flash_util_func.h

MTK手机平台下载工具FLASHTOOL驱动源码

/*******************************************************************************
*  Copyright Statement:
*  --------------------
*  This software is protected by Copyright and the information contained
*  herein is confidential. The software may not be copied and the information
*  contained herein may not be used or disclosed except with the written
*  permission of MediaTek Inc. (C) 2004
*
*******************************************************************************/

/*******************************************************************************
 *
 * Filename:
 * ---------
 *	 flash_util_func.h
 *
 * Project:
 * --------
 *   FlashTool Download Agent 
 *
 * Description:
 * ------------
 *   Flash relative utility functions 
 *
 * Author:
 * -------
 *	 Amos Hsu 
 *
 *==============================================================================
 * 				HISTORY
 * Below this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *------------------------------------------------------------------------------
 * $Revision:   1.7  $
 * $Modtime:   Jan 05 2006 17:08:00  $
 * $Log:   //mtkvs01/vmdata/flash_tool/archives/DA/INC/flash_util_func.h-arc  $
 * 
 *    Rev 1.7   Jan 14 2006 00:22:00   mtk00539
 * New features:
 *  1. [DA] Supports INTEL Sibley family flash.
 * Resolution for 159: [FlashTool v2.7.1015]
 * 
 *    Rev 1.6   Oct 19 2005 14:45:02   mtk00539
 *  1. [BROM_DLL&DA][New] New H/W devices detection architecture including NOR, NAND, SRAM and DRAM detection. 
 *  2. [BROM_DLL&DA][New] DA partial download technic, that overcomes DA size exceeds MT6205B internal SRAM (32KB).
 *  3. [BROM_DLL&DA][New] Format verification option, each byte should be 0xFF after erasure. 
 *  4. [BROM_DLL&DA][New] DA validation to ensure invalid binary could not be loaded.
 *  5. [BROM_DLL&DA][New] Support NFB download. 
 *  6. [BROM_DLL&DA][New] Support NAND flash format with 3 method, NORMAL, FORCEDLY ERASE and MARK AS BAD BLOCK. 
 *  7. [BROM_DLL&DA][New] Support NAND flash read back with 4 methods, PAGE+ECC, PAGE ONLY, SPARE ONLY and PAGE+SPARE. 
 * Resolution for 140: [BROM_DLL v2.7.1008][New] Support NFB download and many new features.
 * 
 *    Rev 1.5   Jun 15 2005 12:37:00   mtk00539
 *  1. [DA][New] Support new flash devices TV0057A002AABD and TV0057A002AABD.
 *  2. [DA][New] Support RENESAS flash with F-WP#(LOW).
 * Resolution for 118: [BROM_DLL v2.4.1013][New] Support RENESAS flash with F-WP#(LOW).
 * 
 *    Rev 1.4   Nov 22 2004 12:23:50   mtk00539
 *  1. [DA][BUG FIX] Add data verification in status polling during erase or program operation.
 *  2. [DA][BUG FIX] Fix two dies flash detection fail in INTEL_CheckDevID(). 
 *  3. [DA][Change Behavior] When RX_BUFFER_FULL occurs, flush data queued in UART ring buffer til data is less than 512KB.
 *  4. [DA][New] Support Buffered-Program method for INTEL family flashes.
 *  5. [DA][New] Support new flashes [SHARP]LRS1828C and [RENESAS]M6MGB64BM34CDG.
 * Resolution for 99: [BROM_DLL v2.4.1008][New] Support INTEL family flash Buffered-Program method.
 * 
 *    Rev 1.3   Nov 05 2004 10:37:32   mtk00539
 *  1. [DA][BUG FIX] Fix format progress report error, percentage variable should not just use uint8.
 *  2. [DA][BUG FIX] Fix command error for AMD protection routines.
 *  3. [DA][Enhance] Fix UART_Printf compile warning in UART.C
 * Resolution for 96: [BROM_DLL v2.4.1007][New] Implement S/W compatible mechanism for MT6218B_FN and MT6218B_GN.
 * 
 *    Rev 1.2   Oct 29 2004 11:47:16   mtk00539
 *  1. [DA][BUG FIX] Read CFI boot sector flag to determine AM49DL3208GT and S71PL032J, since both flashes have the same id, but different layout.
 *  2. [DA][BUG FIX] Fix INTEL and RENESAS status checking flow.
 *  3. [DA][Enhance] Dump more logs in TEST_ExtSRAM().
 *  4. [DA][New] Support new flashes
 * 				[SAMSUNG] K5J6316CTM
 * 				[TOSHIBA] TH50VPF5682CDSB
 * 				[TOSHIBA] TH50VPF5683CDSB
 * 				[ISSI] IS75V16F128GS32
 * 				[RENESAS] M6MGT64BM34CDG
 * 				[ST] M30L0T7000T0, M36L0T7050T0
 * 				[ST] M30L0T7000B0, M36L0T7050B0
 * 				[SHARP] LRS1862
 * 				[SHARP] LRS1806A
 * 				[AMD] AM49DL3208GT
 * 				[SPANSION] S29PL032J, S71PL032J
 * Resolution for 92: [BROM_DLL v2.4.1006][BUG FIX] Fix AM49DL3208GT & S71PL032J download fail problem and some enhancement.
 * 
 *    Rev 1.1   Aug 03 2004 10:42:44   mtk00539
 *  1. [DA][BUG FIX] Invoke Board_Schematic()(old name is HW_Init()) before FUTL_CheckDevice(). Because FUTL_CheckDevice() must know the absolute address for each bank.
 *  2. [DA][New] Add 12 new flash devices support 
 * 				[SAMSUNG]K5A3280YT,
 * 				[TOSHIBA]TH50VPF6782AASB,
 * 				[TOSHIBA]TH50VPF6783AASB,
 * 				[TOSHIBA]TV00578002AABD,
 * 				[TOSHIBA]TV00578003AABD,
 * 				[Fujitsu]MB84VP24581HK,
 * 				[INTEL]INTEL_28F640W30_B,
 * 				[SPANSION]AM49PDL127BH,
 * 				[SPANSION]AM49PDL129BH,
 * 				[RENESAS]M6MGD13BW66CDG,
 * 				[Winbond]W19B322TM,
 * 				[Winbond]W19B323TM,
 *  3. [DA][New] Readback check after WORD program is done, so that DA won't have to keep the chksum.
 *  4. [DA][New] Auto-detect baseband chip type.
 *  5. [DA][New] Auto-detect external SRAM size.
 *  6. [DA][New] Merge MT6205B, MT6218B and MT6219 to an all-in-one DA.
 *  7. [DA][New] Merge flash stress test module.
 *  8. [DA][New] Modify makefile to build ARM or THUMB code.
 *  9. [DA][New] Construct a customization kit for customers to add new flash or SOC checking algorithm by themselves.
 * 10. [DA][Enhance] Split out AM29PDL128G function to improve the performance of general AMD callback functions.
 * 11. [DA][Enhance] Enhance RX_BUFF_FULL behavior to prevent always retry two times.
 * Resolution for 83: [BROM_DLL v2.4.1002] Merge all the DAs into all-in-one DA and fix many bugs and enhancement.
 * 
 *    Rev 1.0   Jul 19 2004 01:46:44   mtk00539
 * Initial revision.
 * 
 *------------------------------------------------------------------------------
 * Upper this line, this part is controlled by PVCS VM. DO NOT MODIFY!!
 *==============================================================================
 *******************************************************************************/
#ifndef _FLASH_UTIL_FUNC_H_
#define _FLASH_UTIL_FUNC_H_

#include "hw_config.h"
#include "flash_dev_tbl.h"

#define CB_CHECK_DEV_IDLE(dev, addr)					g_FlashDevTbl[dev].m_cmd->m_cb_chk_dev_idle(addr)
#define CB_SECTOR_ERASE(dev, blockaddr)					g_FlashDevTbl[dev].m_cmd->m_cb_sec_erase(blockaddr)
#define CB_SECTOR_ERASE_CHECK_DONE(dev, blockaddr)		g_FlashDevTbl[dev].m_cmd->m_cb_sec_erase_chk_done(blockaddr)
#define CB_PROGRAM_PRE_PROCESS(dev)						g_FlashDevTbl[dev].m_cmd->m_cb_pgm_pre_process(dev)
#define CB_PROGRAM_POST_PROCESS(dev)					g_FlashDevTbl[dev].m_cmd->m_cb_pgm_post_process(dev)
#define CB_PROGRAM_ENTER(dev, blockaddr)				g_FlashDevTbl[dev].m_cmd->m_cb_pgm_enter(blockaddr)
#define CB_PROGRAM_EXIT(dev, blockaddr)					g_FlashDevTbl[dev].m_cmd->m_cb_pgm_exit(blockaddr)
#define CB_PROGRAM(dev, ba, pa, data)					g_FlashDevTbl[dev].m_cmd->m_cb_pgm(ba, pa, data)
#define CB_PROGRAM_CHECK_DONE(dev, prog_addr)			g_FlashDevTbl[dev].m_cmd->m_cb_pgm_check_done(prog_addr)
#define CB_BUF_PROGRAM(dev, ba, pa, data, len)			g_FlashDevTbl[dev].m_cmd->m_cb_buf_pgm(ba, pa, data, len)
#define CB_BUF_PROGRAM_CHECK_DONE(dev, prog_addr)		g_FlashDevTbl[dev].m_cmd->m_cb_buf_pgm_check_done(prog_addr)
#define BUFPGM_SUPPORT(dev)								((NULL!=g_FlashDevTbl[dev].m_cmd->m_cb_buf_pgm) && (NULL!=g_FlashDevTbl[dev].m_cmd->m_cb_buf_pgm_check_done))

#define FLASH_DIE(dev, die_num)							(g_FlashDevTbl[dev].m_hw_info.m_die[die_num])
#define FLASH_DIE_LAYOUT(dev, die_num)					(g_FlashDevTbl[dev].m_hw_info.m_die[die_num].m_die_layout)
#define FLASH_DIE_SIZE(dev, die_num)					(g_FlashDevTbl[dev].m_hw_info.m_die[die_num].m_die_layout->m_size)
#define FLASH_DIE_COUNT(dev)							(g_FlashDevTbl[dev].m_hw_info.m_die_count)

#define REGION_BASE_OFFSET(dev, die_num, region)		(g_FlashDevTbl[dev].m_hw_info.m_die[die_num].m_die_layout->m_region_map[region].m_base_offset)
#define REGION_SECTOR_COUNT(dev, die_num, region)		(g_FlashDevTbl[dev].m_hw_info.m_die[die_num].m_die_layout->m_region_map[region].m_sector_count)
#define REGION_SECTOR_SIZE(dev, die_num, region)		(g_FlashDevTbl[dev].m_hw_info.m_die[die_num].m_die_layout->m_region_map[region].m_sector_size)
#define REGION_SIZE(dev, die_num, region)				(REGION_SECTOR_COUNT(dev, die_num, region)*REGION_SECTOR_SIZE(dev, die_num, region))
#define IF_EMPTY_REGION(dev, die_num, region)			((0==(g_FlashDevTbl[dev].m_hw_info.m_die[die_num].m_die_layout->m_region_map[region].m_sector_count))?TRUE:FALSE)

#ifdef __cplusplus
extern "C" {
#endif

extern STATUS_E		FUTL_CheckDevice(void);
extern bool			FUTL_CheckRange(const uint32 start_addr, const uint32 length);
extern bool			FUTL_SearchBaseAddr(const uint32 addr, uint32 *blk_addr, uint32 *blk_size);
extern uint32		FUTL_GetFlashDieBaseAddr(const uint16 die_num);
extern uint32		FUTL_GetFlashSize(void);
extern STATUS_E		FUTL_EraseSector(const uint32 addr, const uint32 blk_size, bool bValidation);
extern STATUS_E		FUTL_Erase_CheckDone(const uint32 blockaddr, const uint32 blocksize, bool bValidation);
extern STATUS_E		FUTL_Program_CheckDone(const uint32 prog_addr, const uint16 verify_data);
extern STATUS_E		FUTL_Buf_Program_CheckDone(const uint32 prog_addr, const uint16 *verify_data, const uint32 length_in_word);

#define	INTEL_SIBLEY_PGM_REGION_SIZE_IN_BYTE	1024

#define	MAX_BUFPGM_SIZE_IN_WORD		(INTEL_SIBLEY_PGM_REGION_SIZE_IN_BYTE/2)	// For INTEL Sibley, the max buffer is up to 1KB 

extern uint16	g_FLASH_PGM_BUF[MAX_BUFPGM_SIZE_IN_WORD];
extern uint32	g_FLASH_MAX_BUFPGM_SIZE_IN_BYTE;
extern uint32	g_FLASH_CUR_PGM_COUNT;
extern uint32	g_FLASH_CUR_PGM_ADDR;
extern uint32	g_FLASH_LAST_PGM_COUNT;
extern uint32	g_FLASH_LAST_PGM_ADDR;

#ifdef __cplusplus
}
#endif

#endif