⭐ 欢迎来到虫虫下载站! | 📦 资源下载 📁 资源专辑 ℹ️ 关于我们
⭐ 虫虫下载站

📄 startcf.h

📁 包函四个ucos--ii在飞思卡尔的MCF51QE128开发板上的应用范例
💻 H
字号:
/******************************************************************************
  FILE    : startcf.h
  PURPOSE : startup code for ColdFire
  LANGUAGE: C


  Notes:
        1) Default entry point is _startup. 
           . disable interrupts
           . the SP is set to __SP_AFTER_RESET
           . SP must be initialized to valid memory 
             in case the memory it points to is not valid using MEMORY_INIT macro
        2) __initialize_hardware is called. Here you can initialize memory and some peripherics
           at this point global variables are not initialized yet
        3) After __initialize_hardware memory is setup; initialize SP to _SP_INIT and perform 
           needed initialisations for the language (clear memory, data rom copy).
        4) void __initialize_system(void); is called
           to allow additional hardware initialization (UART, GPIOs, etc...)
        5) Jump to main 

*/
/********************************************************************************/

#ifndef STARTCF_H
#define STARTCF_H


#ifdef __cplusplus
extern "C" {
#endif

#ifdef STARTCF_INCLUDE
#include STARTCF_INCLUDE
#endif

#pragma warn_any_ptr_int_conv off
#pragma warn_absolute off

extern unsigned long far __SP_INIT[];
extern unsigned long far __SP_AFTER_RESET[];

#ifndef MEMORY_INIT
/* If MEMORY_INIT is set then it performs
   minimal memory initialization (to preset SP to __SP_AFTER_RESET, etc...) 
*/
#define MEMORY_INIT
#endif

void _startup(void);

#ifndef SUPPORT_ROM_TO_RAM
  /*
   * If SUPPORT_ROM_TO_RAM is set, _S_romp is used to define the copy to be performed.
   * If it is not set, there's a single block to copy, performed directly without 
   * using the __S_romp structure, based on __DATA_RAM, __DATA_ROM and
   * __DATA_END symbols.
   *
   * Set to 0 for more aggressive dead stripping ...
   */
#define SUPPORT_ROM_TO_RAM 1
#endif

/* format of the ROM table info entry ... */
typedef struct RomInfo {
	void            *Source;
	void            *Target;
	unsigned long    Size;
} RomInfo;

/* imported data */
extern far RomInfo _S_romp[];		/* linker defined symbol */

#ifdef __cplusplus
}
#endif

#endif

⌨️ 快捷键说明

复制代码 Ctrl + C
搜索代码 Ctrl + F
全屏模式 F11
切换主题 Ctrl + Shift + D
显示快捷键 ?
增大字号 Ctrl + =
减小字号 Ctrl + -