,0x02,0x06,0x06,0x06,0x0C,0x06,0x18,0x06,0x30,0x06,0x60,0x7F,0xC0,	
							 
							  0x7F,0xC0,0x06,0x60,0x06,0x30,0x06,0x18,0x06,0x0C,0x06,0x06,0x06,0x02,0x00,0x00,//大
						      0x00,0x00,0x0E,0x20,0x08,0x20,0x68,0x20,0x69,0x20,0x09,0x20,0x09,0x22,0x69,0x21,//学
						      0x69,0x7F,0x09,0x60,0x09,0xA0,0x69,0x20,0x68,0x20,0x08,0x20,0x0E,0x20,0x00,0x00,
							  0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
                              0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
							  };
   
						

/*void display(char row)
{
char j;
uint  lie=0x8000;
char high,low;
	//j用来控制屏上1帧显示内容停留的时间，即用来控制滚动速