led.fit.qmsg

来自「16bit霹靂燈 LED左右來回跑 時快時慢 也可以設定成跑馬燈形式」· QMSG 代码 · 共 13 行

{ "Info" "IQEXE_SEPARATOR" "" "Info: *******************************************************************" {  } {  } 3 0 "*******************************************************************" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_PRODUCT" "Fitter Quartus II " "Info: Running Quartus II Fitter" { { "Info" "IQEXE_START_BANNER_VERSION" "Version 8.1 Build 163 10/28/2008 SJ Web Edition " "Info: Version 8.1 Build 163 10/28/2008 SJ Web Edition" {  } {  } 0 0 "%1!s!" 0 0 "" 0 0} { "Info" "IQEXE_START_BANNER_TIME" "Wed May 20 19:35:03 2009 " "Info: Processing started: Wed May 20 19:35:03 2009" {  } {  } 0 0 "Processing started: %1!s!" 0 0 "" 0 0}  } {  } 4 0 "Running %2!s! %1!s!" 0 0 "" 0 0}
{ "Info" "IQEXE_START_BANNER_COMMANDLINE" "quartus_fit --read_settings_files=off --write_settings_files=off LED -c LED " "Info: Command: quartus_fit --read_settings_files=off --write_settings_files=off LED -c LED" {  } {  } 0 0 "Command: %1!s!" 0 0 "" 0 0}
{ "Info" "IMPP_MPP_USER_DEVICE" "LED EP2C35F672C6 " "Info: Selected device EP2C35F672C6 for design \"LED\"" {  } {  } 0 0 "Selected device %2!s! for design \"%1!s!\"" 0 0 "" 0 0}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "Low junction temperature 0 degrees C " "Info: Low junction temperature is 0 degrees C" {  } {  } 0 0 "%1!s! is %2!s!" 0 0 "" 0 0}
{ "Info" "ICUT_CUT_USING_OPERATING_CONDITION" "High junction temperature 85 degrees C " "Info: High junction temperature is 85 degrees C" {  } {  } 0 0 "%1!s! is %2!s!" 0 0 "" 0 0}
{ "Info" "IFITCC_FITCC_INFO_AUTO_FIT_COMPILATION_ON" "" "Info: Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" {  } {  } 0 0 "Fitter is performing an Auto Fit compilation, which may decrease Fitter effort to reduce compilation time" 0 0 "" 0 0}
{ "Warning" "WCPT_FEATURE_DISABLED_POST" "LogicLock " "Warning: Feature LogicLock is not available with your current license" {  } {  } 0 0 "Feature %1!s! is not available with your current license" 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED" "" "Info: Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" { { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C50F672C6 " "Info: Device EP2C50F672C6 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_MIGRATION_NOT_SELECTED_SUB" "EP2C70F672C6 " "Info: Device EP2C70F672C6 is compatible" {  } {  } 2 0 "Device %1!s! is compatible" 0 0 "" 0 0}  } {  } 2 0 "Device migration not selected. If you intend to use device migration later, you may need to change the pin assignments as they may be incompatible with other devices" 0 0 "" 0 0}
{ "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION" "3 " "Info: Fitter converted 3 user pins into dedicated programming pins" { { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~ASDO~ E3 " "Info: Pin ~ASDO~ is reserved at location E3" {  } { { "c:/altera/81/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/81/quartus/bin/pin_planner.ppl" { ~ASDO~ } } } { "c:/altera/81/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/81/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~ASDO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~nCSO~ D3 " "Info: Pin ~nCSO~ is reserved at location D3" {  } { { "c:/altera/81/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/81/quartus/bin/pin_planner.ppl" { ~nCSO~ } } } { "c:/altera/81/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/81/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~nCSO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0} { "Info" "IFIOMGR_RESERVED_PIN_WITH_LOCATION_SUB" "~LVDS150p/nCEO~ AE24 " "Info: Pin ~LVDS150p/nCEO~ is reserved at location AE24" {  } { { "c:/altera/81/quartus/bin/pin_planner.ppl" "" { PinPlanner "c:/altera/81/quartus/bin/pin_planner.ppl" { ~LVDS150p/nCEO~ } } } { "c:/altera/81/quartus/bin/TimingClosureFloorplan.fld" "" { Floorplan "c:/altera/81/quartus/bin/TimingClosureFloorplan.fld" "" "" { ~LVDS150p/nCEO~ } "NODE_NAME" } }  } 0 0 "Pin %1!s! is reserved at location %2!s!" 0 0 "" 0 0}  } {  } 0 0 "Fitter converted %1!d! user pins into dedicated programming pins" 0 0 "" 0 0}
{ "Info" "ITDC_FITTER_TIMING_ENGINE" "Classic " "Info: Fitter is using the Classic Timing Analyzer" {  } {  } 0 0 "Fitter is using the %1!s! Timing Analyzer" 0 0 "" 0 0}
{ "Info" "ITAN_TDC_NO_DEFAULT_OPTIMIZATION_GOALS" "" "Info: Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." {  } {  } 0 0 "Timing requirements not specified -- quality metrics such as performance and power consumption may be sacrificed to reduce compilation time." 0 0 "" 0 0}
{ "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL" "CLOCK_50 (placed in PIN N2 (CLK0, LVDSCLK0p, Input)) " "Info: Automatically promoted node CLOCK_50 (placed in PIN N2 (CLK0, LVDSCLK0p, Input))" { { "Info" "IFSAC_FSAC_ASSIGN_AUTO_GLOBAL_TO_SIGNAL_FANOUTS" "destinations Global Clock CLKCTRL_G2 " "Info: Automatically promoted destinations to use location or clock signal Global Clock CLKCTRL_G2" {  } {  } 0 0 "Automatically promoted %1!s! to use location or clock signal %2!s!" 0 0 "" 0 0} { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS" "" "Info: Following destination nodes may be non-global or may not use global or regional clocks" { { "Info" "IFSAC_FSAC_GLOBAL_UNASSIGNED_FANOUTS_SUB" "LED_PILI_F_S:inst\|DIVIDER\[25\] " "Info: Destination node LED_PILI_F_S:inst\|DIVIDER\[25\]" {  } { { "LED_PILI_F_S.vhd" "" { Text "C:/Documents and Settings/Administrator/