📄 _impact.log

📁 cpld 驱动sja1000
💻 LOG
📖 第 1 页 / 共 3 页
字号:
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -defaultVersion 0 
Updating config file G:/gui_test/pxa255_cpld/top.jed...
PROGRESS_START - Starting Operation.
ERROR:iMPACT:583 - '1': The idcode read from the device does not match the   idcode in the bsdl File.
INFO:iMPACT:1578 - '1':  Device IDCODE :        00000110101101101010110111011011
INFO:iMPACT:1579 - '1': Expected IDCODE:    00001001011000001000000010010011
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
Command: Program -p 0 -e -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -defaultVersion 0 
PROGRESS_START - Starting Operation.
ERROR:iMPACT:583 - '1': The idcode read from the device does not match the   idcode in the bsdl File.
INFO:iMPACT:1578 - '1':  Device IDCODE :        00001011100100101001001000100101
INFO:iMPACT:1579 - '1': Expected IDCODE:    00001001011000001000000010010011
PROGRESS_END - End Operation.
Elapsed time =      2 sec.
Attempting to identify devices in the boundary-scan chain configuration...Command: Identify 
// *** BATCH CMD : Identify 
PROGRESS_START - Starting Operation.
Identifying chain contents ....INFO:iMPACT:1588 - '1':The part does not appear to be Xilinx Part.
'1': : Manufacturer's ID =Unknown , Version : 11
INFO:iMPACT:501 - '1': Added Device UNKNOWN successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
The bsdl for device 'UNKNOWN' is out of date. Please check your installation.
ERROR:iMPACT:477 - The bsdl for device 'UNKNOWN' is out of date. Please check   your installation.
PROGRESS_END - End Operation.
Elapsed time =      6 sec.
// *** BATCH CMD : identifyMPM 
Attempting to identify devices in the boundary-scan chain configuration...Command: Identify 
// *** BATCH CMD : Identify 
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5
INFO:iMPACT:1777 - 
   Reading D:/Xilinx/xc9500xl/data/xc95144xl.bsd...
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM 
// *** BATCH CMD : assignFile -p 1 -file "G:/gui_test/pxa255_cpld/top.jed"
'1': Loading file 'G:/gui_test/pxa255_cpld/top.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
Erasure completed successfully.
'1': Programming device...
done.
'1': Putting device in ISP mode...done.
'1': Putting device in ISP mode...done.
Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =      4 sec.
// *** BATCH CMD : assignFile -p 1 -file "G:/gui_test/pxa255_cpld/top.jed"
'1': Loading file 'G:/gui_test/pxa255_cpld/top.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Attempting to identify devices in the boundary-scan chain configuration...Command: Identify 
// *** BATCH CMD : Identify 
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5
INFO:iMPACT:1777 - 
   Reading D:/Xilinx/xc9500xl/data/xc95144xl.bsd...
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM 
// *** BATCH CMD : assignFile -p 1 -file "G:/gui_test/pxa255_cpld/top.jed"
'1': Loading file 'G:/gui_test/pxa255_cpld/top.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
Erasure completed successfully.
'1': Programming device...
done.
'1': Putting device in ISP mode...done.
'1': Putting device in ISP mode...done.
Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =      5 sec.
Attempting to identify devices in the boundary-scan chain configuration...Command: Identify 
// *** BATCH CMD : Identify 
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5
INFO:iMPACT:1777 - 
   Reading D:/Xilinx/xc9500xl/data/xc95144xl.bsd...
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time =      1 sec.
// *** BATCH CMD : identifyMPM 
// *** BATCH CMD : assignFile -p 1 -file "G:/gui_test/test/top.jed"
'1': Loading file 'G:/gui_test/test/top.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
Erasure completed successfully.
'1': Programming device...
done.
'1': Putting device in ISP mode...done.
'1': Putting device in ISP mode...done.
Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =      5 sec.
// *** BATCH CMD : assignFile -p 1 -file "G:/gui_test/pxa255_cpld/top.jed"
'1': Loading file 'G:/gui_test/pxa255_cpld/top.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
Erasure completed successfully.
'1': Programming device...
done.
'1': Putting device in ISP mode...done.
'1': Putting device in ISP mode...done.
Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =      4 sec.
Attempting to identify devices in the boundary-scan chain configuration...Command: Identify 
// *** BATCH CMD : Identify 
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5
INFO:iMPACT:1777 - 
   Reading D:/Xilinx/xc9500xl/data/xc95144xl.bsd...
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM 
// *** BATCH CMD : assignFile -p 1 -file "G:/gui_test/pxa255_cpld/top.jed"
'1': Loading file 'G:/gui_test/pxa255_cpld/top.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
Erasure completed successfully.
'1': Programming device...
done.
'1': Putting device in ISP mode...done.
'1': Putting device in ISP mode...done.
Programming completed successfully.
PROGRESS_END - End Operation.
Elapsed time =      5 sec.
Attempting to identify devices in the boundary-scan chain configuration...Command: Identify 
// *** BATCH CMD : Identify 
PROGRESS_START - Starting Operation.
Identifying chain contents ....'1': : Manufacturer's ID =Xilinx xc95144xl, Version : 5
INFO:iMPACT:1777 - 
   Reading D:/Xilinx/xc9500xl/data/xc95144xl.bsd...
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
done.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
PROGRESS_END - End Operation.
Elapsed time =      0 sec.
// *** BATCH CMD : identifyMPM 
// *** BATCH CMD : assignFile -p 1 -file "G:/gui_test/pxa255_cpld/top.jed"
'1': Loading file 'G:/gui_test/pxa255_cpld/top.jed' ...
done.
INFO:iMPACT:501 - '1': Added Device xc95144xl successfully.
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
----------------------------------------------------------------------
Command: Program -p 0 -e -defaultVersion 0 
// *** BATCH CMD : Program -p 1 -e -defaultVersion 0 
PROGRESS_START - Starting Operation.
Chain TCK freq = 0.
Validating chain...
Boundary-scan chain validated successfully.
'1': Erasing device...
💿 文件大小 982 K
👤 上传用户 xuhuizi
📂 所属分类微处理器开发
🏷️ 相关标签

#cpld #1000 #sja #驱动
⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -