中断.txt

自己写的 51单片机的中断程序

#include<reg52.h>
#define uint unsigned int 
#define uchar unsigned char 
sbit dula=P3^0;
sbit wela=P3^1;
//特殊位定义
sbit P24=P2^4;
sbit P25=P2^5;
sbit P26=P2^6;
sbit P27=P2^7;//位选
sbit d1=P1^3;
uchar num,num1;tt;
uchar code table[]={
0x3f,0x06,0x5b,0x4f,
0x66,0x6d,0x7d,0x07,
0x7f,0x6f,0x77,0x7c,
0x39,0x5e,0x79,0x71};
void delay(uint z);
void main()
{
	num=0;
	tt=0;
	TMOD=0x11;//设置定时器0为工作方式1
	TH0=(65536-10000)/256;
	TL0=(65536-10000)%256;
	TH1=(65536-20000)/256;
	TL1=(65536-20000)%256;
	EA=1;//开总中断
	ET0=1;//开定时器0中断
	ET1=1;
	TR0=1;//启动定时器0
	TR1=1;
	wela=1;//11101010
	P0=0x08;
	wela=0;
	dula=1;
	P0=0x09;
	dula=0;
	while(1)
	{
		if(num1==25)
			{
				num1=0;
				P1=~P1;
			}
		if(tt==100)
		   {
				tt=0;
				num++;
				if(num==16)
				num=0;
				dula=1;
				P0=table[num];
				dula=0;	
			}
	}
}

void delay(uint z)
{
	uint x,y;
	for(x=z;x>0;x--)
		for(y=110;y>0;y--);	
}

void time0() interrupt 1
{
	TH0=(65536-10000)/256;
	TL0=(65536-10000)%256;
	tt++;
}
void time1() interrupt 3
{
	TH1=(65536-20000)/256;
	TL1=(65536-20000)%256;
	num1++;	
}