acs1_entity19.vhd

这是一个计算维特比译码的程序

-- -------------------------------------------------------------
--
-- Module: ACS1_entity19
-- Simulink Path: hdlcoderviterbi/viterbi_block/ACS Unit/ACS/Subsystem3/Butterfly1/ACS1
-- Created: 2009-03-24 16:23:32
-- Hierarchy Level: 5
--
--
-- -------------------------------------------------------------
LIBRARY IEEE;
USE IEEE.std_logic_1164.ALL;
USE IEEE.numeric_std.ALL;
use IEEE.std_logic_unsigned.all;
ENTITY ACS1_entity19 IS
  PORT( clk                               :   IN    std_logic;
        reset                             :   IN    std_logic;
        enb                               :   IN    std_logic;
        BM0                               :   IN    std_logic_vector(3 DOWNTO 0);   
        SM0                               :   IN    std_logic_vector(3 DOWNTO 0);   
        BM1                               :   IN    std_logic_vector(3 DOWNTO 0);   
        SM1                               :   IN    std_logic_vector(3 DOWNTO 0);   
        SM                                :   OUT   std_logic_vector(3 DOWNTO 0);   
        DEC                               :   OUT   std_logic
        );
END ACS1_entity19;


ARCHITECTURE rtl OF ACS1_entity19 IS

  -- Signals
  SIGNAL s                                : std_logic_vector(3 DOWNTO 0);   
  SIGNAL s_1                              : std_logic_vector(3 DOWNTO 0);   
  SIGNAL Sum_of_Elements1_out1            : std_logic_vector(3 DOWNTO 0);   
  SIGNAL s_2                              : std_logic_vector(3 DOWNTO 0);   
  SIGNAL s_3                              : std_logic_vector(3 DOWNTO 0);   
  SIGNAL Sum_of_Elements_out1             : std_logic_vector(3 DOWNTO 0);   
  SIGNAL Relational_Operator1_out1        : std_logic;
  SIGNAL Switch_out1                      : std_logic_vector(3 DOWNTO 0);   
  SIGNAL Logical_Operator_out1            : std_logic;
  SIGNAL add_cast                         : std_logic_vector(3 DOWNTO 0);   
  SIGNAL add_cast_1                       : std_logic_vector(3 DOWNTO 0);   
  SIGNAL add_cast_2                       : std_logic_vector(3 DOWNTO 0);   
  SIGNAL add_cast_3                       : std_logic_vector(3 DOWNTO 0);   

BEGIN
  s <= BM0;
  s_1 <= SM0;

  add_cast <= s;
  add_cast_1 <= s_1;
  Sum_of_Elements1_out1 <= add_cast + add_cast_1;
  


  s_2 <= BM1;
  s_3 <= SM1;

  add_cast_2 <= s_2;
  add_cast_3 <= s_3;
  Sum_of_Elements_out1 <= add_cast_2 + add_cast_3;
  
  Relational_Operator1_out1 <= '1' WHEN ( Sum_of_Elements1_out1 <= Sum_of_Elements_out1 ) ELSE '0';


  Switch_out1 <= Sum_of_Elements1_out1 WHEN ( Relational_Operator1_out1 = '1' ) ELSE
                 Sum_of_Elements_out1;

  SM <= std_logic_vector(Switch_out1);

  Logical_Operator_out1 <= NOT(Relational_Operator1_out1);


  DEC <= Logical_Operator_out1;

END rtl;