📄 masklog.h
字号:
/* -*- mode: c; c-basic-offset: 8; -*- * vim: noexpandtab sw=8 ts=8 sts=0: * * Copyright (C) 2005 Oracle. All rights reserved. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * * You should have received a copy of the GNU General Public * License along with this program; if not, write to the * Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 021110-1307, USA. */#ifndef O2CLUSTER_MASKLOG_H#define O2CLUSTER_MASKLOG_H/* * For now this is a trivial wrapper around printk() that gives the critical * ability to enable sets of debugging output at run-time. In the future this * will almost certainly be redirected to relayfs so that it can pay a * substantially lower heisenberg tax. * * Callers associate the message with a bitmask and a global bitmask is * maintained with help from /proc. If any of the bits match the message is * output. * * We must have efficient bit tests on i386 and it seems gcc still emits crazy * code for the 64bit compare. It emits very good code for the dual unsigned * long tests, though, completely avoiding tests that can never pass if the * caller gives a constant bitmask that fills one of the longs with all 0s. So * the desire is to have almost all of the calls decided on by comparing just * one of the longs. This leads to having infrequently given bits that are * frequently matched in the high bits. * * _ERROR and _NOTICE are used for messages that always go to the console and * have appropriate KERN_ prefixes. We wrap these in our function instead of * just calling printk() so that this can eventually make its way through * relayfs along with the debugging messages. Everything else gets KERN_DEBUG. * The inline tests and macro dance give GCC the opportunity to quite cleverly * only emit the appropriage printk() when the caller passes in a constant * mask, as is almost always the case. * * All this bitmask nonsense is hidden from the /proc interface so that Joel * doesn't have an aneurism. Reading the file gives a straight forward * indication of which bits are on or off: * ENTRY off * EXIT off * TCP off * MSG off * SOCKET off * ERROR off * NOTICE on * * Writing changes the state of a given bit and requires a strictly formatted * single write() call: * * write(fd, "ENTRY on", 8); * * would turn the entry bit on. "1" is also accepted in the place of "on", and * "off" and "0" behave as expected. * * Some trivial shell can flip all the bits on or off: * * log_mask="/proc/fs/ocfs2_nodemanager/log_mask" * cat $log_mask | ( * while read bit status; do * # $1 is "on" or "off", say * echo "$bit $1" > $log_mask * done * ) *//* for task_struct */#include <linux/sched.h>/* bits that are frequently given and infrequently matched in the low word *//* NOTE: If you add a flag, you need to also update mlog.c! */#define ML_ENTRY 0x0000000000000001ULL /* func call entry */#define ML_EXIT 0x0000000000000002ULL /* func call exit */#define ML_TCP 0x0000000000000004ULL /* net cluster/tcp.c */#define ML_MSG 0x0000000000000008ULL /* net network messages */#define ML_SOCKET 0x0000000000000010ULL /* net socket lifetime */#define ML_HEARTBEAT 0x0000000000000020ULL /* hb all heartbeat tracking */#define ML_HB_BIO 0x0000000000000040ULL /* hb io tracing */#define ML_DLMFS 0x0000000000000080ULL /* dlm user dlmfs */#define ML_DLM 0x0000000000000100ULL /* dlm general debugging */#define ML_DLM_DOMAIN 0x0000000000000200ULL /* dlm domain debugging */#define ML_DLM_THREAD 0x0000000000000400ULL /* dlm domain thread */#define ML_DLM_MASTER 0x0000000000000800ULL /* dlm master functions */#define ML_DLM_RECOVERY 0x0000000000001000ULL /* dlm master functions */#define ML_AIO 0x0000000000002000ULL /* ocfs2 aio read and write */#define ML_JOURNAL 0x0000000000004000ULL /* ocfs2 journalling functions */#define ML_DISK_ALLOC 0x0000000000008000ULL /* ocfs2 disk allocation */#define ML_SUPER 0x0000000000010000ULL /* ocfs2 mount / umount */#define ML_FILE_IO 0x0000000000020000ULL /* ocfs2 file I/O */#define ML_EXTENT_MAP 0x0000000000040000ULL /* ocfs2 extent map caching */#define ML_DLM_GLUE 0x0000000000080000ULL /* ocfs2 dlm glue layer */#define ML_BH_IO 0x0000000000100000ULL /* ocfs2 buffer I/O */#define ML_UPTODATE 0x0000000000200000ULL /* ocfs2 caching sequence #'s */#define ML_NAMEI 0x0000000000400000ULL /* ocfs2 directory / namespace */#define ML_INODE 0x0000000000800000ULL /* ocfs2 inode manipulation */#define ML_VOTE 0x0000000001000000ULL /* ocfs2 node messaging */#define ML_DCACHE 0x0000000002000000ULL /* ocfs2 dcache operations */#define ML_CONN 0x0000000004000000ULL /* net connection management */#define ML_QUORUM 0x0000000008000000ULL /* net connection quorum */#define ML_EXPORT 0x0000000010000000ULL /* ocfs2 export operations *//* bits that are infrequently given and frequently matched in the high word */#define ML_ERROR 0x0000000100000000ULL /* sent to KERN_ERR */#define ML_NOTICE 0x0000000200000000ULL /* setn to KERN_NOTICE */#define ML_KTHREAD 0x0000000400000000ULL /* kernel thread activity */#define MLOG_INITIAL_AND_MASK (ML_ERROR|ML_NOTICE)#define MLOG_INITIAL_NOT_MASK (ML_ENTRY|ML_EXIT)#ifndef MLOG_MASK_PREFIX#define MLOG_MASK_PREFIX 0#endif/* * When logging is disabled, force the bit test to 0 for anything other * than errors and notices, allowing gcc to remove the code completely. * When enabled, allow all masks. */#if defined(CONFIG_OCFS2_DEBUG_MASKLOG)#define ML_ALLOWED_BITS ~0#else#define ML_ALLOWED_BITS (ML_ERROR|ML_NOTICE)#endif#define MLOG_MAX_BITS 64struct mlog_bits { unsigned long words[MLOG_MAX_BITS / BITS_PER_LONG];};extern struct mlog_bits mlog_and_bits, mlog_not_bits;#if BITS_PER_LONG == 32#define __mlog_test_u64(mask, bits) \ ( (u32)(mask & 0xffffffff) & bits.words[0] || \ ((u64)(mask) >> 32) & bits.words[1] )#define __mlog_set_u64(mask, bits) do { \ bits.words[0] |= (u32)(mask & 0xffffffff); \ bits.words[1] |= (u64)(mask) >> 32; \} while (0)#define __mlog_clear_u64(mask, bits) do { \ bits.words[0] &= ~((u32)(mask & 0xffffffff)); \ bits.words[1] &= ~((u64)(mask) >> 32); \} while (0)#define MLOG_BITS_RHS(mask) { \ { \ [0] = (u32)(mask & 0xffffffff), \ [1] = (u64)(mask) >> 32, \ } \}#else /* 32bit long above, 64bit long below */#define __mlog_test_u64(mask, bits) ((mask) & bits.words[0])#define __mlog_set_u64(mask, bits) do { \ bits.words[0] |= (mask); \} while (0)#define __mlog_clear_u64(mask, bits) do { \ bits.words[0] &= ~(mask); \} while (0)#define MLOG_BITS_RHS(mask) { { (mask) } }#endif/* * smp_processor_id() "helpfully" screams when called outside preemptible * regions in current kernels. sles doesn't have the variants that don't * scream. just do this instead of trying to guess which we're building * against.. *sigh*. */#define __mlog_cpu_guess ({ \ unsigned long _cpu = get_cpu(); \ put_cpu(); \ _cpu; \})/* In the following two macros, the whitespace after the ',' just * before ##args is intentional. Otherwise, gcc 2.95 will eat the * previous token if args expands to nothing. */#define __mlog_printk(level, fmt, args...) \ printk(level "(%u,%lu):%s:%d " fmt, current->pid, \ __mlog_cpu_guess, __PRETTY_FUNCTION__, __LINE__ , \ ##args)#define mlog(mask, fmt, args...) do { \ u64 __m = MLOG_MASK_PREFIX | (mask); \ if ((__m & ML_ALLOWED_BITS) && \ __mlog_test_u64(__m, mlog_and_bits) && \ !__mlog_test_u64(__m, mlog_not_bits)) { \ if (__m & ML_ERROR) \ __mlog_printk(KERN_ERR, "ERROR: "fmt , ##args); \ else if (__m & ML_NOTICE) \ __mlog_printk(KERN_NOTICE, fmt , ##args); \ else __mlog_printk(KERN_INFO, fmt , ##args); \ } \} while (0)#define mlog_errno(st) do { \ int _st = (st); \ if (_st != -ERESTARTSYS && _st != -EINTR && \ _st != AOP_TRUNCATED_PAGE && _st != -ENOSPC) \ mlog(ML_ERROR, "status = %lld\n", (long long)_st); \} while (0)#if defined(CONFIG_OCFS2_DEBUG_MASKLOG)#define mlog_entry(fmt, args...) do { \ mlog(ML_ENTRY, "ENTRY:" fmt , ##args); \} while (0)#define mlog_entry_void() do { \ mlog(ML_ENTRY, "ENTRY:\n"); \} while (0)/* * We disable this for sparse. */#if !defined(__CHECKER__)#define mlog_exit(st) do { \ if (__builtin_types_compatible_p(typeof(st), unsigned long)) \ mlog(ML_EXIT, "EXIT: %lu\n", (unsigned long) (st)); \ else if (__builtin_types_compatible_p(typeof(st), signed long)) \ mlog(ML_EXIT, "EXIT: %ld\n", (signed long) (st)); \ else if (__builtin_types_compatible_p(typeof(st), unsigned int) \ || __builtin_types_compatible_p(typeof(st), unsigned short) \ || __builtin_types_compatible_p(typeof(st), unsigned char)) \ mlog(ML_EXIT, "EXIT: %u\n", (unsigned int) (st)); \ else if (__builtin_types_compatible_p(typeof(st), signed int) \ || __builtin_types_compatible_p(typeof(st), signed short) \ || __builtin_types_compatible_p(typeof(st), signed char)) \ mlog(ML_EXIT, "EXIT: %d\n", (signed int) (st)); \ else if (__builtin_types_compatible_p(typeof(st), long long)) \ mlog(ML_EXIT, "EXIT: %lld\n", (long long) (st)); \ else \ mlog(ML_EXIT, "EXIT: %llu\n", (unsigned long long) (st)); \} while (0)#else#define mlog_exit(st) do { \ mlog(ML_EXIT, "EXIT: %lld\n", (long long) (st)); \} while (0)#endif#define mlog_exit_ptr(ptr) do { \ mlog(ML_EXIT, "EXIT: %p\n", ptr); \} while (0)#define mlog_exit_void() do { \ mlog(ML_EXIT, "EXIT\n"); \} while (0)#else#define mlog_entry(...) do { } while (0)#define mlog_entry_void(...) do { } while (0)#define mlog_exit(...) do { } while (0)#define mlog_exit_ptr(...) do { } while (0)#define mlog_exit_void(...) do { } while (0)#endif /* defined(CONFIG_OCFS2_DEBUG_MASKLOG) */#define mlog_bug_on_msg(cond, fmt, args...) do { \ if (cond) { \ mlog(ML_ERROR, "bug expression: " #cond "\n"); \ mlog(ML_ERROR, fmt, ##args); \ BUG(); \ } \} while (0)#include <linux/kobject.h>#include <linux/sysfs.h>int mlog_sys_init(struct kset *o2cb_subsys);void mlog_sys_shutdown(void);#endif /* O2CLUSTER_MASKLOG_H */
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -