ti_cc_hardware_board.h

来自「基于TI的MSP430处理器控制CC1100-CC2500射频芯片的代码」· C头文件 代码 · 共 48 行

//----------------------------------------------------------------------------
//  Description:  This file contains definitions specific to the hardware board.
//  Specifically, the definitions include hardware connections with the
//  CCxxxx connector port, LEDs, and switches.
//
//  MSP430/CC1100-2500 Interface Code Library v1.0
//
//  K. Quiring
//  Texas Instruments, Inc.
//  July 2006
//  IAR Embedded Workbench v3.42A
//----------------------------------------------------------------------------


#include "TI_CC_msp430.h"


#define TI_CC_LED_PxOUT         P2OUT
#define TI_CC_LED_PxDIR         P2DIR
#define TI_CC_LED1              0x02
#define TI_CC_LED2              0x04

#define TI_CC_SW_PxIN           P1IN
#define TI_CC_SW_PxIE           P1IE
#define TI_CC_SW_PxIES          P1IES
#define TI_CC_SW_PxIFG          P1IFG
#define TI_CC_SW1               0x01
#define TI_CC_SW2               0x02


#define TI_CC_GDO0_PxOUT        P1OUT
#define TI_CC_GDO0_PxIN         P1IN
#define TI_CC_GDO0_PxDIR        P1DIR
#define TI_CC_GDO0_PxIE         P1IE
#define TI_CC_GDO0_PxIES        P1IES
#define TI_CC_GDO0_PxIFG        P1IFG
#define TI_CC_GDO0_PIN          0x04

#define TI_CC_CSn_PxOUT         P4OUT
#define TI_CC_CSn_PxDIR         P4DIR
#define TI_CC_CSn_PIN           0x04    //p4.2为输出


//----------------------------------------------------------------------------
// Select which port will be used for interface to CCxxxx
//----------------------------------------------------------------------------
#define TI_CC_RF_SER_INTF       TI_CC_SER_INTF_USART1  // Interface to CCxxxx