📄 vga.syr
字号:
Release 7.1i - xst H.38Copyright (c) 1995-2005 Xilinx, Inc. All rights reserved.--> Parameter TMPDIR set to __projnavCPU : 0.00 / 0.38 s | Elapsed : 0.00 / 0.00 s --> Parameter xsthdpdir set to ./xstCPU : 0.00 / 0.38 s | Elapsed : 0.00 / 0.00 s --> Reading design: vga.prjTABLE OF CONTENTS 1) Synthesis Options Summary 2) HDL Compilation 3) HDL Analysis 4) HDL Synthesis 5) Advanced HDL Synthesis 5.1) HDL Synthesis Report 6) Low Level Synthesis 7) Final Report 7.1) Device utilization summary 7.2) TIMING REPORT=========================================================================* Synthesis Options Summary *=========================================================================---- Source ParametersInput File Name : "vga.prj"Input Format : mixedIgnore Synthesis Constraint File : NO---- Target ParametersOutput File Name : "vga"Output Format : NGCTarget Device : xc3s400-5-pq208---- Source OptionsTop Module Name : vgaAutomatic FSM Extraction : YESFSM Encoding Algorithm : AutoFSM Style : lutRAM Extraction : YesRAM Style : AutoROM Extraction : YesROM Style : AutoMux Extraction : YESDecoder Extraction : YESPriority Encoder Extraction : YESShift Register Extraction : YESLogical Shifter Extraction : YESXOR Collapsing : YESResource Sharing : YESMultiplier Style : autoAutomatic Register Balancing : No---- Target OptionsAdd IO Buffers : YESGlobal Maximum Fanout : 500Add Generic Clock Buffer(BUFG) : 8Register Duplication : YESEquivalent register Removal : YESSlice Packing : YESPack IO Registers into IOBs : auto---- General OptionsOptimization Goal : SpeedOptimization Effort : 1Keep Hierarchy : NOGlobal Optimization : AllClockNetsRTL Output : YesWrite Timing Constraints : NOHierarchy Separator : /Bus Delimiter : <>Case Specifier : maintainSlice Utilization Ratio : 100Slice Utilization Ratio Delta : 5---- Other Optionslso : vga.lsoRead Cores : YEScross_clock_analysis : NOverilog2001 : YESsafe_implementation : NoOptimize Instantiated Primitives : NOuse_clock_enable : Yesuse_sync_set : Yesuse_sync_reset : Yesenable_auto_floorplanning : No==================================================================================================================================================* HDL Compilation *=========================================================================Compiling vhdl file "D:/ASIC设计/zoumigong/vga.vhd" in Library work.Entity <VGA> compiled.Entity <VGA> (Architecture <Behavioral>) compiled.=========================================================================* HDL Analysis *=========================================================================Analyzing Entity <vga> (Architecture <Behavioral>).Entity <vga> analyzed. Unit <vga> generated.=========================================================================* HDL Synthesis *=========================================================================Synthesizing Unit <vga>. Related source file is "D:/ASIC设计/zoumigong/vga.vhd". Found 1-bit register for signal <red_out>. Found 1-bit register for signal <green_out>. Found 1-bit register for signal <blue_out>. Found 1-bit register for signal <horiz_sync_out>. Found 1-bit register for signal <vert_sync_out>. Found 10-bit register for signal <pixel_row>. Found 10-bit register for signal <pixel_column>. Found 11-bit comparator lessequal for signal <$n0007> created at line 82. Found 11-bit comparator lessequal for signal <$n0013> created at line 76. Found 11-bit comparator greatequal for signal <$n0017> created at line 64. Found 11-bit comparator greatequal for signal <$n0018> created at line 64. Found 11-bit comparator lessequal for signal <$n0019> created at line 70. Found 11-bit comparator greatequal for signal <$n0020> created at line 70. Found 11-bit comparator lessequal for signal <$n0021> created at line 56. Found 11-bit comparator greatequal for signal <$n0022> created at line 56. Found 10-bit up counter for signal <h_count>. Found 1-bit register for signal <horiz_sync>. Found 10-bit up counter for signal <v_count>. Found 1-bit register for signal <vert_sync>. Found 1-bit register for signal <video_on_h>. Found 1-bit register for signal <video_on_v>. Summary: inferred 2 Counter(s). inferred 29 D-type flip-flop(s). inferred 8 Comparator(s).Unit <vga> synthesized.=========================================================================* Advanced HDL Synthesis *=========================================================================Advanced RAM inference ...Advanced multiplier inference ...Advanced Registered AddSub inference ...Dynamic shift register inference ...=========================================================================HDL Synthesis ReportMacro Statistics# Counters : 2 10-bit up counter : 2# Registers : 11 1-bit register : 9 10-bit register : 2# Comparators : 8 11-bit comparator greatequal : 4 11-bit comparator lessequal : 4==================================================================================================================================================* Low Level Synthesis *=========================================================================Optimizing unit <vga> ...Loading device for application Rf_Device from file '3s400.nph' in environment C:/Xilinx.Mapping all equations...Building and optimizing final netlist ...Found area constraint ratio of 100 (+ 5) on block vga, actual ratio is 1.=========================================================================* Final Report *=========================================================================Final ResultsRTL Top Level Output File Name : vga.ngrTop Level Output File Name : vgaOutput Format : NGCOptimization Goal : SpeedKeep Hierarchy : NODesign Statistics# IOs : 29Macro Statistics :# Registers : 13# 1-bit register : 9# 10-bit register : 4# Adders/Subtractors : 2# 10-bit adder : 2# Comparators : 8# 11-bit comparator greatequal: 4# 11-bit comparator lessequal : 4Cell Usage :# BELS : 87# GND : 1# INV : 2# LUT1 : 13# LUT1_L : 5# LUT2 : 1# LUT2_D : 1# LUT2_L : 1# LUT3 : 9# LUT4 : 11# LUT4_D : 1# LUT4_L : 5# MUXCY : 18# VCC : 1# XORCY : 18# FlipFlops/Latches : 49# FD : 5# FDE : 20# FDR : 14# FDRE : 10# Clock Buffers : 1# BUFGP : 1# IO Buffers : 28# IBUF : 3# OBUF : 25=========================================================================Device utilization summary:---------------------------Selected Device : 3s400pq208-5 Number of Slices: 44 out of 3584 1% Number of Slice Flip Flops: 49 out of 7168 0% Number of 4 input LUTs: 47 out of 7168 0% Number of bonded IOBs: 29 out of 141 20% Number of GCLKs: 1 out of 8 12% =========================================================================TIMING REPORTNOTE: THESE TIMING NUMBERS ARE ONLY A SYNTHESIS ESTIMATE. FOR ACCURATE TIMING INFORMATION PLEASE REFER TO THE TRACE REPORT GENERATED AFTER PLACE-and-ROUTE.Clock Information:-----------------------------------------------------+------------------------+-------+Clock Signal | Clock buffer(FF name) | Load |-----------------------------------+------------------------+-------+clock_25Mhz | BUFGP | 49 |-----------------------------------+------------------------+-------+Timing Summary:---------------Speed Grade: -5 Minimum period: 6.401ns (Maximum Frequency: 156.224MHz) Minimum input arrival time before clock: 2.346ns Maximum output required time after clock: 6.216ns Maximum combinational path delay: No path foundTiming Detail:--------------All values displayed in nanoseconds (ns)=========================================================================Timing constraint: Default period analysis for Clock 'clock_25Mhz' Clock period: 6.401ns (frequency: 156.224MHz) Total number of paths / destination ports: 631 / 99-------------------------------------------------------------------------Delay: 6.401ns (Levels of Logic = 3) Source: v_count_3 (FF) Destination: v_count_8 (FF) Source Clock: clock_25Mhz rising Destination Clock: clock_25Mhz rising Data Path: v_count_3 to v_count_8 Gate Net Cell:in->out fanout Delay Delay Logical Name (Net Name) ---------------------------------------- ------------ FDRE:C->Q 4 0.626 1.074 v_count_3 (v_count_3) LUT3:I0->O 1 0.479 0.704 _n000929 (CHOICE265) LUT4:I3->O 1 0.479 0.704 _n000942 (CHOICE270) LUT4:I3->O 10 0.479 0.964 _n000951 (_n0009) FDRE:R 0.892 v_count_0 ---------------------------------------- Total 6.401ns (2.955ns logic, 3.446ns route) (46.2% logic, 53.8% route)=========================================================================Timing constraint: Default OFFSET IN BEFORE for Clock 'clock_25Mhz' Total number of paths / destination ports: 3 / 3-------------------------------------------------------------------------Offset: 2.346ns (Levels of Logic = 2) Source: red (PAD) Destination: red_out (FF) Destination Clock: clock_25Mhz rising Data Path: red to red_out Gate Net Cell:in->out fanout Delay Delay Logical Name (Net Name) ---------------------------------------- ------------ IBUF:I->O 1 0.715 0.976 red_IBUF (red_IBUF) LUT3:I0->O 1 0.479 0.000 _n00051 (_n0005) FD:D 0.176 red_out ---------------------------------------- Total 2.346ns (1.370ns logic, 0.976ns route) (58.4% logic, 41.6% route)=========================================================================Timing constraint: Default OFFSET OUT AFTER for Clock 'clock_25Mhz' Total number of paths / destination ports: 25 / 25-------------------------------------------------------------------------Offset: 6.216ns (Levels of Logic = 1) Source: vert_sync_out (FF) Destination: vert_sync_out (PAD) Source Clock: clock_25Mhz rising Data Path: vert_sync_out to vert_sync_out Gate Net Cell:in->out fanout Delay Delay Logical Name (Net Name) ---------------------------------------- ------------ FD:C->Q 1 0.626 0.681 vert_sync_out (vert_sync_out_OBUF) OBUF:I->O 4.909 vert_sync_out_OBUF (vert_sync_out) ---------------------------------------- Total 6.216ns (5.535ns logic, 0.681ns route) (89.0% logic, 11.0% route)=========================================================================CPU : 6.19 / 6.61 s | Elapsed : 6.00 / 6.00 s --> Total memory usage is 103104 kilobytesNumber of errors : 0 ( 0 filtered)Number of warnings : 0 ( 0 filtered)Number of infos : 0 ( 0 filtered)
⌨️ 快捷键说明
复制代码
Ctrl + C
搜索代码
Ctrl + F
全屏模式
F11
切换主题
Ctrl + Shift + D
显示快捷键
?
增大字号
Ctrl + =
减小字号
Ctrl + -