i2c-dev.h

自己做的交叉编译工具！gcc-3.4.5,glibc-2.3.6在ubuntu8.04上做的面向kernel-2.6.28的交叉编译工具

/*
    i2c-dev.h - i2c-bus driver, char device interface

    Copyright (C) 1995-97 Simon G. Vogl
    Copyright (C) 1998-99 Frodo Looijaard <[e-mail]>

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program; if not, write to the Free Software
    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/


#ifndef LIB_I2CDEV_H
#define LIB_I2CDEV_H

#include <linux/types.h>
#include <sys/ioctl.h>


/* -- i2c.h -- */


/*
 * I2C Message - used for pure i2c transaction, also from /dev interface
 */
struct i2c_msg {
	__u16 addr;	/* slave address			*/
	unsigned short flags;		
#define I2C_M_TEN	0x10	/* we have a ten bit chip address	*/
#define I2C_M_RD	0x01
#define I2C_M_NOSTART	0x4000
#define I2C_M_REV_DIR_ADDR	0x2000
#define I2C_M_IGNORE_NAK	0x1000
#define I2C_M_NO_RD_ACK		0x0800
	short len;		/* msg length				*/
	char *buf;		/* pointer to msg data			*/
	int err;
	short done;
};

/* To determine what functionality is present */

#define I2C_FUNC_I2C			0x00000001
#define I2C_FUNC_10BIT_ADDR		0x00000002
#define I2C_FUNC_PROTOCOL_MANGLING	0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */
#define I2C_FUNC_SMBUS_HWPEC_CALC	0x00000008 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_READ_WORD_DATA_PEC  0x00000800 /* SMBus 2.0 */ 
#define I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC 0x00001000 /* SMBus 2.0 */ 
#define I2C_FUNC_SMBUS_PROC_CALL_PEC	0x00002000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL_PEC 0x00004000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL	0x00008000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_QUICK		0x00010000 
#define I2C_FUNC_SMBUS_READ_BYTE	0x00020000 
#define I2C_FUNC_SMBUS_WRITE_BYTE	0x00040000 
#define I2C_FUNC_SMBUS_READ_BYTE_DATA	0x00080000 
#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA	0x00100000 
#define I2C_FUNC_SMBUS_READ_WORD_DATA	0x00200000 
#define I2C_FUNC_SMBUS_WRITE_WORD_DATA	0x00400000 
#define I2C_FUNC_SMBUS_PROC_CALL	0x00800000 
#define I2C_FUNC_SMBUS_READ_BLOCK_DATA	0x01000000 
#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK	0x04000000 /* I2C-like block xfer  */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK	0x08000000 /* w/ 1-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2	 0x10000000 /* I2C-like block xfer  */
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */
#define I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC  0x40000000 /* SMBus 2.0 */
#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC 0x80000000 /* SMBus 2.0 */

#define I2C_FUNC_SMBUS_BYTE I2C_FUNC_SMBUS_READ_BYTE | \
                            I2C_FUNC_SMBUS_WRITE_BYTE
#define I2C_FUNC_SMBUS_BYTE_DATA I2C_FUNC_SMBUS_READ_BYTE_DATA | \
                                 I2C_FUNC_SMBUS_WRITE_BYTE_DATA
#define I2C_FUNC_SMBUS_WORD_DATA I2C_FUNC_SMBUS_READ_WORD_DATA | \
                                 I2C_FUNC_SMBUS_WRITE_WORD_DATA
#define I2C_FUNC_SMBUS_BLOCK_DATA I2C_FUNC_SMBUS_READ_BLOCK_DATA | \
                                  I2C_FUNC_SMBUS_WRITE_BLOCK_DATA
#define I2C_FUNC_SMBUS_I2C_BLOCK I2C_FUNC_SMBUS_READ_I2C_BLOCK | \
                                  I2C_FUNC_SMBUS_WRITE_I2C_BLOCK
#define I2C_FUNC_SMBUS_I2C_BLOCK_2 I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \
                                   I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2
#define I2C_FUNC_SMBUS_BLOCK_DATA_PEC I2C_FUNC_SMBUS_READ_BLOCK_DATA_PEC | \
                                      I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC
#define I2C_FUNC_SMBUS_WORD_DATA_PEC  I2C_FUNC_SMBUS_READ_WORD_DATA_PEC | \
                                      I2C_FUNC_SMBUS_WRITE_WORD_DATA_PEC

#define I2C_FUNC_SMBUS_READ_BYTE_PEC		I2C_FUNC_SMBUS_READ_BYTE_DATA
#define I2C_FUNC_SMBUS_WRITE_BYTE_PEC		I2C_FUNC_SMBUS_WRITE_BYTE_DATA
#define I2C_FUNC_SMBUS_READ_BYTE_DATA_PEC	I2C_FUNC_SMBUS_READ_WORD_DATA
#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA_PEC	I2C_FUNC_SMBUS_WRITE_WORD_DATA
#define I2C_FUNC_SMBUS_BYTE_PEC			I2C_FUNC_SMBUS_BYTE_DATA
#define I2C_FUNC_SMBUS_BYTE_DATA_PEC		I2C_FUNC_SMBUS_WORD_DATA

#define I2C_FUNC_SMBUS_EMUL I2C_FUNC_SMBUS_QUICK | \
                            I2C_FUNC_SMBUS_BYTE | \
                            I2C_FUNC_SMBUS_BYTE_DATA | \
                            I2C_FUNC_SMBUS_WORD_DATA | \
                            I2C_FUNC_SMBUS_PROC_CALL | \
                            I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \
                            I2C_FUNC_SMBUS_WRITE_BLOCK_DATA_PEC | \
                            I2C_FUNC_SMBUS_I2C_BLOCK

/* 
 * Data for SMBus Messages 
 */
#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */	
#define I2C_SMBUS_I2C_BLOCK_MAX	32	/* Not specified but we use same structure */
union i2c_smbus_data {
	__u8 byte;
	__u16 word;
	__u8 block[I2C_SMBUS_BLOCK_MAX + 3]; /* block[0] is used for length */
                          /* one more for read length in block process call */
	                                            /* and one more for PEC */
};

/* smbus_access read or write markers */
#define I2C_SMBUS_READ	1
#define I2C_SMBUS_WRITE	0

/* SMBus transaction types (size parameter in the above functions) 
   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
#define I2C_SMBUS_QUICK		    0
#define I2C_SMBUS_BYTE		    1
#define I2C_SMBUS_BYTE_DATA	    2 
#define I2C_SMBUS_WORD_DATA	    3
#define I2C_SMBUS_PROC_CALL	    4
#define I2C_SMBUS_BLOCK_DATA	    5
#define I2C_SMBUS_I2C_BLOCK_DATA    6
#define I2C_SMBUS_BLOCK_PROC_CALL   7		/* SMBus 2.0 */
#define I2C_SMBUS_BLOCK_DATA_PEC    8		/* SMBus 2.0 */
#define I2C_SMBUS_PROC_CALL_PEC     9		/* SMBus 2.0 */
#define I2C_SMBUS_BLOCK_PROC_CALL_PEC  10	/* SMBus 2.0 */
#define I2C_SMBUS_WORD_DATA_PEC	   11		/* SMBus 2.0 */


/* ----- commands for the ioctl like i2c_command call:
 * note that additional calls are defined in the algorithm and hw 
 *	dependent layers - these can be listed here, or see the 
 *	corresponding header files.
 */
				/* -> bit-adapter specific ioctls	*/
#define I2C_RETRIES	0x0701	/* number of times a device address      */
				/* should be polled when not            */
                                /* acknowledging 			*/
#define I2C_TIMEOUT	0x0702	/* set timeout - call with int 		*/


/* this is for i2c-dev.c	*/
#define I2C_SLAVE	0x0703	/* Change slave address			*/
				/* Attn.: Slave address is 7 or 10 bits */
#define I2C_SLAVE_FORCE	0x0706	/* Change slave address			*/
				/* Attn.: Slave address is 7 or 10 bits */
				/* This changes the address, even if it */
				/* is already taken!			*/
#define I2C_TENBIT	0x0704	/* 0 for 7 bit addrs, != 0 for 10 bit	*/

#define I2C_FUNCS	0x0705	/* Get the adapter functionality */
#define I2C_RDWR	0x0707	/* Combined R/W transfer (one stop only)*/
#define I2C_PEC		0x0708	/* != 0 for SMBus PEC                   */
#if 0
#define I2C_ACK_TEST	0x0710	/* See if a slave is at a specific address */
#endif

#define I2C_SMBUS	0x0720	/* SMBus-level access */

/* -- i2c.h -- */


/* Note: 10-bit addresses are NOT supported! */

/* This is the structure as used in the I2C_SMBUS ioctl call */
struct i2c_smbus_ioctl_data {
	char read_write;
	__u8 command;
	int size;
	union i2c_smbus_data *data;
};

/* This is the structure as used in the I2C_RDWR ioctl call */
struct i2c_rdwr_ioctl_data {
	struct i2c_msg *msgs;	/* pointers to i2c_msgs */
	int nmsgs;		/* number of i2c_msgs */
};


static inline __s32 i2c_smbus_access(int file, char read_write, __u8 command, 
                                     int size, union i2c_smbus_data *data)
{
	struct i2c_smbus_ioctl_data args;

	args.read_write = read_write;
	args.command = command;
	args.size = size;
	args.data = data;
	return ioctl(file,I2C_SMBUS,&args);
}


static inline __s32 i2c_smbus_write_quick(int file, __u8 value)
{
	return i2c_smbus_access(file,value,0,I2C_SMBUS_QUICK,NULL);
}
	
static inline __s32 i2c_smbus_read_byte(int file)
{
	union i2c_smbus_data data;
	if (i2c_smbus_access(file,I2C_SMBUS_READ,0,I2C_SMBUS_BYTE,&data))
		return -1;
	else
		return 0x0FF & data.byte;
}

static inline __s32 i2c_smbus_write_byte(int file, __u8 value)
{
	return i2c_smbus_access(file,I2C_SMBUS_WRITE,value,
	                        I2C_SMBUS_BYTE,NULL);
}

static inline __s32 i2c_smbus_read_byte_data(int file, __u8 command)
{
	union i2c_smbus_data data;
	if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
	                     I2C_SMBUS_BYTE_DATA,&data))
		return -1;
	else
		return 0x0FF & data.byte;
}

static inline __s32 i2c_smbus_write_byte_data(int file, __u8 command, 
                                              __u8 value)
{
	union i2c_smbus_data data;
	data.byte = value;
	return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
	                        I2C_SMBUS_BYTE_DATA, &data);
}

static inline __s32 i2c_smbus_read_word_data(int file, __u8 command)
{
	union i2c_smbus_data data;
	if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
	                     I2C_SMBUS_WORD_DATA,&data))
		return -1;
	else
		return 0x0FFFF & data.word;
}

static inline __s32 i2c_smbus_write_word_data(int file, __u8 command, 
                                              __u16 value)
{
	union i2c_smbus_data data;
	data.word = value;
	return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
	                        I2C_SMBUS_WORD_DATA, &data);
}

static inline __s32 i2c_smbus_process_call(int file, __u8 command, __u16 value)
{
	union i2c_smbus_data data;
	data.word = value;
	if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
	                     I2C_SMBUS_PROC_CALL,&data))
		return -1;
	else
		return 0x0FFFF & data.word;
}


/* Returns the number of read bytes */
static inline __s32 i2c_smbus_read_block_data(int file, __u8 command, 
                                              __u8 *values)
{
	union i2c_smbus_data data;
	int i;
	if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
	                     I2C_SMBUS_BLOCK_DATA,&data))
		return -1;
	else {
		for (i = 1; i <= data.block[0]; i++)
			values[i-1] = data.block[i];
		return data.block[0];
	}
}

static inline __s32 i2c_smbus_write_block_data(int file, __u8 command, 
                                               __u8 length, __u8 *values)
{
	union i2c_smbus_data data;
	int i;
	if (length > 32)
		length = 32;
	for (i = 1; i <= length; i++)
		data.block[i] = values[i-1];
	data.block[0] = length;
	return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
	                        I2C_SMBUS_BLOCK_DATA, &data);
}

/* Returns the number of read bytes */
static inline __s32 i2c_smbus_read_i2c_block_data(int file, __u8 command,
                                                  __u8 *values)
{
	union i2c_smbus_data data;
	int i;
	if (i2c_smbus_access(file,I2C_SMBUS_READ,command,
	                      I2C_SMBUS_I2C_BLOCK_DATA,&data))
		return -1;
	else {
		for (i = 1; i <= data.block[0]; i++)
			values[i-1] = data.block[i];
		return data.block[0];
	}
}

static inline __s32 i2c_smbus_write_i2c_block_data(int file, __u8 command,
                                               __u8 length, __u8 *values)
{
	union i2c_smbus_data data;
	int i;
	if (length > 32)
		length = 32;
	for (i = 1; i <= length; i++)
		data.block[i] = values[i-1];
	data.block[0] = length;
	return i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
	                        I2C_SMBUS_I2C_BLOCK_DATA, &data);
}

/* Returns the number of read bytes */
static inline __s32 i2c_smbus_block_process_call(int file, __u8 command,
                                                 __u8 length, __u8 *values)
{
	union i2c_smbus_data data;
	int i;
	if (length > 32)
		length = 32;
	for (i = 1; i <= length; i++)
		data.block[i] = values[i-1];
	data.block[0] = length;
	if (i2c_smbus_access(file,I2C_SMBUS_WRITE,command,
	                     I2C_SMBUS_BLOCK_PROC_CALL,&data))
		return -1;
	else {
		for (i = 1; i <= data.block[0]; i++)
			values[i-1] = data.block[i];
		return data.block[0];
	}
}


#endif /* LIB_I2CDEV_H */